A multi-tracer approach to delineate groundwater dynamics in the Rio Actopan Basin,Veracruz State,Mexico     

Juan Pérez Quezadas  Victor M. Heilweil  Alejandra Cortés Silva  Luis Araguas  María del Rocío Salas Ortega 《Hydrogeology Journal》2016,24(8):1953-1966

Geochemistry and environmental tracers were used to understand groundwater resources, recharge processes, and potential sources of contamination in the Rio Actopan Basin, Veracruz State, Mexico. Total dissolved solids are lower in wells and springs located in the basin uplands compared with those closer to the coast, likely associated with rock/water interaction. Geochemical results also indicate some saltwater intrusion near the coast and increased nitrate near urban centers. Stable isotopes show that precipitation is the source of recharge to the groundwater system. Interestingly, some high-elevation springs are more isotopically enriched than average annual precipitation at higher elevations, indicating preferential recharge during the drier but cooler winter months when evapotranspiration is reduced. In contrast, groundwater below 1,200 m elevation is more isotopically depleted than average precipitation, indicating recharge occurring at much higher elevation than the sampling site. Relatively cool recharge temperatures, derived from noble gas measurements at four sites (11–20 °C), also suggest higher elevation recharge. Environmental tracers indicate that groundwater residence time in the basin ranges from 12,000 years to modern. While this large range shows varying groundwater flowpaths and travel times, ages using different tracer methods (¹⁴C, ³H/³He, CFCs) were generally consistent. Comparing multiple tracers such as CFC-12 with CFC-113 indicates piston-flow to some discharge points, yet binary mixing of young and older groundwater at other points. In summary, groundwater within the Rio Actopan Basin watershed is relatively young (Holocene) and the majority of recharge occurs in the basin uplands and moves towards the coast.  相似文献   

Structural and Functional Composition of Benthic Nematode Assemblages During a Natural Recovery Process of <Emphasis Type="Italic">Zostera noltii</Emphasis> Seagrass Beds     

Patrick Materatski  Anna-Maria Vafeiadou  Tom Moens  Helena Adão 《Estuaries and Coasts》2016,39(5):1478-1490

In 2008, the stable seagrass beds of the Mira estuary (SW Portugal) disappeared completely; however, during 2009, they have begun to present early symptoms of natural recovery, characterised by a strongly heterogeneous distribution. This study was designed to investigate the spatial and temporal variability patterns of species composition, densities and trophic composition of the benthic nematode assemblages in this early recovery process, at two sampling sites with three stations each and at five sampling occasions. Because of the erratic and highly patchy seagrass recovery and the high environmental similarity of the two sampling sites, we expected within-site variability in nematode assemblages to exceed between-site variability. However, contrary to that expectation, whilst nematode genus composition was broadly similar between sites, nematode densities differed significantly between sites, and this between-site variability exceeded within-site variability. This may be linked to differences in the Zostera recovery patterns between both sites. In addition, no clear temporal patterns of nematode density, trophic composition and diversity were evident. Nematode assemblages generally resembled those of other estuarine muddy intertidal areas, which have a high tolerance of stress conditions.  相似文献   

Metallic Mineral Resources in the Twenty-First Century. I. Historical Extraction Trends and Expected Demand     

Alberto E. Patiño Douce 《Natural Resources Research》2016,25(1):71-90

Industrial, technological, and economic developments depend on the availability of metallic raw materials. As a greater fraction of the Earth’s population has become part of developed economies and as developed societies have become more affluent, the demand on metallic mineral resources has increased. Yet metallic minerals are non-renewable natural resources, the supply of which, even if unknown and potentially large, is finite. An analysis of historical extraction trends for eighteen metals, going back to the year 1900, demonstrates that demand of metallic raw materials has increased as a result of both increase in world population and increase in per-capita consumption. These eighteen metals can be arranged into four distinct groups, for each of which it is possible to identify a consistent pattern of per-capita demand as a function of time. These patterns can, in turn, be explained in terms of the industrial and technological applications, and in some cases conventional uses as well, of the metals in each group. Under the assumption that these patterns will continue into the future, and that world population will grow by no more than about 50% by the year 2100, one can estimate the amount of metallic raw materials that will be required to sustain the world’s economy throughout the twenty-first century. From the present until the year 2100, the world can be expected to require about one order of magnitude more metal than the total amount of metal that fueled technological and economic growth between the age of steam and the present day. For most of the metals considered here, this corresponds to 5–10 times the amount of metal contained in proven ore reserves. The two chief driving factors of this expected demand are growth in per-capita consumption and present-day absolute population numbers. World population is already so large that additional population growth makes only a small contribution to the expected future demand of metallic raw materials. It is not known whether or not the amount of metal required to sustain the world’s economy throughout this century exists in exploitable mineral resources. In the accompanying paper, I show that it is nevertheless possible to make statistical inferences about the size distribution of the mineral deposits that will need to be discovered and developed in order to satisfy the expected demand. Those results neither prove nor disprove that the needed resources exist but can be used to improve our understanding of the challenges facing future supply of metallic raw materials.  相似文献   

Sequence hierarchy in a Mesoproterozoic interior sag basin: from basin fill to reservoir scale,the Tombador Formation,Chapada Diamantina Basin,Brazil          下载免费PDF全文

A. J. C. Magalhães  G. P. Raja Gabaglia  C. M. S. Scherer  M. B. Bállico  F. Guadagnin  E. Bento Freire  L.R. Silva Born  O. Catuneanu 《Basin Research》2016,28(3):393-432

The Tombador Formation exhibits depositional sequence boundaries placed at the base of extensive amalgamated fluvial sand sheets or at the base of alluvial fan conglomeratic successions that indicate basinward shifts of facies. The hierarchy system that applies to the Tombador Formation includes sequences of different orders, which are defined as follows: sequences associated with a particular tectonic setting are designated as ‘first order’ and are separated by first‐order sequence boundaries where changes in the tectonic setting are recorded; second‐order sequences represent the major subdivisions of a first‐order sequence and reflect cycles of change in stratal stacking pattern observed at 10² m scales (i.e., 200–300 m); changes in stratal stacking pattern at 10¹ m scales indicate third‐order sequences (i.e., 40–70 m); and changes in stratal stacking pattern at 10⁰ m scales are assigned to the fourth order (i.e., 8–12 m). Changes in palaeogeography due to relative sea level changes are recorded at all hierarchical levels, with a magnitude that increases with the hierarchical rank. Thus, the Tombador Formation corresponds to one‐first‐order sequence, representing a distinct intracratonic sag basin fill in the polycyclic history of the Espinhaço Supergroup in Chapada Diamantina Basin. An angular unconformity separates fluvial‐estuarine to alluvial fan deposits and marks the second‐order boundary. Below the angular unconformity the third‐order sequences record fluvial to estuarine deposition. In contrast, above the angular unconformity these sequences exhibit continental alluvial successions composed conglomerates overlain by fluvial and eolian strata. Fourth‐order sequences are recognized within third‐order transgressive systems tract, and they exhibit distinct facies associations depending on their occurrence at estuarine or fluvial domains. At the estuarine domain, they are composed of tidal channel, tidal bar and overlying shoreface heterolithic strata. At the fluvial domain the sequences are formed of fluvial deposits bounded by fine‐grained or tidal influenced intervals. Fine grained intervals are the most reliable to map in fourth‐order sequences because of their broad laterally extensive sheet‐like external geometry. Therefore, they constitute fourth‐order sequence boundaries that, at the reservoir approach, constitute the most important horizontal heterogeneity and, hence, the preferable boundaries of production zones. The criteria applied to assign sequence hierarchies in the Tombador Formation are based on rock attributes, are easy to apply, and can be used as a baseline for the study of sequence stratigraphy in Precambrian and Phanerozoic basins placed in similar tectonic settings.  相似文献   

Multi-temporal InSAR evidence of ground subsidence induced by groundwater withdrawal: the Montellano aquifer (SW Spain)     

Ana Ruiz-Constán  Antonio M. Ruiz-Armenteros  Francisco Lamas-Fernández  Sergio Martos-Rosillo  J. Manuel Delgado  David P. S. Bekaert  Joaquim João Sousa  Antonio J. Gil  Miguel Caro Cuenca  Ramon F. Hanssen  Jesús Galindo-Zaldívar  Carlos Sanz de Galdeano 《Environmental Earth Sciences》2016,75(3):242

  相似文献   

Snowmelt contribution to the sustainability of the irrigated Mendoza’s Oasis,Argentina: an isotope study     

Hector Massone  Daniel Martinez  Alberto Vich  Mauricio Quiroz Londoño  Darío Trombotto  Sebastián Grondona 《Environmental Earth Sciences》2016,75(6):520

  相似文献   

Deep seismic exploration of the Iberian Microplate     

Juvenal Andres  David Marti  Ignacio Marzan  Imma Palomeras  Puy Ayarz  Fernando Simancas  DavidMartinez-Poyatos  Antonio Azor  Francisco Gonzalez-Lodeiro?  Jordi Diaz  Ramon Carbonel 《《地质学报》英文版》2018,92(Z1):11-11

  相似文献   

High-dimensional geostatistical history matching     

João Carneiro  Leonardo Azevedo  Maria Pereira 《Computational Geosciences》2018,22(2):607-622

Hydrocarbon reservoir modelling and characterisation is a challenging subject within the oil and gas industry due to the lack of well data and the natural heterogeneities of the Earth’s subsurface. Integrating historical production data into the geo-modelling workflow, commonly designated by history matching, allows better reservoir characterisation and the possibility of predicting the reservoir behaviour. We present herein a geostatistical-based multi-objective history matching methodology. It starts with the generation of an initial ensemble of the subsurface petrophysical property of interest through stochastic sequential simulation. Each model is then ranked according the match between its dynamic response, after fluid flow simulation, and the observed available historical production data. This enables building regionalised Pareto fronts and the definition of a large ensemble of optimal subsurface Earth models that fit all the observed production data without compromising the exploration of the uncertainty space. The proposed geostatistical multi-objective history matching technique is successfully implemented in a benchmark synthetic reservoir dataset, the PUNQ-S3, where 12 objectives are targeted.  相似文献   

An orthotropic interface damage model for simulating drying processes in soils     

Osvaldo Manzoli  Marcelo Sánchez  Michael Maedo  Jumanah Hajjat  Leonardo J. N. Guimarães 《Acta Geotechnica》2018,13(5):1171-1186

The study of drying process in soils has received an increased attention in the last few years. This is very complex phenomenon that generally leads to the formation and propagation of desiccation cracks in the soil mass. In recent engineering applications, high aspect ratio elements have proved to be well suited to tackle this type of problem using finite elements. However, the modeling of interfaces between materials with orthotropic properties that generally exist in this type of problem using standard (isotropic) constitutive model is very complex and challenging in terms of the mesh generation, leading to very fine meshes that are intensive CPU demanding. A novel orthotropic interface mechanical model based on damage mechanics and capable of dealing with interfaces between materials in which the strength depends on the direction of analysis is proposed in this paper. The complete mathematical formulation is presented together with the algorithm suggested for its numerical implementation. Some simple yet challenging synthetic benchmarks are analyzed to explore the model capabilities. Laboratory tests using different textures at the contact surface between materials were conducted to evaluate the strengths of the interface in different directions. These experiments were then used to validate the proposed model. Finally, the approach is applied to simulate an actual desiccation test involving an orthotropic contact surface. In all the application cases the performance of the model was very satisfactory.  相似文献   

Groundwater characteristics within loessic deposits: the coastal springs of Los Acantilados,Mar del Plata,Argentina     

Federico Ignacio Isla  Orlando Mauricio Quiroz Londoño  Luis Camilo Cortizo 《Environmental Earth Sciences》2018,77(17):610

The urban growth of the southern neighborhoods of Mar del Plata City provoked significant changes in the groundwater balance of the loessic sequences. These regional loessic levels with a significant portion of volcanic ash layers were reported subject to fluoride and nitrate concentrations. Residential houses pump from sands located 70 m depth and withdraw the sewages to depths less than 5 m. These effects cause significant local and seasonal (summer) increments of the water table outcropping via springs at certain unconformities of the coastal cliffs. A mathematical model was applied to analyze the water level lowering at the productive levels, while there is a decrease in the quality of the upper levels subject to waste discharges. Much of this groundwater flow is concentrated in unconformities between different types of sediments. Human activities have affected the aquifer dynamics increasing the groundwater pumping rates and the return velocity of the sewages. This should be considered in the management strategies of coastal hydric resources.  相似文献