Spatial distribution,mineralogy, and weathering of heavy metals in soils along zinc-concentrate ground transportation routes: implication for assessing heavy metal sources     

Man Jae Kwon  Ju Yeon Lee  Yun Ho Hwang  Soo-kyung Jeon  Jung-Seok Yang  Seong-Taek Yun  Seunghak Lee 《Environmental Earth Sciences》2017,76(23):802

We investigated the source of heavy metals in soils at a site in South Korea, where a ground transportation of zinc-concentrates (ZnS, sphalerite) occurs daily. Seventy soil samples were collected at the site and analyzed for residual concentrations of heavy metals, as well as their chemical and mineralogical properties. Enrichment factor was calculated based on local geochemical background level of metals in soils and confirmed the contamination of soils in the area by an anthropogenic source. The concentration data were also subjected to a Pearson correlation analysis to determine the possible influences of anthropogenic sources and identify the primary source. A slight negative correlation between heavy metals and Al, and a weak correlation between heavy metals and Fe implied that the heavy metals originated from anthropogenic inputs rather than a geogenic source. A strong positive linear correlation between Zn and other heavy metals (i.e., As, Cd, Cu, Pb, r ≥ 0.96, p ≤ 0.001) suggested the influence of a single anthropogenic source of zinc-concentrates containing all of these heavy metals. Zinc-concentrate oxidation and leaching experiments, which mimicked physical and chemical weathering in the environment, indicated that zinc-concentrate could be transformed to zinc oxides and release Cd and Pb upon precipitation. The findings in this study provide an insight into the fate of the Zn that the original form of zinc-concentrate would not remain in the soil after long-term weathering, which should be considered when source of heavy metals is identified.  相似文献   

Concentrations of heavy metals in marine wild fishes captured from the southern sea of Korea and associated health risk assessments     

Dong-Woon Hwang  Seong-Soo Kim  Seong-Gil Kim  Dong-Sun Kim  Tae-Hoon Kim 《Ocean Science Journal》2017,52(4):527-536

Concentrations of heavy metals (As, Cd, Cr, Cu, Hg, Pb, and Zn) were determined in edible parts (muscle) of 34 marine wild fish caught from the southern sea of Korea in 2007 and 2008 in order to understand the accumulation pattern of heavy metals in wild fish and to assess the potential health risk posed by fish consumption. The highest concentrations in the muscle of 17 pelagic and 17 demersal fishes were Zn and As, respectively, while the lowest concentration in both fishes was Cd. The mean concentrations of all metals except As in wild fish were much lower than the regulatory limits for fish and fishery products applied in a number of countries. Unlike other metals, As concentration in wild fish of this study region was relatively higher than that found in other country. Estimated daily intake (EDI) of the metals was in the range of 0.05% to 22.5% of the provisional maximum tolerable daily intakes (PMTDI). Similarly, the target hazard quotient (THQ) was below 1.0 for each metal. These results imply that the consumption of the investigated wild fish do not cause significant adverse health effects.  相似文献   

Design formulations for supplemental viscous dampers to highway bridges     

Jenn‐Shin Hwang  Yi‐Shane Tseng 《地震工程与结构动力学》2005,34(13):1627-1642

Design formulas for supplemental viscous dampers to building structures are readily available in FEMA provisions and MCEER research reports. However, for the design of supplemental viscous dampers corresponding to a desired system damping ratio of highway bridges, there exist, if any, few design guidelines. This is particularly true if the bridge components such as elastomeric bearings, piers and abutment possess different damping ratios, stiffnesses, and lumped masses. In this paper, the design formulas for supplemental viscous dampers to highway bridges have been derived based on the concept of ‘composite damping ratio’. The design formulas can be used to determine the damping coefficients of the dampers corresponding to a desired system damping ratio of the bridge in which different component damping ratios may be assumed for the elastomeric bearings, piers and abutments. The proposed design formulas are numerically validated by comparing the seismic responses of a three‐span bridge equipped with viscous dampers with those of the same bridge without viscous dampers but with an assigned inherent system damping ratio equal to the target system damping ratio. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Analysis of seasonal water pollution based on rainfall feature at Anyang river basin in Korea     

J. G. Han  Y. K. Lee  T. H. Kim  E. J. Hwang 《Environmental Geology》2005,48(4-5):599-608

To determine selected water pollution parameters of the Anyang River (one of the biggest contributory branches of the Han River in Korea) and its main tributaries, the geological and topographical and rainfall features in its basin were investigated, and the resulting data were tabulated. Samples were collected at the upper, mid and down parts of the Anyang River and its branches and were analyzed based on biochemical and chemical methods, Korean biotic index (KBI) and Saprobien systems. Selected parameters of concern include BOD, heavy metals, nonpoint pollution and sewage discharge. The Anyang River basin has a torrential heavy rainfall; however, the rate of rainfall significantly varies from season to season. Water pollution levels in the dry season increase dramatically. The mainstream of the Anyang River is classified as fifth grade polysaprobic water according to Saprobien system. In addition, the biotic index is over 2.5 in overall. General pollution at the junction of the Anyang River and each branch stream varies. Possible countermeasures to improve the water quality of the river include intercept the non-treated waste water and sewage at the Anyang River junction and each branch stream, enforcement of water management during the rainy season, and continuous investment on environmental restoration.  相似文献   

Lake level variations in China from TOPEX/Poseidon altimetry: data quality assessment and links to precipitation and ENSO   总被引：2，自引：0，他引：2  

Cheinway Hwang  Min-Fong Peng  Jinsheng Ning  Jia Luo  Chung-Hsiung Sui 《Geophysical Journal International》2005,161(1):1-11

  相似文献   

Sloshing behaviours of rectangular and cylindrical liquid tanks subjected to harmonic and seismic excitations     

Yung‐Hsiang Chen  Wei‐Shien Hwang  Chia‐Hao Ko 《地震工程与结构动力学》2007,36(12):1701-1717

A numerical and experimental study on the sloshing behaviours of cylindrical and rectangular liquid tanks is addressed. A three‐dimensional boundary element method for space with the second‐order Taylor series expansion in time is established to simulate the sloshing phenomenon and its related physical quantities inside a liquid tank subjected to horizontal harmonic oscillations or recorded earthquake excitations. The small‐scale model experiments are carried out to verify some results of numerical methods in this study. The comparisons between numerical and experimental results show that the numerical method is reliable for both kinds of ground excitations. Finally, the water wave and the base shear force of a rectangular tank due to harmonic excitation are also presented at different frequencies. A huge cylindrical water tank subjected to a recorded earthquake excitation is used for application and discussion. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

Anatomy of a transgressive lag: Panther Tongue Sandstone, Star Point Formation, central Utah     

In-Gul Hwang  Paul L. Heller† 《Sedimentology》2002,49(5):977-999

Abstract The Panther Tongue of the Star Point Formation in central Utah contains a variety of transgressive lag deposits that, when mapped regionally, show a sensitive dependence upon pre‐existing topography of the palaeoshoreline. The Panther Tongue consists of a coarsening‐upward sandstone wedge that prograded into the Western Interior Seaway during Late Cretaceous (Santonian) time. High‐resolution sequence stratigraphic analysis revealed that this member was deposited during the long‐distance (>50 km) regression and transgression of a delta into shallow‐marine environments, containing basal highstand, forced regression, lowstand and transgressive systems tracts. Based on grain size, clast composition, lateral extent and stratigraphic position, the coarse sandstones on top of the Panther Tongue were classified into four types: (1) simple; (2) dispersed; (3) oxidized; and (4) local lags. The simple lag is composed of dark grey coarse sandstone with oyster fragments and shark teeth. This lag is typically extensively bioturbated and massive. Laminated and cross‐bedded units are also common. This type of coarse sandstone is interpreted as a typical transgressive lag. The dispersed lag differs in that it contains abundant mud and commonly occurs as multiple beds in thick intervals of muddy sandstone. Mixing of bay/estuarine and shallow ‐ marine mud with simple lag sand may be responsible for deposition of this type of coarse sandstone. The oxidized lag is distinctive in its reddish colour with extensive bioturbation and is commonly overlain by a simple lag. The local lag is composed of thin‐bedded, dark grey, coarse sandstone, occurring locally between the mouth bar and distributary channel. The variation in types, grain size and bed thickness of the coarse‐grained lags was mainly controlled by antecedent topography as suggested by immediately underlying lithofacies. Relatively thick (≈30 cm) simple lags are present on top of mouth‐bar sandstones, whereas dispersed lags are common on top of the distributary channel sandstone and in bay/estuarine and shallow‐marine mudstones. Erosion of topographic highs (mouth bar) resulted in relatively thick accumulation of simple lags. In topographic low areas such as distributary channel, estuary, bay and shallow‐marine environments, fine‐grained muddy sands that were eroded from the nearby topographic highs were redeposited. Intermittent storm waves transported coarse sands both landward and seaward, forming a dispersed lag. The net effect was reworking of local topographic relief during overall transgression, forming an apparently planar transgressive surface of erosion.  相似文献   

Analysis of some systematic errors affecting altimeter-derived sea surface gradient with application to geoid determination over Taiwan   总被引：3，自引：1，他引：3  

C. Hwang 《Journal of Geodesy》1997,71(2):113-130

This paper analyzes several systematic errors affecting sea surface gradients derived from Seasat, Geosat/ERM, Geosat/GM, ERS-1/35d, ERS-1/GM and TOPEX/POSEIDON altimetry. Considering the data noises, the conclusion is: (1) only Seasat needs to correct for the non-geocentricity induced error, (2) only Seasat and Geosat/GM need to correct for the one cycle per revolution error, (3) only Seasat, ERS-1/GM and Geosat/GM need to correct for the tide model error; over shallow waters it is suggested to use a local tide model not solely from altimetry. The effects of the sea surface topography on gravity and geoid computations from altimetry are significant over areas with major oceanographic phenomena. In conclusion, sea surface gradient is a better data type than sea surface height. Sea surface gradients from altimetry, land gravity anomalies, ship gravity anomalies and elevation data were then used to calculate the geoid over Taiwan by least-squares collocation. The inclusion of sea surface gradients improves the geoid prediction by 27% when comparing the GPS-derived and the predicted geoidal heights, and by 30% when comparing the observed and the geoid-derived deflections of the vertical. The predicted geoid along coastal areas is accurate to 2 cm and can help GPS to do the third-order leveling. Received 22 January 1996; Accepted 13 September 1996  相似文献   

Results of geodetic and geotechnical monitoring of subsidence for Taiwan High Speed Rail operation   总被引：1，自引：0，他引：1  

Cheinway Hwang  Wei-Chia Hung  Chih-Hsi Liu 《Natural Hazards》2008,47(1):1-16

Taiwan High Speed Rail (THSR), which began operations in January 2007, passes through an area in Yunlin County where the largest cumulative subsidence measured during 1992–2006 exceeds 100 cm. Leveling benchmarks, GPS pillars and multi-level monitoring wells were deployed in this area to collect detailed subsidence data from October 2003 to 2006. Leveling is carried out on both ground benchmarks and survey bolts attached to THSR columns. Minimum constraint solutions of leveling networks produce estimated heights accurate to a few mm. Special attention is paid to code smoothing, ionospheric, tropospheric and ocean tidal loading (OTL) effects, so that height estimates from GPS are optimal. Leveling and GPS-derived height changes are consistent to 1 cm, and show that from Stations 210 to 240K of TSHR, the subsidence is bowl shaped. Measurements of sediment compaction in specific depth intervals at three monitoring wells indicate that most of the subsidence is caused by sediment compaction at depths from 50 to 300 m. The major compaction occurs in the interval 220–300 m and is attributed to ground water withdrawal. Large angular deflections as determined from subsidence measurements are detected at some columns, but are below the upper bound (1/1,000) of tolerance specified in the safety code. With the current subsidence and sediment compaction, no significantly reduced loading capacity of the columns is expected to occur. For a safe THSR operation, subsidence and sediment-compaction monitoring should be continued, and current ground water withdrawal in Yunlin must be reduced or stopped.  相似文献   

Investigation of Primary Factors Affecting the Variation of Modeled Oak Pollen Concentrations: A Case Study for Southeast Texas in 2010     

Wonbae Jeon  Yunsoo Choi  Anirban Roy  Shuai Pan  Daniel Price  Mi-Kyoung Hwang  Kyu Rang Kim  Inbo Oh 《Asia-Pacific Journal of Atmospheric Sciences》2018,54(1):33-41

Oak pollen concentrations over the Houston-Galveston-Brazoria (HGB) area in southeastern Texas were modeled and evaluated against in-situ data. We modified the Community Multi-scale Air Quality (CMAQ) model to include oak pollen emission, dispersion, and deposition. The Oak Pollen Emission Model (OPEM) calculated gridded oak pollen emissions, which are based on a parameterized equation considering a plant-specific factor (C _e ), surface characteristics, and meteorology. The simulation period was chosen to be February 21 to April 30 in the spring of 2010, when the observed monthly mean oak pollen concentrations were the highest in six years (2009-2014). The results indicated C _e and meteorology played an important role in the calculation of oak pollen emissions. While C _e was critical in determining the magnitude of oak pollen emissions, meteorology determined their variability. In particular, the contribution of the meteorology to the variation in oak pollen emissions increased with the oak pollen emission rate. The evaluation results using in-situ surface data revealed that the model underestimated pollen concentrations and was unable to accurately reproduce the peak pollen episodes. The model error was likely due to uncertainty in climatology-based C _e used for the estimation of oak pollen emissions and inaccuracy in the wind fields from the Weather Research and Forecast (WRF) model.  相似文献