This study aims to investigate a hybrid gravity base foundation to support offshore wind tower. A new hybrid gravity base foundation considered in this study has five component piles, referred to as ‘piled gravity base foundation’. The three-dimensional finite element analyses were carried out for the piled gravity base foundation subjected to a combined load with a lateral load and overturning moment. The parametric analyses were undertaken varying the loading height and direction, the rigidity of the piled gravity base foundation, the field soil layers, and the clay strength. Overall, the response of the piled gravity base foundation was significantly influenced by the interaction between the cone base piles and the surrounding soil. The increased strength of the soil led to a significant reduction of the pile and gravity base foundation responses, in terms of the bending moments, axial forces, lateral displacements, and rotations. 相似文献
This study has evaluated the vertical bearing capacity by conducting static load tests for noise-free and vibration-free screw pretensioned spun high-strength concrete (PHC) piles installed using two different methods (end-squirting shoe and pre-boring methods). Vertical bearing capacity differences seem to occur due to the displacement of soils near the external circumference of a pile, depending on the installation method. A method by which to evaluate the bearing capacity of screw concrete piles is suggested by considering the equations that already have been used to calculate the bearing capacity of piles. Based on static load tests and analysis, the pile installed using the end-squirting shoe method was assumed to be a bored pile and it was reasonable to use the equation proposed by the Japanese Geotechnical Society. At the same time, the pile installed using the pre-boring method was deemed a low soil displacement pile and so it was reasonable to apply the equations proposed for calculating the bearing capacity of the driven pile suggested by the Architectural Institute of Japan. 相似文献
This article presents the settlement of drilled shafts resulting from their structural deformations. Although drilled shafts are widely used as foundations for settlement-sensitive structures such as bridges and high-rise buildings, the structural deformations of drilled shafts are not typically taken into account in the design process. However, if unexpected structural deformations of drilled shafts cause additional settlement to the foundation, the serviceability of the superstructure can be jeopardized. Unfortunately, very few research efforts have been made to quantify the structural deformation of drilled shafts; this needs to be addressed to accurately predict the settlement of drilled shafts. In this study, we investigate the effect of structural deformation on displacement of axially loaded drilled shafts. Finite element analyses were performed to quantify the structural deformation of drilled shafts. The analysis results indicated that the structural deformation of drilled shafts could be quite significant for long drilled shafts. The main factors that affected the structural deformation of drilled shafts were found to be pile length, the material properties of drilled shafts, and the relative humidity of surrounding soil. An approximate equation is proposed to estimate the long-term deformation of drilled shafts. 相似文献
Little is known regarding how harmful algal bloom species respond to different temperatures in terms of fatty acid production. This study examined the effects of temperature on the growth rates, cell volumes, and fatty acid concentrations and compositions of four harmful algal bloom species (HABs), Akashiwo sanguinea, Alexandrium tamarense, Chattonella ovata, and Prorocentrum minimum. The HABs species were cultured at 15, 20, 25, and 30°C in a nutrient-enriched medium. Three of the species maintained optimal growth rates over a wide range of temperatures, but A. tamarense did not. The cell volumes of each species showed little change over the temperature range. The total fatty acid concentrations in A. sanguinea, A. tamarense and C. ovata decreased as the temperature increased, but P. minimum showed no trend in this respect. Polyunsaturated fatty acids (PUFAs), the key biochemical components that maintain cell membrane fluidity and which are associated with toxicity, decreased in both concentration and proportion of total fatty acids as temperature increased, except in A. sanguinea, in which the proportion of PUFAs to the total fatty acids increased. These reductions in PUFA concentration and proportion could reduce cell membrane fluidity and toxicity in HABs; however, enhanced growth and/or ruptured cells, which are considered more toxic than intact cells, could compensate for the reduced per-cell toxicity. This phenomenon might impact on the marine ecosystem and aquaculture industry. 相似文献
In order to determine the effect of twine thickness on the size-selectivity of the driftnet used for the yellow croaker, size-selectivity tests were conducted with three different twine thicknesses (monofilament diameters of 0.279 mm (number’s method; No. 3), 0.321 mm (No. 4), and 0.360 mm (No. 5)) of driftnets for the yellow croaker in the seas around Chooja-do, Jeju Islands. The selectivity curve was estimated by using Kitahara’s method. In order to determine the physical properties of the twine used in the experimental fishing nets, we measured the breaking load, elongation, and stiffness under both dry and wet conditions. In terms of physical properties, the thinnest twine (No. 3) had the strongest breaking strength per unit cross-sectional area, along with good elongation and excellent flexibility. The thickest twine (No. 5) had the lowest flexibility. In terms of selectivity, the net of No. 3 twine showed the broadest selection range and, thus, a relatively low selectivity compared with the other nets, while the less flexible net of No. 5 twine showed the narrowest selectivity range and high selectivity. In addition, it was found that a thicker twine resulted in a smaller haul of small fish. Therefore, it can be inferred that the thickness of the twine affects the size of the catch and selectivity, and thus the size composition of the catch as well. 相似文献
The locations of areas prone to strong earthquakes (M ≥ 6.0) in the Altai–Sayan–Baikal region are determined. Based on a scheme of morphostructural zoning of the region and by using the CORA-3 pattern recognition algorithm, all intersections of morphostructural lineaments are separated into two classes: the highly seismic intersections in the vicinities of which strong earthquakes can occur and low seismic in the vicinities of which only earthquakes with M < 6.0 are possible. Recognition was performed for the vectors the components of which were measured values of the geological–geophysical characteristics describing the respective intersection. The result obtained allows the zones of high seismic hazard to be identified more reliably in the region.
Solid matrix 3H reference materials are challenging to prepare given the volatile nature of 3H and are often unrepresentative of the range of 3H forms that may be encountered during routine analysis. As a result, few 3H reference materials are currently available, undermining verification of analytical techniques for environmental 3H measurement. To address this, an International Working Group on Organically‐Bound Tritium Analysis determined to produce a tritium natural matrix reference material (NMRM). The reference material comprises marine sediment blended with sewage sludge contaminated with 3H‐organic species arising from authorised discharges from a radiopharmaceutical manufacturing site. Previous studies have demonstrated that the 3H species have persisted in the environment over three decades providing valuable supporting data to underpin the characterisation of the NMRM. The preparation and characterisation of the NMRM are described along with the subsequent application of the reference material in an international intercomparison exercise involving nineteen laboratories from nine countries. A reference value of 168 ± 22 Bq kg?1 was derived from the data arising from the proficiency test. 相似文献
Biofouling, associated with membranes, is considered as a major operational challenge in membrane bioreactor (MBR) technology. Interrupting the process for the formation of biofilm by the action of interspecies quorum quenching (QQ) has received a significant attention since recent years. An antifouling bacterial consortium was identified to improve biofouling inhibition performance during MBR operation. For this purpose, various QQ bacteria were isolated from laboratory-scale MBR using enrichment culture method and identified via 16S rRNA. Potential quenching strains including Enterobacter cloaca, Delftia sp., and Pseudomonas sp. were utilized to control biofouling in the MBR operated in the continuous mode for 38 days. Three laboratory-scale MBRs, including two MBRs with different anti fouling consortium and a control, were operated in parallel under similar operating conditions. Biofouling control by QQ bacteria was compared based on the membrane permeability and EPS secretion from biofilm on the membrane. Both MBRs with antifouling consortium (AC-MBRs) experienced around three times less biofouling as compared to conventional MBR leading to significant decrease in acyl homoserine lactones (AHLs) concentration in the biocake. More than 90, 45, and 49% of COD, NH4–N, and PO43?–P removal efficiencies elucidate that QQ bacterial consortium could effectively reduce membrane biofouling without compromising the MBR efficiency. Comparatively lower concentration of bound EPS in AC-MBRs restricted the bacterial adhesion to membrane resulting in enhanced membrane permeability depicting that a broader range of signal molecules could be hydrolyzed using antifouling consortium than single or no QQ strain in the submerged MBR. 相似文献
The results of studying the features of the hydrogeological structure and chemical and isotope composition of thermal waters from the central part of Vietnam that are characterized by intense manifestations of intrusive magmatism are presented. It is established that low–and high–thermal waters with temperature varying within 30–85°C are developed in the area under study. The value of total mineralization of the hydrotherms ranges from 0.05 to 10.05 g/dm3. It is assumed that the circulation of thermal waters that are different in temperature and chemical composition occurs at two levels. The regular change of the hydrotherm composition in the direction from mineralized chloride sodium, including with increased Ca content, to fresh sodium bicarbonate is revealed. The ratio of δ18O–δ2H isotopes indicates that the water component is based on meteoric water. In the coastal areas, there is an isotope shift towards the ocean waters, which is also confirmed by the hydrogeochemical data. The key factors for forming the chemical composition of the thermal waters in South Trungbo are their genetic type, the interaction processes in the “water–rock–gas–organic substance” system, and their equilibrium–nonequilibrium state. 相似文献
Landslides and debris flows that occur around residential areas are considered, globally, as significant disasters that cause damage to human life and property. With terrain slope defining the flow characteristics of debris flows, flow depth, flow velocity, and impact force vary by time and distance. In particular, when a structure is located in the flow path of debris flows, the flow characteristics of debris flows vary by terrain slope and direction angle. To simulate the flow characteristics of these debris flows, the simulation results obtained by FLO-2D were analyzed with six-stage conditions for the research area. In the analysis, the flow depth, flow velocity, and impact force were estimated on the basis of the outlet of the research area in the presence and absence of structure(s) at certain distances. With this, the variation of the impact force in accordance with the variation of the flow depth of the debris flows was highly similar to the simulation results obtained by FLO-2D, when the correction index (α) of the suggested dynamic impact force equation was 0.3–0.4. There were sections where the estimated value of the impact force was overestimated near the outlet, and it was judged that the fixed values of the terrain factors (width, roughness coefficient, slope, etc.) caused the impact force to be overestimated. However, the correlation analysis showed that the correlation index was above the normal ranges in the suggested dynamic impact force equation for debris flows with the application of the terrain factors. 相似文献