Resistivity mapping using the VLF-MT method around surface fault ruptures of the 1995 Hyogo-ken Nanbu earthquake, Japan   总被引：1，自引：0，他引：1  

Satoru Yamaguchi  Takahisa Murakami  Hiroo Inokuchi 《Island Arc》2001,10(3-4):296-305

Abstract Distinctive fault ruptures, the Nojima Fault and Ogura Fault, appeared along the northwestern coast of Awaji Island at the time of the 1995 Hyogo-ken Nanbu earthquake (Kobe earthquake). In order to delineate the shallow resistivity structures around the faults just after they formed, Very Low Frequency Magnetotelluric (VLF-MT) surveys were made at five sites along the Nojima Fault and at one site along the Ogura Fault. Fourteen transects were made at the one site on the Ogura Fault, and another transect covers the area between the two faults. Changes in apparent resistivity or phase, or both, commonly occur when crossing the surface location of one of the faults, except for the northern transects at OGR-0 on the Ogura Fault. Apparent resistivity values of less than 100 Ωm were observed for Tertiary and Quaternary sediments and values larger than 200 Ωm for granitic rocks. The resistivity structures are related to the morphological characteristics of the fault ruptures. Remarkably conductive zones (less than 10 Ωm in apparent resistivity and 30–40 m in width) were found where the surface displacement is distinct and prominent along a single fault plane. If remarkably conductive zones were formed at the time of the 1995 Hyogo-ken Nanbu earthquake, the results provide a good constraint on the dimensions of a conductive zone near the surface that was made by one earthquake. Alternatively, if characteristic resistivity structures existed prior to the earthquake, the conductive zone was probably formed by some tens of earthquakes in relatively modern times. In this case, this phenomenon is inferred to be a concentration of fracturing in a narrow zone and is associated with the formation of clay minerals, which enhance rock conductivity.  相似文献   

Anomalous Rayleigh-Wave Propagation Along Oceanic Trench     

Yomogida  Kiyoshi  Okuyama  Riko  Nakanishi  Ichiro 《Studia Geophysica et Geodaetica》2002,46(4):691-710

A clear later phase of amplitude larger than the direct surface wave packet was observed at stations in Hokkaido, Japan, for several events of the December 1991 off-Urup earthquake swarm in the Kuril Islands region. From its particle motion, this phase is likely to be a fundamental Rayleigh wave packet that arrived with an azimuth largely deviated from each great-circle direction. As its origin, Nakanishi (1992) proposed that the sea-trench topography in this area as deep as 10 km may produce a narrow zone of low velocity for Rayleigh waves of periods around 15 sec. Following this idea, we compute ray paths and estimate how Rayleigh waves would propagate if we assume that lateral velocity variations are caused only by seafloor topography. We confirm that thick sea water in the trench indeed produces the phase velocity of Rayleigh waves to be smaller than in a surrounding area by the degree over 100%. Such a low-velocity zone appears only in a period range from 12 to 20 sec. Although this strong low-velocity zone disturbs the direction of Rayleigh wave propagation from its great circle, the overall ray paths are not so affected as far as an epicentre is outside this low-velocity zone, that is, off the trench axis. In contrast, the majority of rays are severely distorted for an event within the low-velocity zone or, in other words, in the neighborhood of the trench axis. For such an event, a part of wave energy appears to be trapped in this zone and eventually propagates outwards due to the curvature or bend of trench geometry, resulting in very late arriving waves of large amplitude with an incident direction clearly different from great circles. This phenomenon is observed only at a very limited period range around 16 sec. These theoretical results are consistent with the above mentioned observation of Nakanishi (1992).  相似文献   

Development of a Finite Element Simulator for Crustal Deformation with Large Fault Slipping     

Z. S. Wu  Y. Gao  Y. Murakami 《Pure and Applied Geophysics》2002,159(10):2221-2237

--In this paper, a finite element model for simulating long-term crustal deformation with large slipping along fault interface is developed, where a rate- and state-dependent frictional law is introduced to represent the faulting processes and frictional behaviors of fault interface. Moreover, viscous and plastic material properties are used to simulate pressure solution creep and cataclasis, respectively. Throughout the simulations on a structural model of fault-bend folds, the distributions of the stress invariants, equivalent viscous plastic strain, and the traction on the fault interface are investigated. The sequence of deformation mechanisms during movement over a ramp is discussed. It is also found that this kind of frictional model is suitable to represent the rate-dependent behavior of fault slipping due to the movement over a ramp and the tractions on fault interface for treating the low frictional problem of fault-bend folds.  相似文献   

A crack-like rupture model for the 19 September 1985 Michoacan,Mexico, earthquake     

Stanley D. Ruppert  Kiyoshi Yomogida 《Pure and Applied Geophysics》1992,138(3):407-427

Evidence supporting a smooth crack-like rupture process of the Michoacan earthquake of 1985 is obtained from a major earthquake for the first time. Digital strong motion data from three stations (Caleta de Campos, La Villita, and La Union), recording near-field radiation from the fault, show unusually simple ramped displacements and permanent offsets previously only seen in theoretical models. The recording of low frequency (0 to 1 Hz) near-field waves together with the apparently smooth rupture favors a crack-like model to a step or Haskell-type dislocation model under the constraint of the slip distribution obtained by previous studies. A crack-like rupture, characterized by an approximated dynamic slip function and systematic decrease in slip duration away from the point of rupture nucleation, produces the best fit to the simple ramped displacements observed. Spatially varying rupture duration controls several important aspects of the synthetic seismograms, including the variation in displacement rise times between components of motion observed at Caleta de Campos. Ground motion observed at Caleta de Campos can be explained remarkably well with a smoothly propagating crack model. However, data from La Villita and La Union suggest a more complex rupture process than the simple crack-like model for the south-eastern portion of the fault.  相似文献   

Regional energetics over the North Pacific,South China Sea and the Indonesian seas during winter     

Takio Murakami 《Pure and Applied Geophysics》1977,115(5-6):1283-1301

The energy equation was applied to four limited regions to investigate the basic mechanisms through which area-averaged eddy kinetic energy is maintained during the northern winter. The regions selected for this study are as follows: extratropical North Pacific (24.2°N–44.6°N, 130°E–150°W), tropical eastern North Pacific (0°–19.6°N, 170°W–110°W), South China Sea and. Bay of Bengal (0°–19.6°N, 80°E–140°E), and Timor Sea and eastern Indian Ocean (0°–19.6°S, 80°E–140°E). The zonally averaged upper flows over the first region were found to be barotropically stable. In contrast, they were barotropically unstable over the second region; namely, eddy motions over the tropical eastern North Pacific are maintained by receiving energy from zonal flows via barotropic interaction. The third and fourth regions are characterized by the importance of the conversion process between eddy available potential and eddy kinetic energy.Contribution No. 77-5, Department of Meteorology, University of Hawaii, USA.  相似文献   

Relationship between growth of albite porphyroblasts and deformation in a sambagawa schist, Central Shikoku, Japan     

Kiyoshi Takagi  Ikuo Hara 《Tectonophysics》1979,58(1-2)

Albite porphyroblasts in a basic schist of the Sambagawa metamorphic belt (Besshi—Bashi, Central Shikoku) show zonal variation of inclusions defined by inclusion-free mantles and inclusion-rich cores, though matrix minerals are partly incorporated in the outer zones of the mantles. From comparison of the crystallographic and dimensional fabrics of inclusion and matrix epidote, it has been concluded that the orientation of the principal axes of strain was different for the deformation of matrix fabrics and inclusion fabrics (fabrics produced before formation of cores). Inclusion amphibole in the cores belongs to the actinolite—common hornblende group, with Si content more than 7.0, whereas amphibole in the matrix and outer zones of mantles belongs to the common hornblende group, with Si content less than 7.1. This shows that the metamorphic temperature was higher during the phase of formation of the outer zones of the mantles than during that of the cores. The average direction of maximum growth of the mantles, which has been estimated from differences between the average shapes of porphyroblasts and those of cores, is parallel to the linear orientation of amphibole and epidote in the matrix. The average direction of minimum growth of the mantles coincides with the normal to the schistosity of the matrix. The mantles appear to be of the same generation as the matrix fabrics.  相似文献   

Thermal expansion of fayalite,Fe2SiO4     

Isao Suzuki  Kiyoshi Seya  Humihiko Takei  Yoshio Sumino 《Physics and Chemistry of Minerals》1981,7(2):60-63

Thermal expansion of single-crystal fayalite has been measured by a dilatometric method at temperatures between 25 °C and 850 °C. The results show the presence of anomalous expansion in the b axis, which is correlated to the anomalous variation of elastic moduli with temperature. Grüneisen's parameter is 1.10 and the thermal Debye temperature is 565 K, which is close to the acoustic Debye temperature of 511 K.  相似文献   

Dynamic response of the KII building to the San Fernando earthquake     

Kiyoshi Muto 《地震工程与结构动力学》1972,1(1):33-43

The KII Building was subjected to the San Fernando earthquake on 9 February 1971 without suffering any damage. During the earthquake, strong motion accelerations were recorded at the base, middle and top of the building. The simulation analysis of the building was carried out taking into account the interaction between the building and the soil. The internal viscous damping theory considering the different damping coefficients for the building and the soil was adopted. Comparison of the calculated and observed acceleration time histories as well as the floor response spectra showed satisfactory agreement. On the basis of the response spectrum values, the fact that no damage was observed in this building is justified theoretically.  相似文献   

A Human Damage Prediction Method for Tsunami Disasters Incorporating Evacuation Activities   总被引：1，自引：0，他引：1  

Sugimoto  T.  Murakami  H.  Kozuki  Y.  Nishikawa  K.  Shimada  T. 《Natural Hazards》2003,29(3):587-602

This study presents a tsunami human damage prediction method employing numerical calculation and GIS (Geographical Information System) for Usa town, Tosa City, Shikoku Island, Japan. Sometime near the end of the first half of the twenty-first century, a huge earthquake is predicted to occur along the Nankai trough and costal areas facing the Pacific ocean of Shikoku Island. Much damage due to the resultant tsunamis will be caused, therefore, it is necessary to predict the extent of human damage for every town in high-risk areas.The number of tsunami victims was estimated by population in areas of maximum inundation. The number of deaths as a result of tsunami was estimated by a method which employed accumulated death toll of every area in terms of time and space, taking into account consideration of time necessary to begin to seek refuge after an earthquake, tsunami inundation depth on land, flow velocity and evacuation speed. As a result of this study a rapid decrease in death toll by early evacuation was shown quantitatively for the first time.Thus, with the method presented here, it is possible to estimate the extent of tsunami human damage on coastal regions, and may be useful as a tsunami human damage countermeasure.  相似文献   

Granitoid Types Related to Cretaceous Plutonic Au-Quartz Vein and Cu-Fe Skarn Deposits, Kitakami Mountains, Japan   总被引：1，自引：0，他引：1  

Shunso Ishihara  Hiroyasu Murakami 《Resource Geology》2004,54(3):281-298

Abstract. Early Cretaceous granitic intrusions are associated with Au‐quartz veins and Cu‐Fe skarns in the the Kitakami Mountains, which are underlain by the late Paleozoic of continental margin‐type sedimentary rocks and Mesozoic accretionary complexes. The plutonic rocks are divided into potassic, high‐Sr/Y calc‐alkaline and low‐Sr/Y calc‐alkaline series. All the metallic mineral deposits are spatially associated with small stocks and plugs; they show no consistent association with the larger plutonic bodies. The plutonic rocks generally belong to the magnetite series but less oxidized in the southwestern part of the Kitakami Mountains where Au‐quartz veins occur. The gold deposits are classified into high and low sulfide types. The high sulfide type contains a high volume of sulfide minerals mostly of chalcopyrite, arsenopyrite and pyrrhotite with low bulk Au/Ag ratios. This type occurs almost exclusively in and surrounding the Orikabe pluton, including two most important gold deposits (Oya and Kohoku) of the Kitakami Mountains. The pluton is composed of potassic gabbroids, potassic granitoids of the shoshonite ‐ high‐K calc‐alkaline series (Orikabe type), and less potassic Sasamori‐type granodiorite. All these rocks belong to a moderately oxidized magnetite series. The Orikabe pluton has one of the lowest initial Sr ratio (0.70392) in the Kitakami Mountains, and the Au‐Cu‐dominant ore components of the high sulfide type Au deposits are considered magmatic in origin carried by the juvenile magmas from the upper mantle. The low sulfide type is generally plain quartz vein with a low volume of sulfides and a high bulk Au/Ag ratio. The associated minerals are often scheelite and/or arsenopyrite and pyrrhotite. The ore deposits include historically famed Au‐quartz veins at Shishiori and Ogayu. They are widespread in the southwestern Kitakami Mountains and may be later than the high sulfide type in age, and are hosted most commonly in the sedimentary rocks, which surround small weakly oxidized magnetite‐series plutons of low to intermediate Sr/Y series. These less differentiated intrusions typically include quartz dior‐ite and granodiorite. Some ore components of this type may have derived from the host sedimentary rocks. Among other mineral deposit types in the region, the largest ore deposit is Kamaishi Cu‐Fe skarn (magnetite ores of 58 MT, Fe 50–64 %; Cu 143 KT). It is related to the high‐Sr/Y series Ganidake granodiorite stock, which is a strongly oxidized magnetite‐series body. In contrast, the second largest deposit in the mountains, Akagane deposit, is a similar‐type skarn but associated with an intrusion classified as less oxidized, ilmenite to intermediate series, and that is intermediate in Sr/Y of calc‐alkaline series granodiorite. Degree of magmatic differentiation appears to be not critical factor in the formation of Au‐quartz vein and Cu‐Fe skarn deposits in the region, but is definitely significant for controlling the distribution of the Mo‐mineralization to the east.  相似文献