Temporal variations in the fractal properties of seismicity in the North Anatolian Fault Zone between 31°E and 41°E     

Ali Osman Öncel  Ian Main  Ömer Alptekin  Patience Cowie 《Pure and Applied Geophysics》1996,147(1):147-159

We investigate the nature of temporal variations in the statistical properties of seismicity associated with the North Anatolian Fault Zone between longitudes 31°–41°E during the instrumental period 1900–1992. Temporal variations in the seismicb value and the fractal (correlation) dimensionD _c of earthquake epicenters are examined for earthquakes of magnitudeM _S 4.5, using sliding windows of 100 consecutive events.b varies temporally between 0.6 and 1.0, andD _c between 0.6 and 1.4, both representing significant fluctuations above the errors in measurement technique. A strong negative correlation (r=–0.85) is observed betweenb andD _c , consistent with previous observation of seismicity in Japan and southern California. Major events early in this century (M _S 7) are associated with lowb and highD _c , respectively consistent with greater stress intensity and greater spatial clustering of epicenters—both implying a greater degree of stress concentration at this time.  相似文献   

Expansion of the mutual distance between two planets raised to any negative power     

Osman M. Kamel 《Earth, Moon, and Planets》1982,26(3):239-277

An expression for ^–s in terms of the Poincaré variablesL, , H, K, P. Q has been evaluated. The inclinations of the two planets are referred to a common fixed plane. We neglect in the final formula powers higher than the third of the Poincaré variables.  相似文献   

Excursion to Aylesford and Allington: Saturday,April 27th, 1907     

C.W. Osman  A.C. Young 《Proceedings of the Geologists' Association. Geologists' Association》1907,20(2):104-114

  相似文献   

Fourier techniques for an analysis of eclipsing binary light curves: I     

Osman Demircan 《Astrophysics and Space Science》1979,61(2):499-506

The Fourier techniques developed so far for an analysis of eclipsing binary light curves have been re-discussed. The Fourier coefficients for the analysis have been derived in a simple form of series expansions, in terms of eclipse elements, valid for any type of eclipse (regardless of whetherr ₁r ₂).These coefficients may be utilized to solve the eclipse elements in terms of the observed characteristics of the light curves. A general relation between the observed quantitiesl and , and the eclipse elementsr _1,2,i andL ₁ has also been given in the form of series expansions which can be used for the synthesis of the light curves.  相似文献   

Optimization and modeling of boric acid extraction from colemanite in water saturated with carbon dioxide and sulphur dioxide gases     

Zafer Ekinci  Enes ŞayanAyşe Vildan Beşe  Osman Nuri Ata 《International Journal of Mineral Processing》2007

In this study, the boric acid extraction from colemanite ore in aqueous media saturated by CO₂ and SO₂ gases was studied and the effects of relevant parameters, namely; reaction temperature, solid-to-liquid ratio, mean particle size, stirring speed and reaction time have been investigated on the boric acid extraction from colemanite ore by using the fractional factorial design and central composite design methods. The chosen experimental parameter levels were as follows: reaction temperature, 11.4–58.6 °C; solid-to-liquid ratio, 0.0685–0.1315 g/mL; mean particle size, 0.2835–3 mm; stirring speed, 107–893 rpm; reaction time, 7.125–22.875 min. A model has been developed between the boric acid extraction efficiency from colemanite ore and relevant parameters by means of variance analysis by using the matlab computer software and the obtained model was used to determine optimum conditions. The optimum conditions were found to be as follows: reaction temperature, 41 °C; solid-to-liquid ratio, 0.0685 g/mL; mean particle size, 0.2835 mm; stirring speed, 266 rpm; reaction time, 7 min. The calculated boric acid extraction efficiency from colemanite ore was approximately 99.9% under the optimum conditions.  相似文献   

Pressure–temperature evolution of lawsonite eclogite in Sivrihisar; Tavşanlı Zone–Turkey     

Mete etinkaplan  Osman Candan  Roland Oberhnsli  Romain Bousquet 《Lithos》2008,104(1-4):12-32

The Cretaceous blueschist belt, Tavşanlı Zone, representing the subducted and exhumed northern continental margin of the Anatolide–Tauride platform is exposed in Western Anatolia. The Sivrihisar area east of Tavşanlı is made up of tectonic units consisting of i) metaclastics and conformably overlying massive marbles (coherent blueschist unit), ii) blueschist-eclogite unit, iii) marble–calcschist intercalation and iv) metaperidotite slab. The metaclastics are composed of jadeite–lawsonite–glaucophane and jadeite–glaucophane–chloritoid schists, phengite phyllites, and calcschists with glaucophane–lawsonite metabasite layers. The blueschist-eclogite unit representing strongly sheared, deeply buried and imbricated tectonic slices of accreted uppermost levels of the oceanic crust with minor metamorphosed serpentinite bodies consists of lawsonite-bearing eclogitic metabasites (approximately 90% of the field), lawsonite eclogites, metagabbros, serpentinites, pelagic marbles, omphacite–glaucophane–lawsonite metapelites and metacherts. The mineral assemblage of the lawsonite eclogite (garnet + omphacite > 70%) is omphacite, garnet, lawsonite, glaucophane, phengite and rutile. Lawsonite eclogite lenses are enclosed by garnet–lawsonite blueschist envelopes.Textural evidence from lawsonite eclogites and country rocks reveals that they did not leave the stability field of lawsonite during subduction and exhumation. The widespread preservation of lawsonite in eclogitic metabasites and eclogites can be attributed to rapid subduction and subsequent exhumation in a low geothermal gradient of the oceanic crust material without experiencing a thermal relaxation. Peak P–T conditions of lawsonite eclogites are estimated at 24 ± 1 kbar and 460 ± 25 °C. These P–T conditions indicate a remarkably low geotherm of 6.2 °C/km corresponding to a burial depth of 74 km.  相似文献   

A microgravity model for the city of İzmir (Western Anatolia) and its tectonic implementations     

Oya Pamukçu  Tolga Gönenç  Osman Uyanik  Hasan Sözbilir  Olcay Çakmak 《Acta Geophysica》2014,62(4):849-871

Western Anatolia has an extensional tectonic regime and the characteristics of the deformation in the continental crust observed in Aegean Region have a very complex structure. In our study area, the ?zmir city, Turkey, which is located within this active region, the general geological setting is also rather complex. This first microgravity study in ?zmir and its surroundings is related to the determination of active fault zones. It was conducted in the south of ?zmir, with the aim to investigate this complex structure in detail through microgravity data collected from six profiles throughout the survey area. The variation in Bouguer values was profoundly investigated along Profile P1 in N-S direction that was delineated to intersect all the tectonic elements. For this reason, Profile P1 was modeled in this study as 2D. As a result, the created gravity model was investigated together with geology, earthquake focal depths, and isostasy.  相似文献   

Application of an SMA-based hybrid control device to 20-story nonlinear benchmark building     

Osman E. Ozbulut  Stefan Hurlebaus 《地震工程与结构动力学》2012,41(13):1831-1843

This paper investigates the seismic response control of a 20-story nonlinear benchmark building with a new recentering variable friction device (RVFD). The RVFD combines energy dissipation capabilities of a variable friction damper (VFD) with the recentering ability of shape memory alloy (SMA) wires. The VFD that is the first subcomponent of the hybrid device consists of a friction generation unit and piezoelectric actuators. The clamping force of the VFD can be adjusted according to the current level of ground motion by adjusting the voltage level of piezoelectric actuators. SMA wires that exhibit a unique hysteretic behavior and full shape recovery after experiencing large strains is the second subcomponent of the hybrid device. Numerical simulations of a seismically excited 20-story benchmark building are conducted to evaluate the performance of the hybrid device. A continuous hysteretic model is used to capture frictional behavior of the VFD and a neuro-fuzzy model is employed to describe highly nonlinear behavior of the SMA components of the hybrid device. A fuzzy logic controller is developed to adjust the voltage level of VFDs for favorable performance in an RVFD hybrid application. Results show that the RVFD modulated with a fuzzy logic control strategy can effectively reduce interstory drifts and permanent deformations without increasing acceleration response of the benchmark building for most cases. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Special issue on water resources in arid areas     

Osman Abdalla  Mingjie Chen 《Arabian Journal of Geosciences》2017,10(1):6

  相似文献   

Correlation between Cerchar abrasivity index,rock properties,and drill bit lifetime     

Mehmet Capik  Ali Osman Yilmaz 《Arabian Journal of Geosciences》2017,10(1):15

The Cerchar abrasivity index (CAI) is one of the most widely known index method for identification of rock abrasivity. It is a simple and fast testing method providing reliable information on rock abrasiveness. In this study, the relationships between the CAI and some rock properties such as uniaxial compressive strength (UCS), point load strength, Brazilian tensile strength and Schmidt rebound hardness, and equivalent quartz content (EQC) are examined. The relationships between the CAI and drill bit lifetime is also investigated and the type of drill bit wear observed is mentioned. Additionally, the CAI is modeled using simple and multiple linear regression analysis based on the rock properties. Drill bit lifetime is also modeled based on the CAI. The results show that the CAI increases with the increase of the UCS, point load strength, Brazilian tensile strength, L-type and N-type Schmidt rebound hardness, and the EQC. It is concluded that the higher and the lower bit lifetime are obtained for marl and andesitic-basaltic formation, respectively. Moreover, flushing holes, inserted button, button removal, and failures of button on the bits are determined as the type of drill bit wear. The modeling results show that the models based on the UCS and the EQC give the better forecasting performances for the CAI.  相似文献