Petrophysical Properties of Natural Gas Hydrates-Bearing Sands and Their Sedimentology in the Nankai Trough     

Takashi Uchida  Takashi Tsuji 《Resource Geology》2004,54(1):79-87

Abstract. The Nankai Trough parallels the Japanese Island, where extensive BSRs have been interpreted from seismic reflection records. High resolution seismic surveys and drilling site-survey wells conducted by the MTI in 1997, 2001 and 2002 have revealed subsurface gas hydrate at a depth of about 290 mbsf (1235 mbsl) in the easternmost part of Nankai Trough. The MITI Nankai Trough wells were drilled in late 1999 and early 2000 to provide physical evidence for the existence of gas hydrate. During field operations, continuous LWD and wire-line well log data were obtained and numerous gas hydrate-bearing cores were recovered. Subsequence sedimentologic and geochemical analyses performed on the cores revealed important geologic controls on the formation and preservation of natural gas hydrate. This knowledge is crucial to predicting the location of other hydrate deposits and their eventual energy resource. Pore-space gas hydrates reside in sandy sediments from 205 to 268 mbsf mostly filling intergranular porosity. Pore waters chloride anomalies, core temperature depression and core observations on visible gas hydrates confirm the presence of pore-space hydrates within moderate to thick sand layers. Gas hydrate-bearing sandy strata typically were 10 cm to a meter thick. Gas hydrate saturations are typically between 60 and 90 % throughout most of the hydrate-dominant sand layers, which are estimated by well log analyses as well as pore water chloride anomalies.
It is necessary for evaluating subfurface fluid dlow behavious to know both porosity and permeability of gas hydrate-bearing sand to evaluate subsurface fluid flow behaviors. Sediment porosities and pore-size distributions were obtained by mercury porosimetry, which indicate that porosities of gas hydrate-bearing sandy strata are approximately 40 %. According to grain size distribution curves, gas hydrate is dominant in fine- to very fine-grained sandy strata.  相似文献   

Fracture-zone conditions on a recently active fault: insights from mineralogical and geochemical analyses of the Hirabayashi NIED drill core on the Nojima fault, southwest Japan, which ruptured in the 1995 Kobe earthquake     

Tatsuo Matsuda  Kentaro Omura  Ryuji Ikeda  Takashi Arai  Kenta Kobayashi  Koji Shimada  Hidemi Tanaka  Tomoaki Tomita  Satoshi Hirano   《Tectonophysics》2004,378(3-4):143

An 1800-m-deep borehole into the Nojima fault zone was drilled at Nojima-Hirabayashi, Japan, after the 1995 Hyogo-ken Nanbu (Kobe) earthquake. Three possible fracture zones were detected at depths of about 1140, 1300, and 1800 m. To assess these fracture zones in this recently active fault, we analyzed the distributions of fault rocks, minerals, and chemical elements in these zones. The central fault plane in the shallowest fracture zone was identified by foliated blue-gray gouge at a depth of 1140 m. The degree of fracturing was evidently greater in the hanging wall than in the footwall. Minerals detected in this zone were quartz, orthoclase, plagioclase, and biotite, as in the parent rock (granodiorite), and also kaolinite, smectite, laumontite, stilbite, calcite, ankerite, and siderite, which are related to hydrothermal alteration. Biotite was absent in both the hanging wall and footwall across the central fault plane, but it was absent over a greater distance from the central fault plane in the hanging wall than in the footwall. Major element compositions across this zone suggested that hydrothermal alteration minerals such as kaolinite and smectite occurred across the central fault plane for a greater distance in the hanging wall than in the footwall. Similarly, H₂O+ and CO₂ had higher concentrations in the hanging wall than in the footwall. This asymmetrical distribution pattern is probably due to the greater degree of wall–rock fracturing and associated alteration in the hanging wall. We attributed the characteristics of this zone to fault activity and fluid–rock interactions. We analyzed the other fracture zones along this fault in the same way. In the fracture zone at about 1300 m depth, we detected the same kinds of hydrothermal alteration minerals as in the shallower zone, but they were in fewer samples. We detected relatively little H₂O+ and CO₂, and little evidence for movement of the major chemical elements, indicating little past fluid–rock interaction. In the fracture zone at about 1800 m depth, H₂O+ and CO₂ were very enriched throughout the interval, as in the fracture zone at about 1140 m depth. However, smectite was absent and chlorite was present, indicating the occurrence of chloritization, which requires a temperature of more than 200 °C. Only smectite can form under the present conditions in these fracture zones. The chloritization probably occurred in the past when the fracture zone was deeper than it is now. These observations suggest that among the three fracture zones, that at about 1140 m depth was the most activated at the time of the 1995 Hyogo-ken Nanbu (Kobe) earthquake.  相似文献   

Configuration of subducting Philippine Sea plate and crustal structure in the central Japan region     

Takashi Iidaka  Tetsuya Takeda  Eiji Kurashimo  Tomonori Kawamura  Yoshiyuki Kaneda  Takaya Iwasaki 《Tectonophysics》2004,388(1-4):7

A seismic experiment with six explosive sources and 391 seismic stations was conducted in August 2001 in the central Japan region. The crustal velocity structure for the central part of Japan and configuration of the subducting Philippine Sea plate were revealed. A large lateral variation of the thickness of the sedimentary layer was observed, and the P-wave velocity values below the sedimentary layer obtained were 5.3–5.8 km/s. P-wave velocity values for the lower part of upper crust and lower crust were estimated to be 6.0–6.4 and 6.6–6.8 km/s, respectively. The reflected wave from the upper boundary of the subducting Philippine Sea plate was observed on the record sections of several shots. The configuration of the subducting Philippine Sea slab was revealed for depths of 20–35 km. The dip angle of the Philippine Sea plate was estimated to be 26° for a depth range of about 20–26 km. Below this depth, the upper boundary of the subducting Philippine Sea plate is distorted over a depth range of 26–33 km. A large variation of the reflected-wave amplitude with depth along the subducting plate was observed. At a depth of about 20–26 km, the amplitude of the reflected wave is not large, and is explained by the reflected wave at the upper boundary of the subducting oceanic crust. However, the reflected wave from reflection points deeper than 26 km showed a large amplitude that cannot be explained by several reliable velocity models. Some unique seismic structures have to be considered to explain the observed data. Such unique structures will provide important information to know the mechanism of inter-plate earthquakes.  相似文献   

A Test of Mining Simulations for Phosphorus Adjustment in a Limestone Quarry - Dynamic Programming Compared with a Genetic Algorithm     

Ito  Toshihide  Nishiyama  Takashi 《Natural Resources Research》2003,12(3):223-228

Limestone quarries where slaked lime is produced for steel makers have been urged to reduce the concentration of phosphorus in their products. In a few quarries in Japan, limestone blocks with low concentrations are blended with limestone blocks with high concentrations to stay below the limit of permitted phosphorus quality. The life of the quarry is extended as long as possible by this blending. Some quarries have a geological database with accurate records of the operations for phosphorus adjustment.However, the combination problem of these blocks typically is addressed by Dynamic Programming; that is, all combinations of possible limestone blocks are examined in the solving process; the combination numbers are so huge that the optimum combination cannot be solved in practical process times. Although it took 8 hours to solve for 600 blocks with a 2GHz high performance personal computer, it would take more than 36 days to approximately solve for 1200 blocks, and 3,378 days are estimated to solve 2,400 blocks. Therefore, a Genetic Algorithm was used to try and work out the optimum combination. First, blocks that can be removed are selected in the quarry and their removal sequence makes the genotype. The Order-base or the Grefenstette method was applied to avoid generating lethal genes in crossover. The fitness value was estimated by the number of products that included less than the permitted concentration of phosphorus.The GA process took less than 3 hours to solve for 1,200 blocks. Because the processing time is almost proportional to the block numbers, this GA method is practical in large quarries. Moreover, this method is easy to apply to other conditions in mining plans, such as environmental protection, noise prevention and eyesore problems. These problems are becoming important factors in quarries near towns in Japan.  相似文献   

Soft X-Ray and White-Light Coronal Observations of the Post-Flare Arch on 2 November 1991     

Watari  Shinichi  Watanabe  Takashi 《Solar physics》1998,180(1-2):427-438

A giant post-flare arch observed on 2-3 November 1991 was analyzed using the soft X-ray telescope (SXT) on board Yohkoh and the Mark III (MK3) K-coronameter at the High Altitude Observatory/Mauna Loa Solar Observatory. The rising arch was observed in both soft X-ray and K-corona observations. The estimated rising speed from the MK3 observation was approximately 4 km s^-1. A V-shaped depression area was observed on the south side of the giant arch. Change in the K-corona observations was faint while the arch was rising. According to the solar wind observations by the Pioneer Venus Orbiter and the Interplanetary Cometary Explorer, this giant arch event may have been associated with an interplanetary shock.  相似文献   

Lateral structural variation across a collision zone in central Hokkaido, Japan, as revealed by wide-angle seismic experiments     

Takaya Iwasaki  Oguz Ozel  Takeo Moriya  Shin'ichi Sakai  Sadaomi Suzuki  Gen Aoki  Takuya Maeda†  & Takashi Iidaka 《Geophysical Journal International》1998,132(2):435-457

  相似文献   

The evolution of Pinatubo aerosols in the Arctic stratosphere during 1994–2000     

Masaharu Watanabe  Yasunobu Iwasaka  Takashi Shibata  Masahiko Hayashi  Motowo Fujiwara  Roland Neuber   《Atmospheric Research》2004,69(3-4):199-215

Balloon-borne aerosol measurements were performed with an optical particle counter between 1994 and 2000 at Ny-Ålesund (79°N), Svarbard. Throughout the observation period, continuous decay was found in the concentrations of particles with 0.4–0.6 μm in radius in the Arctic stratosphere, suggesting that Pinatubo aerosols remained even at the end of the 1990s. The decay rate was clearly higher for larger particle sizes, and higher at higher altitude (e-folding time of 970–526 days), suggesting a gravitational sedimentation effect. For smaller particles with R<0.4 μm, slight increases in concentration with time were found, which agreed with the measurements at mid-latitude. The sulfate mass mixing ratio in the Arctic stratosphere before 1998 showed values higher than those at middle latitude, while values were almost the same in both regions after 1998. A possible explanation of the latitudinal difference is a time lag (of 0.5–1 year) in the arrival of Pinatubo aerosols in the Arctic.  相似文献   

The examination of fracturing process subjected to triaxial compression test in Inada granite   总被引：1，自引：0，他引：1  

Takashi Nishiyama  Youqing Chen  Hiromu Kusuda  Toshihide Ito  Katsuhiko Kaneko  Haruyuki Kita  Toshinori Sato 《Engineering Geology》2002,66(3-4):257-269

The behavior of a granite subject to a triaxial compression test ranging from the prefailure stage to the postfailure stage was studied using a fluorescent technique from the geological point of view. Microscopic observations of the specimens at different stages showed changes in the failure process. The start of formation of new microcracks paralleled the compression direction through their propagation until the onset of faulting and ended with the failure of shear zones after the strength failure point. Pores chiefly identified in the feldspar increased in length and width in the early stages, but not in number. It seems that the effect of pore spaces did not have any effect of failure. The microcracks generated on angular edges of quartz or feldspar grains and around biotite grains with increasing compression force. The phenomenon appearing on the crystal boundaries among biotite and quartz or feldspar agrees with the result calculated based on the theory on stress fields with ellipsoidal inhomogeneity suggested by Eshelby.  相似文献   

Trace elements in skin of Dall's porpoises (Phocoenoides dalli) from the northern waters of Japan: an evaluation for utilization as non-lethal tracers     

Jian Yang  Takashi Kunito  Shinsuke Tanabe  Masao Amano  Nobuyuki Miyazaki 《Marine pollution bulletin》2002,45(1-12)

Concentrations of Fe, Zn, Cu, Se, Mn, Mo, Hg, Cd, Cr, Ag, Pb, Sr and V were determined in skins of Dall's porpoises (Phocoenoides dalli) of the Pacific coast truei-type population (PT population) (N=45), and the Sea of Japan-Okhotsk dalli-type population (JD population) (N=31) from the northern waters of Japan. Cutaneous Hg concentrations in both PT and JD populations were significantly correlated with age, indicating a possible alternative method of age estimation. A significant correlation was also noted between Hg concentrations in skin and liver, suggesting that biopsy samples of skin can provide a non-lethal surrogate for monitoring Hg contamination in this species. Trace element accumulation patterns differed strongly between PT and JD populations, when analyzed by principal component analysis, suggesting these patterns could be utilized as non-lethal tracers of population identification.  相似文献   

Study on the compositional dependence of the apparent partition coefficient of iron and magnesium between coexisting garnet and clinopyroxene solid solution     

Yasutami Oka  Takashi Matsumoto 《Contributions to Mineralogy and Petrology》1974,48(2):115-121

Compositional dependence of apparent partition coefficient of iron and magnesium between coexisting garnet and clinopyroxene from Mt. Higasiakaisi is studied by means of a multicomponent regular solution model. It is shown that garnet and clinopyroxene solid solutions are positively non-ideal, and the non-ideal parameters according to the symmetric regular solution model are 2.58 kcal and 2.39 kcal, respectively, assuming the equilibration temperature of the mass to be 550° C.Notations a _i ^h activity of component i in phase h - _ij interaction parameter of component i and j in a solid solution - _i activity coefficient of component i - X _i mole fraction of component i - K partition coefficient of Fe and Mg between coexisting garnet and clinopyroxene - K apparent partition coefficient of Fe and Mg between coexisting garnet and clinopyroxene - G ⁰ difference in free energy of the partition reaction - H ⁰ difference in enthalpy of the partition reaction - S ⁰ difference in entropy of the partition reaction - R gas constant - G garnet - Alm almandine component - Py pyrope component - Gr grossular component - Sp spessartine component - CPx clinopyroxene - Hd hedenbergite component - Di diopside component - Jd jadeite component - Ts Tschermac's molecule component Deceased on April 17, 1974.  相似文献