A preliminary analysis of arcuate structures-relationship of the island arc and deep-sea trench to the dip angle of Benioff zone     

Wu Lun  Liang Haihu  Ren Fuhu  Li Maosong 《海洋学报(英文版)》1989,8(1):125-136

The origin of arcuate islands and deep-sea trenches has been studied for a long time and various interpretations have been proposed. In this paper, some analytical models are put forward from a geometrical viewpoint and then the theoretical dip angles of the underthrusting slabs of circum-Pacific island arcs are computed and compared with those of the Benioff zone. As a result, it is found that the dip angle of the underthrusting slab is one of the main factors determining the curvature of the arcuate structure. The authors consider that this result may contribute to the plate theory.  相似文献   

低硼氢氧化镁的制备及热分解动力学参数     

高荣杰  冯丽娟  杜敏  宁滨  梁丽 《中国海洋大学学报(自然科学版)》2002,32(5):789-794

本文以水合氯化镁、工业氨水为原料制备出了低硼含量的纯度 >99%的氢氧化镁和氧化镁。利用差热 -热重 (DTA- TG)、X-射线衍射 (XRD)、透射电子显微镜 (TEM)等手段 ,对氢氧化镁的热稳定性、相结构、表观状态以及脱水动力学参数进行了分析。结果为 :氢氧化镁以束状纤维和片状粉末共存 ,在 6 2 3K基本完成脱水反应生成氧化镁 ,其脱水反应的表观活化能 E为135 .4 k J· mol-1,指前因子 A为 5 .15× 10 10 ,反应级数 n为 1.10  相似文献   

国外渔具选择性研究进展   总被引：2，自引：1，他引：2  

梁振林  葛长字  刘英光 《中国海洋大学学报(自然科学版)》2001,31(6):835-841

为了保护和可持续利用渔业资源 ,渔具选择性的研究在国际上倍受重视。该文以比较作业法中渔具选择性曲线的推导 ,特别是利用扩张 SEL ECT模型推导渔具选择性曲线为例 ,介绍国外渔具选择性研究的最新进展 ,以期作为我国开展这方面研究工作的参考  相似文献   

江苏岸外辐射沙脊群东沙稳定性研究   总被引：8，自引：0，他引：8  

陈君  王义刚  张忍顺  林祥 《海洋工程》2007,25(1):105-113

东沙是江苏岸外辐射沙脊群中的第二大沙洲,具有独特的地形地貌和水动力条件,对它进行稳定性研究为揭示整个辐射沙洲及其邻近岸滩的动态演变都非常有益。通过利用多年遥感卫片资料、1998年取得的现场水文泥沙观测资料和东沙滩面表层沉积物资料等,对东沙的地形地貌特征、沉积特征和东沙两侧潮汐通道的水流泥沙特征等进行了详细分析。研究结果表明,东沙的沙脊偏于西侧,西侧滩面较窄、高程较高且岸线较为顺直,东侧滩面较宽、高程较低且岸线较为破碎;西洋和陈家坞槽均处于冲刷状态,净输沙的主要方向为输向槽外或输向条子泥;东沙近三十年来面积有所缩小且有外围向中央收缩的趋势,尤其以向东、向南方向的迁移最为明显。  相似文献   

Analysis of Offshore Oil Pipeline Floating Laying     

Liang Zheng Lecture  Southwest Petroleum Institute  Nanchong  Sichun Province 《中国海洋工程》1994,(1)

-Based on the calculation model for the floating laying of the offshore oil pipeline, this paper analyses in detail the internal force, and deformation of the pipeline under a definite structural form (pipeline and buoy) and the way of pulling. The obtained results can be used for the buoy deployment, structure design, and the determination of pulling parameters (the pulling force of the cable and its length, etc.), providing an effective analysis method for floating pipeline-laying. A calculation example is given to show the related calculation process and the main results are analyzed and discussed.  相似文献   

茶皂素对几种鱼类和对虾的毒性研究   总被引：7，自引：0，他引：7  

梁亚全  夏春华  朱全芬  孙修涛  唐丽萍 《海洋科学》1992,16(3):20-25

本研究以茶皂素类作为“清池剂”,试图解决对虾养殖的基础和应用技术问题。试验结果表明:对虾对茶皂素和油茶皂素有较高的耐受力;茶皂素与油茶皂素均具鱼毒活性,油茶皂素则较强。鱼种不同,中毒反应也略有差异;两种茶皂素的鱼毒速度快,在致死浓度时16h内出现中毒死亡,毒性降解也快,浓度为5×10~(-6)时40h后不再引起鱼类中毒。  相似文献   

海洋细菌抑菌活性菌株的筛选   总被引：16，自引：2，他引：16  

骆祝华  黄翔玲  王琳  裴耀文  叶德赞 《台湾海峡》2002,21(2):181-186

从不同海区的海洋底质，生物样，水样中分离到480株海洋细菌，其中包括150株芽孢细菌和108株粪大肠杆菌，利用纸片法对其抑菌活性进行检测，结果表明：117株海洋细菌具有抑菌活性，占总分离菌株的24.4%；一般细菌，芽孢细菌，粪大肠杆菌的抑菌活性菌株分别占各供测菌株的17.1%,27.3%,35.2%；抑菌活性菌株的比例与样品来源密切相关，且各类海洋细菌的抗菌谱有很大的不同。  相似文献   

涠洲岛珊瑚礁生态系中浮游动植物与环境因子关系的初步探讨   总被引：2，自引：0，他引：2  

韦蔓新  黎广钊  何本茂  梁文 《海洋湖沼通报》2005,(2):34-39

本文根据1990年4月、10月间的理化分析数据，结合2002年9月涠洲岛珊瑚礁生态环境的调查状况，首次从珊瑚礁生态系的角度初步探讨该岛区浮游动植物与环境因子的关系。结果表明：该岛区浮游动植物的分布具有明显的区域性和季节性，既体现了珊瑚礁生态系具有较高的初级生产力特征，也体现了浮游动植物具有显著的季节交替现象。相关分析显示，水温、盐度、N，P，Si营养盐对浮游植物的种类组成及数量变动均有明显影响，但对浮游动物的影响不大；N是该生态系中浮游植物的限制因子，P限制状况只有在珊瑚礁生长带较深的海域出现，Si呈相对富足状态。  相似文献   

Study on “J”Type Offshore Pipeline-Laying Method     

Liang Zheng Associate Professor  Southwest petroleum Institute  Nanchong  Sichuan Province 《中国海洋工程》1994,(2)

-Considering both the seabed foundation and wave, an analytic model of "J" type is proposed for offshore pipeline-laying. The governing differential equation is also obtained for the pipeline on the seabed and for the suspension sections. By utilizing weighted- residual method and dual iteration technique, an approximate solution is obtained, too. In the end, calculation examples are given for analyzing the changeable relationship among the major parameters.  相似文献   

Optimum design of filament-wound multilayer-sandwich submersible pressure hulls     

Cho-Chung Liang  Hung-Wen Chen  Chan-Yung Jen 《Ocean Engineering》2003,30(15):1941-1967

Submersible pressure hulls with fiber-reinforced multilayer-sandwich constructions have been developed in recent years as substitutes for classical metallic ring-stiffened pressure hulls. This study aims to optimize the design of filament-wound multilayer-sandwich submersible pressure hulls, taking into consideration the shell buckling strength constraint, the angle-ply laminated facing failure strength constraint and the low-density isotropic core yielding strength constraint under hydrostatic pressure using the hybrid genetic algorithm (HGA). The thickness of the facing, the thickness of the core layer, the orientation angle of the fibers in the facings and the shear modulus of the core material are taken as design variables. A sensitivity analysis is performed to study the effects of the operational depths and the hull shell geometry parameter, the length-to-diameter ratio (L/D), on the optimal design of filament-wound multilayer-sandwich submersible pressure hulls with graphite/epoxy, glass/epoxy and boron/epoxy composite facings. The results reveal that the optimal weight of various sandwich pressure hulls increases linearly with the operational depth, but it is almost unchanged as the geometry paramter. Furthermore, Graphite/Epoxy is the best choice for the material of the facings in a light-weight design. With reference to wall design, Boron/Epoxy is the best choice for the material of the facing at shallow depths, but Graphite/Epoxy is the best choice at extreme depths. Results of this study provide a valuable reference for designers of underwater vehicles.  相似文献