On-going orogeny in the outer-arc of the Timor–Tanimbar region, eastern Indonesia     

Yoshiyuki Kaneko  Shigenori Maruyama  Ade Kadarusman  Tsutomu Ota  Masahiro Ishikawa  Tatsuki Tsujimori  Akira Ishikawa  Kazuaki Okamoto   《Gondwana Research》2007,11(1-2):218

The Timor–Tanimbar islands of eastern Indonesia form a non-volcanic arc in front of a 7 km deep fore-arc basin that separates it from a volcanic inner arc. The Timor–Tanimbar Islands expose one of the youngest high P/T metamorphic belts in the world, providing us with an excellent opportunity to study the inception of orogenic processes, undisturbed by later tectonic events.Structural and petrological studies of the high P/T metamorphic belt show that both deformation and metamorphic grade increase towards the centre of the 1 km thick crystalline belt. Kinematic indicators exhibit top-to-the-north sense of shear along the subhorizontal upper boundaries and top-to-the-south sense in the bottom boundaries of the high P/T metamorphic belt. Overall configuration suggests that the high P/T metamorphic rocks extruded as a thin sheet into a space between overlying ophiolites and underlying continental shelf sediments. Petrological study further illustrates that the central crystalline unit underwent a Barrovian-type overprint of the original high P/T metamorphic assemblages during wedge extrusion, and the metamorphic grade ranged from pumpellyite-actinolite to upper amphibolite facies.Quaternary uplift, marked by elevation of recent reefs, was estimated to be about 1260 m in Timor in the west and decreases toward Tanimbar in the east. In contrast, radiometric ages for the high P/T metamorphic rocks suggest that the exhumation of the high P/T metamorphic belt started in western Timor in Late Miocene time and migrated toward the east. Thus, the tectonic evolution of this region is diachronous and youngs to the east. We conclude that the deep-seated high P/T metamorphic belt extrudes into shallow crustal levels as a first step, followed by doming at a later stage. The so-called ‘mountain building’ process is restricted to the second stage. We attribute this Quaternary rapid uplift to rebound of the subducting Australian continental crust beneath Timor after it achieved positive buoyancy, due to break-off of the oceanic slab fringing the continental crust. In contrast, Tanimbar in the east has not yet been affected by later doming. A wide spectrum of processes, starting from extrusion of the high P/T metamorphic rocks and ending with the later doming due to slab break-off, can be observed in the Timor–Tanimbar region.  相似文献   

Current Nature of the Kuroshio in the Vicinity of the Kii Peninsula   总被引：1，自引：0，他引：1  

Yutaka Nagata  Junichi Takeuchi  Makoto Uchida  Isamu Ishikura  Yoshitaka Morikawa  Takashi Koike 《Journal of Oceanography》1999,55(3):407-416

The Kuroshio flows very close to Cape Shionomisaki when it takes a straight path. The detailed observations of the Kuroshio were made both on board the R/V Seisui-maru of Mie University and on board the R/V Wakayama of the Wakayama Prefectural Fisheries Experimental Station on June 11–14, 1996. It was confirmed that the current zone of the Kuroshio touches the coast and bottom slope just off Cape Shionomiaki, and that the coastal water to the east of the cape was completely separated from that to the west. The relatively high sea level difference between Kushimoto and Uragami could be caused by this separation of the coastal waters when the Kuroshio takes a straight path. This flow is rather curious, as the geostrophic flow, which has a barotropic nature and touches the bottom, would be constrained to follow bottom contours due to the vorticity conservation law. The reason why the Kuroshio leaves the bottom slope to the east of Cape Shionomisaki is attributed to the high curvature of the bottom contours there: if the current were to follow the contours, the centrifugal term in the equation of motion would become large and comparablee to the Coriolis (or pressure gradient) term, and the geostrophic balance would be destroyed. This creates a current-shadow zone just to the east of the cape. As the reason why the current zone of the Kuroshio intrudes into the coastal region to the west of the cape, it is suggested that the Kii Bifurcation Current off the southwest coast of the Kii Peninsula, which is usually found when the Kuroshio takes the straight path, has the effect of drawing the Kuroshio water into the coastal region. The sea level difference between Kushimoto and Uragami is often used to monitor the flow pattern of the Kuroshio near the Kii Peninsula. It should be noted that Uragami is located in the current shadow zone, while Kushimoto lies in the region where the offshore Kuroshio water intrudes into the coastal region. The resulting large sea level difference indicates that the Kuroshio is flowing along the straight path.  相似文献   

Petrography of Late Cambrian to Middle Ordovician radiolarian chert in Kazakhstan with special reference to the emergence of benthic animals in the pelagic realm     

Yoshitaka Kakuwa  Olga I. Nikitina 《Sedimentology》2020,67(5):2764-2776

Upper Cambrian to Middle Ordovician radiolarian chert successions from Kazakhstan were studied to clarify the history of the emergence of benthic animals in ocean floor sediments. Radiolarian tests and clay were deposited for a period of 30 Myr without experiencing an influx of continent-derived coarse clastic materials. Red, grey and black cherts of the Upper Cambrian to the upper mid-Darriwilian are thinly laminated, and no trace of benthic animal activity is recognized in that time interval. Bioturbation structures and burrow traces in mid-Darriwilian stage red chert in Kazakhstan suggest that benthic animals colonized the location where radiolarian chert formed, but that there was a significant delay in colonization when compared with similar reported occurrences in Australia and Canada.  相似文献   

Bidirectional shaking table tests of a low-cost friction sliding system with flat-inclined surfaces     

Miguel B. Brito  Mitsuyoshi Akiyama  Yoshitaka Ichikawa  Hiroki Yamaguchi  Riki Honda  Naomitsu Ishigaki 《地震工程与结构动力学》2020,49(8):817-837

A novel low-cost friction sliding system for bidirectional excitation is developed to improve the seismic performance of reinforced concrete (RC) bridge piers. The sliding system is a spherical prototype developed by combining a central flat surface with an inclined spherical segment, characterized by stable oscillation and a large reduction in response accelerations on the flat surface. The inclined part provides a restoring force that limits the residual displacements of the system. Conventional steel and concrete are employed to construct a flat-inclined spherical surface atop an RC pier. The seismic forces are dissipated through the frictions generated during the sliding movements; hence, the seismic resilience of bridges can be ensured with a low-cost design solution. The proposed system is fabricated utilizing a mold created by a three-dimensional printer, which facilitates the use of conventional concrete to construct spherical shapes. The concrete surface is lubricated with a resin material to prevent abrasion from multiple input ground motions. To demonstrate the effectiveness of the system, bidirectional shaking table tests are conducted in the longitudinal and transverse directions of a scaled bridge model. The effect of the inclination angle and the flat surface size is investigated. The results demonstrate a large decrease in response acceleration when the system exhibits circular sliding displacement. Furthermore, the inclination angle that generates the smallest residual displacement is identified experimentally.  相似文献   

Internal differentiation of Kutsugata lava flow from Rishiri Volcano,Japan: Processes and timescales of segregation structures' formation     

Takeshi Kuritani  Takeyoshi Yoshida  Yoshitaka Nagahashi 《Journal of Volcanology and Geothermal Research》2010

Internal differentiation processes in a solidifying lava flow were investigated for the Kutsugata lava flow from Rishiri Volcano in northern Japan. In a representative 6-m thick lava flow that was investigated in detail in this study, segregation products darker than the host lavas manifested mainly in the form of pipes (vesicle cylinders) and layers (vesicle sheets), occurring around 0.5–2.3 m and 2.0–4.0 m above the base, respectively. Both the cylinders and sheets are significantly richer in incompatible elements such as TiO₂ and K₂O than the host lavas, which suggest that these products essentially represent residual melt produced during solidification of the lava flow. Field observation and the geochemical features of the lavas suggest that the vesicle cylinders grew upward from near the base of the flow by continuous feeding of residual melt from the neighboring host lavas to the heads of the cylinders. On the other hand, the vesicle sheets were produced in situ in the solidifying lava flow as fracture veins caused by horizontal compression. The vesicle cylinders have a remarkably higher MgO content (up to 8 wt.%) than the host lava (< 6 wt.%), whereas the vesicle sheets display MgO depletion (as low as 3.5 wt.%). The relatively high MgO content of the vesicle cylinders cannot be explained solely by the mechanical mixing of olivine phenocrysts with the residual melt. It is suggested that the vesicle cylinders were produced by the extraction of olivine-bearing interstitial melt from an augite-plagioclase network in the host lava, whereas the vesicle sheets were formed by the migration of the residual melt from a crystal network consisting of plagioclase, augite, and olivine in the host lava into platy fractures. We infer that this selective crystal fractionation for forming the vesicle cylinders resulted from processes in which abundant vesicles rejected from the upward-migrating floor solidification front prevented olivine crystals from being incorporated into the crystal network in the host lava. The vesicle cylinders are considered to have formed in ∼ 1 day after the lava flow came to rest, while relatively large vesicle sheets (> 1 cm thick) appeared much later (after ∼ 9 days). The formation of these segregation products was essentially complete within 20 days after the lava emplacement.  相似文献   

Intra-oceanic island arc origin for Iratsu eclogites of the Sanbagawa belt,central Shikoku,southwest Japan     

Atsushi Utsunomiya  Bor-ming Jahn  Kazuaki Okamoto  Tsutomu Ota  Hironao Shinjoe 《Chemical Geology》2011,280(1-2):97-114

New geochemical and Sr–Nd isotopic data for the Iratsu eclogite and surrounding metamorphic rocks of the Sanbagawa belt, Japan, show that, while the protoliths of the metamorphic rocks formed in a variety of tectonic settings, the Iratsu body represents a deeply subducted and accreted island arc. The igneous protoliths of eclogites and garnet amphibolites were probably generated from a mantle source that had components of both a depleted mantle modified by slab-released fluid (as seen in a negative Nb anomaly) and an enriched mantle, similar to that of ocean island basalts (OIB). Fractional crystallization modeling indicates that the protoliths of some garnet clinopyroxenites from the Iratsu body are cumulates from a basaltic magma that crystallized under high O₂ and H₂O fugacities in the middle to lower crust. The source characteristics and crystallization conditions suggest that the protoliths of the Iratsu rocks formed in an oceanic island arc. Quartz eclogites from the marginal zone of the Iratsu body have geochemical signatures similar to turbidites from the Izu–Bonin island arc (as seen in a negative Nb anomaly and a concave REE pattern). The protoliths might be volcaniclastic turbidites that formed in a setting proximal to the oceanic island arc. Geochemical and isotopic signatures of the surrounding mafic schists are similar to normal (N-) and enriched (E-) mid-ocean-ridge basalt (MORB), and distinct from the rocks from the Iratsu body. The protoliths of the mafic schists likely formed in a plume-influenced mid-ocean ridge or back-arc basin. Pelitic schists from the surrounding rocks and pelitic gneisses from the marginal zone of the Iratsu body have evolved, continental geochemical signatures (as seen in a negative ε_Nd(t) value (~?5)), consistent with their origin as continent-derived trench-fill turbidites.  相似文献   

Thermobaric structure of the Kokchetav ultrahigh-pressure–high-pressure massif deduced from a north–south transect in the Kulet and Saldat–Kol regions, northern Kazakhstan     

Tsutomu Ota  Masaru Terabayashi  Christopher D. Parkinson and  Hideki Masago 《Island Arc》2000,9(3):328-357

Abstract To investigate the regional thermobaric structure of the diamondiferous Kokchetav ultrahigh‐pressure and high‐pressure (UHP–HP) massif and adjacent units, eclogite and other metabasites in the Kulet and Saldat–Kol regions, northern Kazakhstan, were examined. The UHP–HP massif is subdivided into four units, bounded by subhorizontal faults. Unit I is situated at the lowest level of the massif and consists of garnet–amphibolite and acidic gneiss with minor pelitic schist and orthogneiss. Unit II, which structurally overlies Unit I, is composed mainly of pelitic schist and gneiss, and whiteschist locally with abundant eclogite blocks. The primary minerals observed in Kulet and Saldat–Kol eclogites are omphacite, sodic augite, garnet, quartz, rutile and minor barroisite, hornblende, zoisite, clinozoisite and phengite. Rare kyanite occurs as inclusions in garnet. Coesite inclusions occur in garnet porphyroblasts in whiteschist from Kulet, which are closely associated with eclogite masses. Unit III consists of alternating orthogneiss and amphibolite with local eclogite masses. The structurally highest unit, Unit IV, is composed of quartzitic schist with minor pelitic, calcareous, and basic schist intercalations. Mineral assemblages and compositions, and occurrences of polymorphs of SiO₂ (quartz or coesite) in metabasites and associated rocks in the Kulet and Saldat–Kol regions indicate that the metamorphic grades correspond to epidote–amphibolite, through high‐pressure amphibolite and quartz–eclogite, to coesite–eclogite facies conditions. Based on estimations by several geothermobarometers, eclogite from Unit II yielded the highest peak pressure and temperature conditions in the UHP–HP massif, with metamorphic pressure and temperature decreasing towards the upper and lower structural units. The observed thermobaric structure is subhorizontal. The UHP–HP massif is overlain by a weakly metamorphosed unit to the north and is underlain by the low‐pressure Daulet Suite to the south; boundaries are subhorizontal faults. There is a distinct pressure gap across these boundaries. These suggest that the highest grade unit, Unit II, has been selectively extruded from the greatest depths within the UHP–HP unit during the exhumation process, and that all of the UHP–HP unit has been tectonically intruded and juxtaposed into the adjacent lower grade units at shallower depths of about 10 km.  相似文献   

Reply to the Comments of Kato and Isozaki on “Evaluation of palaeo-oxygenation of the ocean bottom across the Permian–Triassic boundary” by Y. Kakuwa [Global Planet. Change 63 (2008) 40–56]: Was the Late Permian deep-superocean really oxic?     

Yoshitaka Kakuwa   《Global and Planetary Change》2009,69(1-2):82-86

  相似文献   

Source parameters of some presumed Semipalatinsk underground nuclear explosions     

Ota Kulhánek 《Pure and Applied Geophysics》1973,102(1):51-66

Summary Short-period vertical-componentP-wave spectra of seven presumed Semipalatinsk underground nuclear explosions, recorded by the Swedish seismic station network, are investigated. The events considered have closely spaced foci and cover the magnitude range fromm _b=5.5 tom _b=6.6. Spectra of six of these explosions show pronounced minima, varying from about 1.5 to 1.8 cps, which could be explained as principle minima due toP-pP interference. Supposing a nearsurfaceP-wave velocity at the test area of 4 km/sec, the shot depths are estimated to vary roughly from 750 to 1350 m. In order to obtain an estimate of the yield, the observed spectra are compared withHaskell's theoretical source spectra. For four events, relative yield estimates fit well the predicted values for explosions fired in a granitic medium. The behaviour of the remaining three explosions is discussed in detail.  相似文献   

P-wave amplitude spectra of Nevada underground nuclear explosions     

Ota Kulhánek 《Pure and Applied Geophysics》1971,88(1):121-136

Summary Short-period vertical-componentP-wave spectra have been determined for twelve Nevada underground nuclear explosions recorded by the Swedish seismic station network. Selected events cover the magnitude range fromm _b =5.9 tom _b =7.0 and the shot-depth range from 460 m to 1400 m. All explosion spectra show pronounced minima near 1 sec period. Within individual test areas the period at which the minimum occurs increases systematically with increasing shot-depth. This dependence makes it possible to interpret the observed minima in terms of interference betweenP- andpP-waves. One atmospheric explosion from Novaya Zemlya is analyzed to verify the inferred minima intrpretation.The minimum-period shows also a systematic linear dependence upon the magnitude. However, the physical explanation for this dependence is not evident and it may just be a consequence of a magnitude-depth relation.On leave from the Geophysical Institute, Czechosl. Acad. Sci., Prague 4-Spoilov, Boni II.  相似文献