井下地震计的P波接收函数正演计算及其稳定性研究——以首都圈地区为例          下载免费PDF全文

郑德高  倪四道  杨卓欣  刘志 《地球物理学报》2018,61(10):3964-3979

井下地震计波形记录的P波垂向分量存在频谱极小（spectrum null）现象,导致接收函数的结果不稳定.本文以首都圈地区为例,基于平面波入射的传播矩阵理论,发展了用于计算井下地震计的接收函数正演方法.在此基础上,分析了井下地震计波形垂向分量频谱极小现象,研究其对接收函数稳定性的影响.结果表明,井下地震计波形记录垂向分量的频谱极小开始出现的频率和地震计的埋深相关.该现象可造成反卷积提取的接收函数不稳定,且不稳定情况出现在频谱极小附近的频段,可通过选择合适的高斯因子压制其对接收函数的影响.  相似文献   

常Q滞弹性介质地震波动数值模拟——时域本构优化逼近          下载免费PDF全文

谢志南  郑永路  章旭斌 《地球物理学报》2018,61(10):4007-4020

在地震波动模拟中计入常Q滞弹性阻尼,可有效降低模拟波形的误差.就时域有限差分和有限元模拟而言,常基于广义标准线性体建立阻尼介质的时域本构逼近.广义标准线性体由若干标准线性体并联得到,增加标准线性体个数能有效提高模拟精度,但计算量及计算存储将成倍增长.目前尚未有普适的标准线性体个数优化取值方案.本文基于广义标准线性体参数的非线性优化拟合方法,详细分析了时域本构逼近误差的影响因素,清楚揭示了逼近误差仅取决于频带宽度,与频带上下限取值无关这一特性,阐明了构建具有普适性标准线性体个数优化取值方案的可行性.论证了波形模拟精度主要取决于波传播距离与模拟波长的比值以及标准线性体的个数取值.综合考虑上述两个控制因素,结合在波动正反演问题中广为采纳的波形时频误差衡量准则,对不同Q值介质给出了标准线性体个数优化取值表.进一步,本文提出采用不同个数标准线性体以近似不同Q值的阻尼介质时域本构,解决了以往波动数值模拟中统一采用相同个数标准线性体而导致的计算量及计算存储浪费或模拟精度低下等问题,并基于数值实验验证了这一方法的精度.本文工作对推进滞弹性介质波动数值模拟及其在全波形反演问题中的应用具有理论价值和实践意义.  相似文献   

中华蛸寄生丛集球虫(顶复亚门:丛集球虫科)新种的形态学与分子生物学研究     

任静  何卫彤  王丽华  唐艳  郑小东 《海洋与湖沼》2021,52(5):1323-1331

丛集球虫(顶复亚门:类锥体纲:丛集球虫科)是头足类消化道中一类常见寄生虫,在福建连江海域以及浙江南麂岛周边海域采捕到的中华蛸(Octopussinensis)盲囊及肠组织内发现一丛集球虫新种,命名为多刺丛集球虫Aggregata octaculeata sp. nov.。光学显微镜和扫描电镜下观察发现,中华蛸体内的多刺丛集球虫存在配子生殖阶段和孢子生殖阶段,其中,孢子生殖阶段成熟卵囊呈近球形或椭球形,长径653.6—806.5μm,短径588.1—787.1μm。孢子囊为卵球形或椭球形,长径22.4—26.1μm,短径20.5—24.6μm,孢子囊壁为双层,外部光滑,内层多刺。孢子囊内子孢子呈卷曲状,数目范围8—13个,子孢子长度为22.2—28.6μm,宽度为3.0—5.0μm。基于18SrRNA基因构建的系统发育树进一步证实该物种隶属于丛集球虫属,并高度支持了属内[(中华丛集球虫A. sinensis+A. octopiana)+A. eberthi]+多刺丛集球虫A. octaculeata的系统发生关系。  相似文献   

几种不同矩阵算法的遥感图像几何精纠正效果比较     

黄世存  章文毅  何国金  郑婉勤  吴海平 《国土资源遥感》2005,16(3):18-22

分别采用Gauss、Householder及Givens三种变换形式进行遥感图像几何精纠正试验，并将试验结果与商业遥感软件PCI的纠正结果进行比较。结果表明，Givens算法在一至五次多项式纠正中，其总体精度优于其它算法。  相似文献   

PRESENT KINEMATICS CHARACTERISTICS OF THE NORTHERN YUMUSHAN ACTIVE FAULT AND ITS RESPONSE TO THE NORTHEASTWARD GROWTH OF THE TIBETAN PLATEAU          下载免费PDF全文

CHEN Gan  ZHENG Wen-jun  WANG Xu-long  ZHANG Pei-zhen  XIONG Jian-guo  YU Jin-xing  LIU Xing-wang  BI Hai-yun  LIU Jin-rui  AI Ming 《地震地质》2017,39(5):871-888

Qilian Shan and Hexi Corridor, located in the north of Tibetan plateau, are the margin of Tibetan plateau's tectonic deformation and pushing. Its internal deformations and activities can greatly conserve the extension process and characteristics of the Plateau. The research of Qilian Shan and Hexi Corridor consequentially plays a significant role in understanding tectonic deformation mechanism of Tibetan plateau. The northern Yumushan Fault, located in the middle of the northern Qilian Shan thrust belt, is a significant component of Qilian Shan thrust belt which divides Yumushan and intramontane basins in Hexi Corridor. Carrying out the research of Yumushan Fault will help explain the kinematics characteristics of the northern Yumushan active fault and its response to the northeastward growth of the Tibetan plateau.Because of limited technology conditions of the time, different research emphases and some other reasons, previous research results differ dramatically. This paper summarizes the last 20 years researches from the perspectives of fault slip rates, paleao-earthquake characteristics and tectonic deformation. Using aerial-photo morphological analysis, field investigation, optical simulated luminescence(OSL)dating of alluvial surfaces and topographic profiles, we calculate the vertical slip rate and strike-slip rate at the typical site in the northern Yumushan Fault, which is(0.55±0.15)mm/a and(0.95±0.11), respectively. On the controversial problems, namely "the Luotuo(Camel)city scarp" and the 180 A.D. Biaoshi earthquake, we use aerial-photo analysis, particular field investigation and typical profile dating. We concluded that "Luotuo city scarp" is the ruin of ancient diversion works rather than the fault scarp of the 180 A.D. Biaoshi earthquake. Combining the topographic profiles of the mountain range with fault characteristics, we believe Yumu Shan is a part of Qilian Shan. The uplift of Yumu Shan is the result of Qilian Shan and Yumu Shan itself pushing northwards. Topographic profile along the crest of the Yumu Shan illustrates the decrease from its center to the tips, which is similar to the vertical slip rates and the height of fault scarp. These show that Yumu Shan is controlled by fault extension and grows laterally and vertically. At present, fault activities are still concentrated near the north foot of Yumu Shan, and the mountain ranges continue to rise since late Cenozoic.  相似文献   

A BRIEF INTRODUCTION TO THE NEW METHOD FOR RIVER PROFILE ANALYSIS: Integral Approach          下载免费PDF全文

WANG Yi-zhou  ZHANG Hui-ping  ZHENG De-wen  YU Jing-xing  LI Chao-peng  XIAO Lin 《地震地质》2017,39(6):1111-1126

The topography and geomorphology of active orogens result from the interaction of tectonics and climate. In most orogens, a fluvial channel is most sensitive to the coupling between tectonics, lithology, and climate. Meanwhile, the related signals have been recorded by both the drainage geometry and channel longitudinal profile. Thus, how to extract tectonic information from fluvial channels has been a focused issue in geologic and geomorphologic studies. The well known stream-power river incision model bridges the gap between tectonic uplift, river incision and channel profile change, making it possible to retrieve rock uplift pattern from river profiles. In this model, the river incision rate depends on the rock erodibility, contributing drainage area and river gradient. The steady-state form of the river incision model predicts a power-law scaling between the drainage area and channel gradient. Via a linear regression to the log-transformed slope-area data, the slope and intercept are channel concavity and steepness indices, respectively. The concavity relates to lithology, climatic setting and incision process while the channel steepness can be used to map the spatial pattern of rock uplift. For its simple calculation process, the slope-area analysis has been widely used in the study of tectonic geomorphology during past decades. However, to calculate river slope, the coarse channel elevation data must be smoothed, re-sampled, and differentiated without any reasonable smooth window or rigid mathematical fundamentals. One may lose important information and derive stream-power parameters with high uncertainties. In this paper, we introduce the integral approach, a procedure that has been widely used in the latest four years and demonstrated to be a better method for river profile analysis than the traditional slope-area analysis. Via the integration to the steady-state form of the stream-power river incision equation, the river longitudinal profile can be converted into a straight line of which the independent variable is the integral quantity χ with the unit of distance and the dependent variable is the relative channel elevation. We can calculate the linear correlation coefficient between elevation and χ based on a series of concavity values and find the best linear fit to be the reasonable channel concavity index. The slope of the linear fit to the χ value and elevation is simply related to the ratio of the uplift rate to the erodibility. Without calculating channel slope, the integral approach makes up for the drawback of the slope-area analysis. Meanwhile, via the integral approach, a steady-state river profile can be expressed as a continuous function, which can provide theoretical principle for some geomorphic parameters (e.g., slope-length index, hypsometric integral). In addition, we can determine the drainage network migration direction using this method. Therefore, the integral approach can be used as a better method for tectonogeomorphic research.  相似文献   

南黄海OBS数据转换横波分析及其地质意义   总被引：2，自引：2，他引：0       下载免费PDF全文

赵维娜  张训华  孟祥君  吴志强  祁江豪  郝天珧  郑彦鹏 《地球物理学报》2017,60(4):1479-1490

多分量地震勘探在减小地球物理反演问题多解性的同时提供了更丰富的地下信息,可以从量化的意义上真正实现岩性勘探.由于地壳结构的复杂性及转换横波的特殊性,南黄海地壳结构研究中基本未涉及横波.本文使用南黄海OBS数据,在不同剖面上对比分析纵横波走时、视速度以及质点运动轨迹,基于纵波理论模型对转换横波震相进行射线追踪和走时试算,识别并拟合了来自不同地层的转换横波震相.研究表明,北部坳陷中主要发生了PPS转换,转换界面为陆相沉积层底界面.千里岩隆起区除了发生转换界面为陆相沉积底界面的PPS转换还有转换界面为海底的PSS转换.断层活动引起岩石破碎,高波速比特征的断层边界为胶莱盆地在海上部分的边界圈定再添证据.千里岩地区高速地层成分含有花岗岩,其纵横波速比为1.67~1.68;推测北部坳陷中的海相沉积北-南地层不同,依次为碳酸盐岩及砂岩两类地层.  相似文献   

汶川地震科学钻探3号井孔附近微震震源参数确定及其意义   总被引：4，自引：1，他引：3       下载免费PDF全文

叶庆东  丁志峰  王生文  余大新  郑晨 《地球物理学报》2017,60(7):2716-2732

基于微震监测仪器频带及波形记录的时频特征,我们筛选出汶川地震科学钻探3号井孔周围微震台阵2012年记录的218个t_s-t_p1 s的微震.通过盖戈法与和达法相结合确定微震震源的几何参数,发现这些微震分布大体呈NE-SW展布,与龙门山断裂带的走向基本一致.无论是采用《地震台站观测规范》中的量规函数(量规函数GF)还是李学政等(2003)的量规函数(量规函数LXZ),近震震级均与矩震级呈现出较好的线性关系,向震级小的一端延伸时都表现为M_LM_W,但采用李学政等的量规函数时该趋势更加明显.同时采用Brune和Boatwright震源谱衰减模型对观测震源谱的拟合表明拐角频率具有模型依赖性:基于Brune模型拟合得到的拐角频率大于基于Boatwright模型得到的拐角频率.无论基于哪一种模型,矩震级与拐角频率、破裂半径的对数线性关系均较弱,与应力降、视应力的对数则存在较好的线性关系.这些关系不支持应力降、折合能量、视应力为常数的观点,表明微震与大地震的震源物理过程存在差异.视应力与应力降成比例,比例系数小于0.5,表明破裂动力学模式符合SavageWood模式.近震震级与矩震级拟合关系Mw=a+bM_L中b的大小与应力降和地震矩的关系有关,△σ∝M_0~γ,则b=1/(1+γ),因此从b的大小可以粗略地判断应力降与地震矩的关系.本文对应于γ≈1的情况,与基于量规函数LXZ得到的近震震级与矩震级关系中系数b=0.53吻合,这说明仅从辐射能量的角度考虑量规函数LXZ较量规函数GF准确.  相似文献   

台风激发的第二类地脉动特征及激发模式分析   总被引：3，自引：1，他引：2       下载免费PDF全文

郑露露  林建民  倪四道  祝捍皓  郑红 《地球物理学报》2017,60(1):187-197

0.003~1 Hz频段的地脉动主要来源于海浪运动与固体地球的耦合作用,台风引起的强烈海浪运动往往可使地脉动能量显著增强.由于涉及大气-海洋-固体地球三个圈层之间的复杂动量传递与耦合过程,迄今为止,关于台风激发地脉动的具体源区位置及激发机制尚存在争议.本文选取日本、中国东南沿海及台湾地区的地震台站波形连续记录,研究了2008年台风"森拉克"和"黑格比"激发地脉动的时频特征,开展相应数值模拟,并与观测数据进行了对比分析研究.结果表明台风激发第二类地脉动存在两种主要模式:(1)近岸源区激发,即台风引起波浪入射至海岸反射并与后续来波相互作用形成驻波作用于海底而激发;(2)台风中心附近源区激发,即台风中心移动过程中不同时期激发的同频率波浪相向传播、相互作用产生驻波作用于海底而激发,源区位置主要集中于台风中心左后方.此外,结合波浪再分析数据、台风风场特征,我们进一步对第二类地脉动激发过程中的影响因素进行了分析,发现:第一种模式激发的地脉动与近岸源区波浪场强度、观测点至源区距离及台风中心至海岸线距离等因素相关;而第二种模式激发的地脉动则主要受台风中心附近波浪场的频率成分与传播方向影响.  相似文献   

纵向和横向同时约束AVO反演          下载免费PDF全文

霍国栋  杜启振  王秀玲  陈刚  郑笑雪 《地球物理学报》2017,60(1):271-282

为了提高AVO(amplitude versus offset)反演结果的精度和横向连续性,本文提出了一种新的AVO反演约束方法,该方法结合贝叶斯原理和卡尔曼滤波算法实现了对反演参数纵向和横向的同时约束.文章首先结合反演参数的纵向贝叶斯先验概率约束和反演参数的横向连续性假设建立了与卡尔曼滤波算法对应的AVO反演系统的数学模型,然后将该数学模型代入卡尔曼滤波算法框架,利用卡尔曼滤波算法实现了双向约束AVO反演.二维模型测试和实际数据测试结果表明,相对于单纯的纵向贝叶斯先验概率约束,双向约束能更准确地刻画参数的横向变化,得到更准确、横向连续性更好的反演结果.  相似文献