Assessment of predictions of the response of the Hualien containment model during forced vibration tests     

J. Enrique Luco  Francisco C. P. de Barros 《Soil Dynamics and Earthquake Engineering》2004,24(12):1013-1035

Blind predictions for the response of the 1/4-scale reinforced concrete Hualien (Taiwan) containment model during forced vibration tests are compared with the observed data. The predictions obtained by the CLASSI approach reflect the experimental conditions prior to and after backfill of the soil surrounding the embedded foundation. The experimental data show a strong and unexpected coupling between the response in the NS and EW directions which is not present in the results for the axisymmetric theoretical models. Also, significant differences can be seen between the experimental responses in the two orthogonal horizontal directions which minimize cross-axis coupling. Although these differences are not accounted for in the theoretical models, the discrepancies between predictions and observations are within the uncertainty of the structural and geotechnical data. The obtained differences between predictions and observations give an excellent measure of the prediction error that can be expected in this type of analysis from uncertainty in the data. A detailed assessment of the initial structural and geotechnical data based on extensive comparisons with the results of previous identification studies is also presented. Finally, comparisons between the observed response and calculations based on revised models for the structure and the soil show that current methods of analysis can account accurately for the observed response.  相似文献   

Non-linear channel–shoal dynamics in long tidal embayments     

G. P. Schramkowski  H. M. Schuttelaars  H. E. de Swart 《Ocean Dynamics》2004,54(3-4):399-407

The dynamics of finite-amplitude bed forms in a tidal channel is studied with the use of an idealized morphodynamic model. The latter is based on depth-averaged equations for the tidal flow over a sandy bottom. The model considers phenomena on spatial scales of the order of the tidal excursion length. Transport of sediment mainly takes place as suspended load. The reference state of this model is characterized by a spatially uniform M₂ tidal current over a fixed horizontal bed. The temporal evolution of deviations from this reference state is governed by amplitude equations: these are a set of non-linear equations that describe the temporal evolution of bed forms. These equations are used to obtain new morphodynamic equilibria which may be either static or time-periodic. Several of these bottom profiles show strong similarity with the tidal bars that are observed in natural estuaries. The dependence of the equilibrium solutions on the value of bottom friction and channel width is investigated systematically. For narrow channels (width small compared to the tidal excursion length) stable static equilibria exist if bottom friction is slightly larger than r_cr. For channel widths more comparable to the tidal excursion length, multiple stable steady states may exist for bottom friction parameter values below r_cr. Regardless of channel width, stable time-periodic equilibria seem to emerge as the bottom friction is increased.Responsible Editor: Jens Kappenberg  相似文献   

A model for grain-size sorting over tidal sand ridges     

M. Walgreen  H.E. de Swart  D. Calvete 《Ocean Dynamics》2004,54(3-4):374-384

A model was developed and analyzed to quantify the effect of graded sediment on the formation of tidal sand ridges. Field data reveal coarse (fine) sediment at the crests (in the troughs), but often phase shifts between the mean grain-size distribution and the bottom topography occur. Following earlier work, this study is based on a linear stability analysis of a basic state with respect to small bottom perturbations. The basic state describes an alongshore tidal current on a coastal shelf. Sediment is transported as bed load and dynamic hiding effects are accounted for. A one-layer model for the bed evolution is used and two grain size classes (fine and coarse sand) are considered. Results indicate an increase in growth and migration rates of tidal sand ridges for a bimodal mixture, whilst the wavelength of the ridges remains unchanged. A symmetrical externally forced tidal current results in a grain-size distribution which is in phase with the ridges. Incorporation of an additional external M₄ tidal constituent or a steady current results in a phase shift between the grain-size distribution and ridge topography. These results show a general agreement with observations. The physical mechanism responsible for the observed grain-size distribution over the ridges is also discussed.Responsible Editor: Jens Kappenberg  相似文献   

Neuralizing target superresolution algorithms   总被引：1，自引：0，他引：1  

Collins  M. de Jong  M. 《Geoscience and Remote Sensing Letters, IEEE》2004,1(4):318-321

Tatem et al. (2001) have designed a Hopfield network-based algorithm for superresolving discrete targets that are larger than the sample spacing of an image. The algorithm iteratively minimizes a criterion function that contains a sigmoidal activation term. We have altered their algorithm to bring it in line with Hopfield's original network by reducing the pseudotemperature of the sigmoid. We found that smaller values of the pseudotemperature lead to faster convergence to a solution and resulting solutions that are more accurate.  相似文献   

Reversibility of radiocaesium sorption on illite     

Arjan de Koning  Rob N.J Comans 《Geochimica et cosmochimica acta》2004,68(13):2815-2823

Adsorption of trace amounts of radiocaesium on NH₄-, K-, and Na-saturated Fithian illite and subsequent desorption by 1 M NH₄ showed that a substantial amount of radiocaesium (44%, 46%, and 91% for NH₄-, K-, and Na-illite, respectively) cannot be desorbed after only 5 min of adsorption. Our results suggest that this instantaneous fixation is caused by the collapse of the frayed edges of the clay mineral and the relatively high concentration of radiocaesium building up in solution in the batch desorption experiments. Consequently, commonly applied high-NH₄ extractions underestimate truly exchangeable amounts of radiocaesium in soils and sediments containing illitic clay minerals. The rate of desorption of trace amounts of radiocaesium from the solids using high NH₄ or Cs concentrations has a half-life of about 2 yr, reflecting radiocaesium desorption from (partially) collapsed interlayers. Extraction of radiocaesium from illite after 5 min of contact time with a Cs-selective adsorbent or a 1 × 10^-6 M CsCl solution shows that 100% of the bound radiocaesium is readily available. The desorption rate in the presence of a Cs-selective adsorbent has a half-life of about 0.2 yr. Desorption of radiocaesium from illite using different ammonium concentrations shows that radiocaesium partitioning follows reversible ion-exchange theory if the NH₄ concentration is below 1 × 10^-4 M, and sufficient time (weeks) is allowed for the reaction to proceed. Thus, radiocaesium sorption reversibility in the natural environment is much higher than generally assumed, and equilibrium solid/liquid partitioning may be assumed for the long-term modelling of radiocaesium mobility in the natural environment. In the particular case of anoxic freshwater sediments with very high NH₄ concentrations in the pore waters (up to several mmol.L^-1), collapse of the frayed edges of illite may occur, influencing radiocaesium partitioning. If collapse occurs before radiocaesium adsorbs to illite, high caesium sorption reversibility as measured by high-NH₄ extraction can be expected because further collapse of the frayed edges during the extraction procedure will be limited. This effect has indeed been observed earlier in the extraction of radiocaesium from anoxic freshwater sediments with high-NH₄ solutions and was as yet unexplained.  相似文献   

Beryllium-10 in Australasian tektites: Constraints on the location of the source crater     

P. Ma  K. Aggrey  C. Tonzola  C. Schnabel  P. de Nicola  J.T. Wasson  L. Brown  R. Middleton 《Geochimica et cosmochimica acta》2004,68(19):3883-3896

By using accelerator mass spectrometry we have measured the ¹⁰Be concentrations of 86 Australasian tektites. Corrected to the time of tektite production ∼0.8 My ago, the ¹⁰Be concentrations (10⁶ atom/g) range from 59 for a layered tektite from Huai Sai, Thailand, to 280 for an australite from New South Wales, Australia. The average value is 143 ± 50. When tektites are sorted by country, their average measured ¹⁰Be concentrations increase slowly with increasing distance from Southeast Asia, the probable location of the tektite producing event, from 59 ± 9 for 6 layered tektites from Laos to 136 ± 20 for 20 splash-form tektites from Australia. The lowest ¹⁰Be concentrations for tektites fall on or within a contour centered off the shore of Vietnam, south of the Gulf of Tonkin (107°E; 17°N), but also encompassing two other locations in the area of northeastern Thailand previously proposed for the site of a single tektite-producing impact. The ¹⁰Be concentrations of layered tektites show only a weak anticorrelation (R ∼ −0.3) with the numbers of relict crystalline inclusions.Loosely consolidated, fine-grained terrestrial sediments or recently consolidated sedimentary rocks are the most likely precursor materials. Dilution of sediments with other kinds of rock raises problems in mixing and is not supported by petrographic data. Sedimentary columns that have the right range of ¹⁰Be concentrations occur off the coasts of places where sedimentation rates are high relative to those in the deep sea. A single impact into such a region, 15 to 300 m thick, could have propelled near-surface, high-¹⁰Be material farthest—to Australia—while keeping the deeper-lying, low-¹⁰Be layers closer to home. We do not rule out, however, other proposed mechanisms for tektite formation.  相似文献   

Magnetic fabrics and rock magnetism of Proterozoic dike swarm from the southern São Francisco Craton, Minas Gerais State, Brazil     

Maria Irene Bartolomeu Raposo  Alexandre O. Chaves  Paulo Lojkasek-Lima  Manoel Souza D'Agrella-Filho  Wilson Teixeira   《Tectonophysics》2004,378(1-2):43-63

Magnetic fabric and rock magnetism studies were performed on 32 mafic dikes of a Proterozoic dike swarm from the southern São Francisco Craton (SFC; Minas Gerais State, SE Brazil). Magnetic anisotropies were determined by applying anisotropy of low-field magnetic susceptibility (AMS) and anisotropy of remanent magnetization (ARM). The latter was performed imposing both anhysteretic (total (AAR) and partial pAAR)) and isothermal remanence magnetizations (AIRM). Partial anhysteretic remanence anisotropy was performed based on remanent coercivity spectra from a pilot specimen of each site. In most sites, AMS is dominantly carried by ferromagnetic minerals, however, in some sites, the paramagnetic contribution exceeds 70% of bulk susceptibility. Rock magnetism and thin section analysis allow classifying the dikes as non-hydrothermalized and hydrothermalized. Magnetic measurement shows that the mean magnetic susceptibility is usually lower than 5×10⁻³ (SI). Ti-poor titanomagnetites up to pure magnetite pseudo-single-domain (PSD) grain sizes carry the majority of magnetic fabrics for non-hydrothermalized dikes whereas coarse to fine grained Ti-poor titanomagnetites carry the majority of magnetic fabrics for hydrothermalized dikes.Three primary AMS fabrics are recognized which are coaxial with ARM fabric, except for two dikes, from both non-hydrothermalized and hydrothermalized dikes. Normal AMS fabric surprisingly is not dominant (31%). The parallelism between AMS, pAAR_0–30, pAAR_30–60 and pAAR_60–90 fabrics in the hydrothermalized dikes indicates that magnetic grains formed due to late-stage crystallization or to remobilization of iron oxides due to hydrothermal alteration after dike emplacement have acquired a mimetic fabric coaxial with the primary fabric given by coarse-grained early crystallized Ti-poor titanomagnetites. This fabric is interpreted as magma flow in which the analysis of K_max inclination permitted the inference that the dikes were fed by horizontal or subhorizontal fluxes (K_max<30°). Intermediate AMS fabric is the most important (41%) in the investigated swarm. It is interpreted as due to vertical compaction of a static magma column with the minimum stress along the dike strike. ARM determinations for these sites also remained intermediate except for two dikes. In one of them, AIRM fabric resulted in normal AMS fabric while for the other AAR fabric resulted in inverse AMS fabric. A combination of AMS and ARM fabrics suggest that magmatic fabric for both dikes were overprinted by some late local event, probably related to Brasiliano orogenic processes after dike emplacement. InverseInverse AMS fabric is a minority (four dikes). ARM determinations also remained inverse suggesting a primary origin for inverse AMS fabric.  相似文献   

Tourmalinites from the Eastern Sierras Pampeanas, Argentina     

S. M. Tourn  C. J. Herrmann  S. Ametrano  M. K. de Brodtkorb   《Ore Geology Reviews》2004,24(3-4):229

In the eastern Sierras Pampeanas, Central Argentina, tourmalinites and coticules are found in close association with stratabound scheelite deposits in metamorphic terranes. In Sierra Grande (Agua de Ramón and Ambul districts) and Sierra de Altautina, tourmalinites are associated with stratabound scheelite deposits related to orthoamphibolites. In the Pampa del Tamboreo area, tourmalinites are located in biotite schists stratigraphically related to acid to intermediate metavolcanic rocks and scheelite-bearing quartzites.The mineral chemistry and boron isotopic compositions of tourmalinite-hosted and vein-hosted tourmalines are investigated. Overall, the tourmalines belong to the dravite-schorl series and are generally aluminous; Fe/(Fe+Mg) ranges from 0.33 to 0.85, Al/(Al+Fe+Mg) from 0.66 to 0.76 and the amount of X-site vacancy (0.12–0.48) indicates significant foitite components. Their boron isotopic compositions (δ¹¹B) are from −24.0‰ to−15.0‰.Similar mineral chemistries and boron isotopic values for tourmaline in tourmalinites related to stratabound scheelite mineralisation and in tungsten-bearing quartz veins suggest a common source for the boron and probably the tungsten. The field, chemical and isotopic relationships are consistent with tungsten and boron in quartz-vein deposits being remobilised from stratabound scheelite and tourmalinite, dominantly by liquid-state transfer associated with regional shear zones. Tungsten and boron in the original sedimentary sequence (now meta-exhalites) are ascribed to volcanogenic exhalations.  相似文献   

Vegetation dynamics during the late Pleistocene in the Barreirinhas region, Maranhão State, northeastern Brazil, based on carbon isotopes in soil organic matter     

Luiz Carlos Ruiz Pessenda  Adauto de Souza Ribeiro  Ramon Aravena  José Albertino Bendassolli 《Quaternary Research》2004,62(2):183-193

The study place is in the Barreirinhas region, Maranhão State, northeastern Brazil. A vegetation transect of 78 km was studied among four vegetation types: Restinga (coastal vegetation), Cerrado (woody savanna), Cerradão (dense woody savanna), and Forest, as well as three forested sites around Lagoa do Caçó, located approximately 10 km of the transect. Soil profiles in this transect were sampled for δ¹³C analysis, as well as buried charcoal fragments were used for ¹⁴C dating. The data interpretation indicated that approximately between 15,000 and ∼9000 ¹⁴C yr B.P., arboreal vegetation prevailed in the whole transect, probably due to the presence of a humid climate. Approximately between ∼9000 and 4000-3000 ¹⁴C yr B.P., there was the expansion of the savanna, probably related to the presence of drier climate. From ∼4000-3000 ¹⁴C yr B.P. to the present, the results indicated an increase in the arboreal density in the area, due to the return to a more humid and probably similar climate to the present. The presence of buried charcoal fragments in several soil depths suggested the occurrence of palaeofires during the Holocene. The vegetation dynamic inferred in this study for northeastern Brazil is in agreement with the results obtained in areas of Amazon region, based on pollen analysis of lake sediments and carbon isotope analysis of soil organic matter (SOM), implying than similar climatic conditions have affected these areas during the late Pleistocene until the present.  相似文献   

Spatial correlation of deformation and mineral reaction in experimentally deformed plagioclase–olivine aggregates     

A.A. de Ronde  R. Heilbronner  H. Stünitz  J. Tullis 《Tectonophysics》2004,389(1-2):93-109

Shear deformation of hot pressed plagioclase–olivine aggregates was studied in the presence and absence of mineral reaction. Experiments were performed at 900 °C, 1500 MPa, and a constant shear strain rate of 5×10⁻⁵ s⁻¹ in a solid medium apparatus. Whether the mineral reaction between plagioclase and olivine takes place or not is controlled by choosing the appropriate plagioclase composition; labradorite (An₆₀) does not react, anorthite (An₉₂) does. Labradorite–olivine aggregates deformed without reaction are very strong and show strain hardening throughout the experiment. Syndeformational reaction between olivine and anorthite causes a pronounced strain weakening. The reaction produces fine-grained opx–cpx–spinel aggregates, which accommodate a large fraction of the finite strain. Deformation and reaction are localised within a 0.5-mm-wide sample. Three representative samples were analysed for their fabric anisotropy R* and shape-preferred orientation α* (fabric angle with the shear plane) using the autocorrelation function (ACF). Fabric anisotropy can be calibrated to quantify strain variations across the sheared samples. In the deformed and reacted anorthite–olivine aggregate, there is a strong correlation between reaction progress and strain; regions of large shear strain correspond to regions of maximum reaction progress. Within the sample, the derived strain rate variations range up to almost one order of magnitude.  相似文献