Protective effect of topically applied polypeptide from Chlamys farreri against ultraviolet radiation-induced chronic skin damage in guinea pig     

Chi Mingliang  Cao Pengli  Yu Guoying  Zhu Li  Wang Yuejun  Wang Chunbo 《中国海洋湖沼学报》2003,21(4):319-323

Polypeptide fromChlamys farreri (PCF), a topical polypeptide isolated fromChlamys farreri, was used in this experiment aimed to investigate the photoprotective effect of PCF against chronic skin damage induced by ultraviolet A (UVA) and ultraviolet B (UVB) radiation. The chronic ultraviolet-irradiated guinea pig model was established, and visible changes in the skin including wrinkling, sagging and erythema were observed. Malondialdehyde (MDA) and antioxidant enzymes including superoxide dismutase (SOD) and glutathione peroxidase (GSH-px) in the dorsal skin were determined using biochemical methods. The results showed: (1) PCF (5 % and 20%) could greatly protect the dorsal skin of guinea pig against wrinkling, sagging and erythema induced by UV radiation in a concentration-dependent manner. (2) PCF could reduce MDA formation in the dorsal skin caused by UV irradiation, while increasing the activities of SOD and GSH-px. (3) The differences among the PCF groups and UV model group were significant (P<0.05,P<0.01). These results indicated that topical application, of PCF provided broad solar UV spectrum photoprotection; and that the antioxidant property of PCF might play a role in photoprotection. Project No. 39970638 supported by the NSFC, and the Science and Technology Bureau of Qingdao (No. 2001-28-50).  相似文献   

Study of a model for correcting the effects of horizontal advection on surface fluxes measurement based on remote sensing     

Tian  Jing  Zhang  Renhua  Sun  Xiaomin  Zhu  Zhilin  Zhou  Yanlian 《中国科学:地球科学(英文版)》2006,49(2):273-280

As well known, the methods of remote sensing and Bowen Ratio for retrieving surface flux are based on energy balance closure; however, in most cases, surface energy observed in experiment is lack of closure. There are two main causes for this: one is from the errors of the observation devices and the differences of their observational scale; the other lies in the effect of horizontal advection on the surface flux measurement. Therefore, it is very important to estimate the effects of horizontal advection quantitatively. Based on the local advection theory and the surface experiment, a model has been proposed for correcting the effect of horizontal advection on surface flux measurement, in which the relationship between the fetch of the measurement and pixel size for remote sensed data was considered. By means of numerical simulations, the sensitivities of the main parameters in the model and the scaling problems of horizontal advection were analyzed. At last, by using the observational data acquired in agricultural field with relatively homogeneous surface, the model was validated.

  相似文献   

Effect of spatial variation characteristics on contouring of design storm depth     

Ke‐Sheng Cheng  Chiang Wei  Yen‐Ben Cheng  Hui‐Chung Yeh 《水文研究》2003,17(9):1755-1769

The ordinary kriging method, a geostatistical interpolation technique, was applied for developing contour maps of design storm depth in northern Taiwan using intensity–duration–frequency (IDF) data. Results of variogram modelling on design storm depths indicate that the design storms can be categorized into two distinct storm types: (i) storms of short duration and high spatial variation and (ii) storms of long duration and less spatial variation. For storms of the first category, the influence range of rainfall depth decreases when the recurrence interval increases, owing to the increasing degree of their spatial independence. However, for storms of the second category, the influence range of rainfall depth does not change significantly and has an average of approximately 72 km. For very extreme events, such as events of short duration and long recurrence interval, we do not recommend usage of the established design storm contours, because most of the interstation distances exceed the influence ranges. Our study concludes that the influence range of the design storm depth is dependent on the design duration and recurrence interval and is a key factor in developing design storm contours. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Marine Ingressive Events Recorded in Epicontinental Sequences:Example from the Cretaceous Songliao Basin of NE China in Comparison with the Triassic Central Europe Basin of SW Germany     

WANG Pujun  LIU Wanzhu  YIN Xiuzhen 《东北亚地学研究》2002,(1)

Songliao Basin is filled predominantly with continental facies sediments including alluvial fan, fluvial plain, fan delta , lacustrine delta, shore ?shallow lacustrine, beach salty flat, semi - deep to deep lacustrine, subaqueous gravity flow, lacustrine swamp and pyroclastic sediments. However, some event units were formed during lake - marine linking periods of the Mid - Cretaceous in the basin, which include black shales with high values for salinity ( Sr/Ba) , alkalinity (Ca Mg)/ (Si Al) , reducibility ( Ni Zn)/Ga and sulfide sulfur as well as heavy isotopes. The Breitenholz ?section to be represen-ted for facies comparison with the Cretaceous evaporitic series in Northeast China is localized in Southwest Germany. Stratig-raphically it belongs to the Crabfeld Formation of Keuper of the Germanic Triassic corresponding to Ladinian - Camian of the international reference scale, and is generally called Lower Gipskeuper. The Germanic Triassic was deposited in the epiconti-nental(cratonic) central Euro  相似文献   

The FAST/SKA site selection in Guizhou province   总被引：1，自引：0，他引：1  

B. Zhu  Y. Nie  R. Nan  B. Peng 《Astrophysics and Space Science》2001,278(1-2):213-218

Many karst depressions with diameters of 300 m to 500 m, suitable for constructing Arecibo-style radio telescopes, were identified in the south of Guizhou Province by Remote Sensing (RS) and Geographic Information System (GIS) technologies together with field investigations. Fundamental topography and landform databases were established for 391candidate depressions, and using GIS the3-dimensional images of depressions, at a scale of 1:10000, were then simulated to fit a spherical antenna. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads     

Cheng‐Der Wang  Jyh‐Jong Liao 《国际地质力学数值与分析法杂志》2002,26(14):1449-1476

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

The influence of a non‐associated flow rule on the calculation of the factor of safety of soil slopes     

Yu‐Jie Wang  Jian‐Hua Yin  C. F. Lee 《国际地质力学数值与分析法杂志》2001,25(13):1351-1359

This paper presents a method that incorporates a non‐associated flow rule into the limit analysis to investigate the influence of the dilatancy angle on the factor of safety for the slope stability analysis. The proposed method retain's the advantage of the upper bound method, which is simple and has no stress involvement in the calculation of the energy dissipation and the factor of safety. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

Abundance and isotopic composition of noble gases in metal and graphite of the Bohumilitz IAB iron meteorite     

Teruyuki MARUOKA  Jun‐ichi MATSUDA  Gero KURAT 《Meteoritics & planetary science》2001,36(5):597-609

Abstract— Abundances and isotopic compositions of noble gases in metal and graphite of the Bohumilitz IAB iron meteorite were measured. The abundance ratios of spallogenic components in metal reveal a ³He deficiency which is due to the diffusive loss of parent isotopes, that is, tritium (Tilles, 1963; Schultz, 1967). The diffusive loss likely has been induced by thermal heating by the Sun during cosmic‐ray exposure (～160 Ma; Lavielle et al, 1999). Thermal process such as impact‐induced partial loss may have affected the isotopic composition of spallogenic Ne. The ¹²⁹Xe/¹³¹Xe ratio of cosmogenic components in the metal indicates an enhanced production of epi‐thermal neutrons. The abundance ratios of spallogenic components in the graphite reveal that it contained small amounts of metal and silicates. The isotopic composition of heavy noble gases in graphite itself was obtained from graphite treated with HF/HCl. The isotopic composition of the etched graphite shows that it contains two types of primordial Xe (i.e., Q‐Xe and El Taco Xe). The isotopic heterogeneity preserved in the Bohumilitz graphite indicates that the Bohumilitz graphite did not experience any high‐temperature event and, consequently, must have been emplaced into the metal at subsolidus temperatures. This situation is incompatible with an igneous model as well as the impact melting models for the IAB‐IIICD iron meteorites as proposed by Choi et al. (1995) and Wasson et al (1980).  相似文献   

CSCO_3 CYCLES IN SALAWUSU RIVER BASINSINCE 150KA B.P.     

LUO Kai-li    LI Bao-sheng    ZHU Yi-zhi  JIN He-ling  ZHANG David Dian  YAN Man-cun  LI Hou-xin  YAO Chun-xia  ZHANG Yu-hongf . Department of Geography  South China Normal University  Guangzhou  P. R. China  . State Key Labor 《中国地理科学(英文版)》2001,11(4):336-342

About 70years ago，Frenc卜卜alaeohdoglst回LL sc卜dars al卜ome and a卜road卜ave successively con－HARD de Chardin P．et al．Initiated the Quaternary ducted large amount ofwork on the Later Quaternarygeologlcal research In the ＞alawusu River Basin of strata（TEILHARD，1924； YUAN，1978； LI，1987；desert region of Northern China and established th，ZHENG，1989； SUN et al，1996； LI et al，1993），Salawusu Formation门EILHARD，1924）．Sine，then，palaeobiology…  相似文献   

Radar observations of Itokawa in 2004 and improved shape estimation     

Steven J. Ostro  Lance A. M. Benner  Christopher Magri  Jon D. Giorgini  Randy Rose  Raymond F. Jurgens  Donald K. Yeomans  Alice A. Hine  Michael C. Nolan  Daniel J. Scheeres  Stephen B. Broschart  Mikko Kaasalainen  Jean‐Luc Margot 《Meteoritics & planetary science》2005,40(11):1563-1574

Abstract— We present June 2004 radar images of asteroid 25143 Itokawa (1998 SF36) that improve upon the longitude‐latitude coverage of images obtained in 2001 by Ostro et al. (2004) and use the 2001–2004 data to refine that paper's constraints on Itokawa's shape. The 2004 images, the first of the asteroid's southern side, look distinctly different from the 2001 images, revealing leading edges that are much more curved and rugged than the nearly convex leading edges seen at northern latitudes in 2001. Itokawa is shaped like a slightly asymmetrical, bent, lumpy ellipsoid with dimensions along the principal axes within 10% of 594 times 320 times 288 m. To illustrate the uncertainty space associated with shape reconstruction from images with suboptimal orientational coverage, we present two alternative three‐dimensional models of the object.  相似文献