Numerical Simulation on Flow Past Two Side-by-Side Inclined Circular Cylinders at Low Reynolds Number     

Liu  Cai  Gao  Yang-yang  Qu  Xin-chen  Wang  Bin  Zhang  Bao-feng 《中国海洋工程》2019,33(3):344-355

A series of three-dimensional numerical simulations is carried out to investigate the effect of inclined angle on flow behavior behind two side-by-side inclined cylinders at low Reynolds number Re=100 and small spacing ratio T/D=1.5 (T is the center-to-center distance between two side-by-side cylinders, D is the diameter of cylinder). The instantaneous and time-averaged flow fields, force coefficients and Strouhal numbers are analyzed. Special attention is focused on the axial flow characteristics with variation of the inclined angle. The results show that the inclined angle has a significant effect on the gap flow behaviors behind two inclined cylinders. The vortex shedding behind two cylinders is suppressed with the increase of the inclined angle as well as the flip-flop gap flow. Moreover, the mean drag coefficient, root-mean-square lift coefficient and Strouhal numbers decrease monotonously with the increase of the inclined angle, which follows the independent principle at small inclined angles.  相似文献   

航向测量仪在车载三维信息采集系统中的应用     

曲文乾  叶泽田  王雷斌  胡晓乐  侯明辉 《测绘科学》2009,34(2)

航向测量仪(Vector Sensor)的作用就是为车载惯导系统初始化提供所必须的航向角;根据不同的应用环境和特性,用航向测量仪获取在各种条件下的航向角数据,通过对这些数据在精度、稳定性以及解算时间等性能上的对比分析,得到该仪器的最佳工作状态,进而获取该状态下的航向数据;通过实际的实验测试,此状态下的数据在精度和稳定性方面都能满足惯导系统的需求。  相似文献   

3S技术在堰塞湖应急治理中的应用研究     

曲来超  袁占良  王志龙  金武卿 《测绘与空间地理信息》2009,32(1)

以四川堰塞湖为例,首先阐述了3S技术的特点、项目实施基本指标和项目作业技术系统;其次重点叙述了3S技术在项目实施中的技术流程,包括资料收集、地形图矢量化、矢量数据空间分析、TM遥感影像处理、野外调查建立解译标志、遥感解译、土壤侵蚀强度计算、解译成果野外校核、数据库集成等步骤.最后列举了如何利用3S技术解决危情作出的贡献.  相似文献   

Characteristics and origins of middle Miocene mounds and channels in the northern South China Sea     

Yufeng Li  Gongcheng Zhang  Renhai Pu  Hongjun Qu  Huailei Shen  Xueqin Zhao 《海洋学报(英文版)》2021,40(2):65-80

Numerous elongated mounds and channels were found at the top of the middle Miocene strata using 2D/3D seismic data in the Liwan Sag of Zhujiang River Mouth Basin(ZRMB) and the Beijiao Sag of Qiongdongnan Basin(QDNB). They occur at intervals and are rarely revealed by drilling wells in the deepwater areas. Origins of the mounds and channels are controversial and poorly understood. Based on an integrated analysis of the seismic attribute, palaeotectonics and palaeogeography, and drilling well encountering a mound, research results show that these mounds are dominantly distributed on the depression centres and/or slopes of the Liwan and Beijiao sags and developed in a bathyal sedimentary environment. In the Liwan and Beijiao sags, the mounds between channels(sub) parallel to one another are 1.0–1.5 km and 1.5–2.0 km wide, 150–300 m and 150–200 m high, and extend straightly from west to east for 5–15 km and 8–20 km, respectively. Mounds and channels in the Liwan Sag are parallel with the regional slope. Mounds and channels in the Beijiao Sag, however, are at a small angle to the regional slope. According to internal geometry, texture and external morphology of mounds, the mounds in Beijiao Sag are divided into weak amplitude parallel reflections(mound type I), blank or chaotic reflections(mound type II), and internal mounded reflections(mound type Ⅲ). The mounds in Liwan Sag, however, have the sole type, i.e., mound type I. Mound type I originates from the incision of bottom currents and/or gravity flows. Mound type II results from gravity-driven sediments such as turbidite. Mound type Ⅲ is a result of deposition and incision of bottom currents simultaneously. The channels with high amplitude between mounds in the Beijiao and Liwan sags are a result of gravity-flow sediments and it is suggested they are filled by sandstone.Whereas channels with low-mediate amplitudes are filled by bottom-current sediments only in the Beijiao Sag,where they are dominantly composed of mudstone. This study provides new insights into the origins of the mounds and channels worldwide.  相似文献   

Geochemical evidence of an extraterrestrial component in impact melt breccia from the Paleoproterozoic Dhala impact structure,India          下载免费PDF全文

Jayanta Kumar Pati  Wen Jun Qu  Christian Koeberl  Wolf Uwe Reimold  Munmun Chakarvorty  Ralf Thomas Schmitt 《Meteoritics & planetary science》2017,52(4):722-736

The Paleoproterozoic Dhala structure with an estimated diameter of ~11 km is a confirmed complex impact structure located in the central Indian state of Madhya Pradesh in predominantly granitic basement (2.65 Ga), in the northwestern part of the Archean Bundelkhand craton. The target lithology is granitic in composition but includes a variety of meta‐supracrustal rock types. The impactites and target rocks are overlain by ~1.7 Ga sediments of the Dhala Group and the Vindhyan Supergroup. The area was cored in more than 70 locations and the subsurface lithology shows pseudotachylitic breccia, impact melt breccia, suevite, lithic breccias, and postimpact sediments. Despite extensive erosion, the Dhala structure is well preserved and displays nearly all the diagnostic microscopic shock metamorphic features. This study is aimed at identifying the presence of an impactor component in impact melt rock by analyzing the siderophile element concentrations and rhenium‐osmium isotopic compositions of four samples of impactites (three melt breccias and one lithic breccia) and two samples of target rock (a biotite granite and a mafic intrusive rock). The impact melt breccias are of granitic composition. In some samples, the siderophile elements and HREE enrichment observed are comparable to the target rock abundances. The Cr versus Ir concentrations indicate the probable admixture of approximately 0.3 wt.% of an extraterrestrial component to the impact melt breccia. The Re and Os abundances and the ¹⁸⁷Os/¹⁸⁸Os ratio of 0.133 of one melt breccia specimen confirm the presence of an extraterrestrial component, although the impactor type characterization still remains inconclusive.  相似文献   

折射/谐衍射红外双波段成像光谱仪系统研究     

刘英  孙强  卢振武  曲锋  吴宏圣  李淳 《海洋学报》2010,32(10):6980-6987

为了获取足够的目标信息,充分利用中波红外和长波红外的光谱信息,建立了谐衍射中、长波红外超光谱成像系统.利用谐衍射元件独特的色散特性,将谐衍射透镜应用于中、长波红外超光谱成像系统中,使系统在中波红外3.7—4.8 μm和长波红外8—12 μm的2个红外大气窗口内获取数百个光谱图像.设计结果表明,中波红外波段,在18对线/mm处光学系统的调制传递函数(MTF)大于0.55;长波红外波段,在13对线/mm处光学系统的MTF大于0.5;光学系统的衍射环绕能,在中波红外波段30 μm半径范围内大于85%,在长波红外  相似文献   

基于组合统计降尺度的华西南部地区冬季气温预测技术研究     

吴遥  唐红玉  董新宁  何慧根  郭渠  张驰 《气象科技》2022,50(4):526-535

利用1982—2017年华西南部地区冬季气温和NCEP再分析资料以及CFS模式实时预测资料,通过SVD诊断分析,选取影响华西南部地区冬季气温的同期关键区大气环流和前期海温及OLR因子场,建立预测与观测场相结合的组合统计降尺度预测模型。该统计降尺度预测模型对1982—2017年的回报结果显示：与观测场的空间相关系数较CFS模式原始预测结果有显著提高,多年均值从-0.06提升到0.38,最高可达0.85。同时,此降尺度预测模型可较好地回报出华西南区冬季气温的空间分布型。  相似文献   

锦州湾表层海水微塑料分布特征   总被引：2，自引：0，他引：2  

曲玲  张微微  王旭  郭洪发  陈元  李明浩  张守锋  赵骞  王菊英 《海洋学报》2021,43(2):98-104

海洋微塑料是全球关注的新兴环境问题,海湾由于特殊的地理环境特征,成为微塑料分布研究的热点区域.本研究以锦州湾为研究海域,于2017年10月布设了11个点位开展表层海水微塑料样品采集,在实验室采用湿式氧化法开展样品前处理,应用傅立叶变换显微红外光谱仪分析鉴定微塑料成分.研究结果表明,锦州湾表层水体微塑料平均丰度为(0.9...  相似文献   

CO2浓度增加背景下季风区大气辐射加热响应的差异          下载免费PDF全文

Xia Qu  Gang Huang  Xiaocong Wang 《大气和海洋科学快报》2021,14(3):19-24

大气CO2浓度增加,大气辐射平衡调整,将影响到大气的辐射加热,对季风环流的产生影响.CMIP6结果显示,大气CO2浓度增加,可减弱季风区主雨季对流层高,低层的辐射加热,加强对流层中层的辐射加热.各季风区加热响应的峰值层次不同:亚洲季风区平均层次最高(500-775 hPa),北非,南美,澳洲季风区次之(550-600 ...  相似文献   

基于3S技术的福建省湿地景观格局特征分析   总被引：1，自引：0，他引：1  

曾从盛  郑彩红  陈渠  欧世芬 《亚热带资源与环境学报》2007,2(4):24-32

利用福建省1986、1993、2000年的TM影像和2004年的中巴地球资源卫星影像,在RS、GPS和GIS技术支持下,结合福建省生态环境特征,选取了斑块面积指标、形状指标、破碎化程度指标、聚散性指标、多样性指标等5类景观生态学指数,研究福建省1986-2004年湿地景观格局演变规律.结果表明:(1)福建省湿地面积总体呈下降趋势.1986-2004年各期湿地总面积分别是:1793 793.06 hm2、1 665 966.28 hm2、1609 862.77 hm2、1618760.97 hm2.各景观面积指数表现出不同程度的变化,其中灌溉地、河流、河漫滩、沼泽、盐田景观面积呈现下降趋势,蓄水区、海水养殖景观面积增大,其他类型波动变化;(2)受人类活动的影响,景观优势组分对景观整体的控制作用有所减弱.Shannon-Wiener多样性指数4个时期分别为0.668 1、0.737 5、0.816 5、0.830 1,Shannon-Wiener均匀度指数分别0.3041、0.335 6、0.371 6、0.377 8,斑块面积变异系数由1986年的882.0695%下降到2004年的516.3157%;(3)湿地景观受外界干扰程度加大,破碎化程度加剧;同时,湿地原始形态也受到了较复杂的影响.边缘密度由1986年的5.9981m/hm2上升到2004年的6.6982m/hm2,平均形状指数也从2.1758略微下降到1.9910;(4)各斑块类型和周围相邻斑块类型的空间连接程度进一步降低,湿地景观被分隔态势增强.蔓延度指数下降,4个时期分别为83.3695、81.928 3、79.890 8、79.820 3,斑块结合度从1986年的99.202 9连续降至2004年的98.5459.  相似文献