A review of the seismicity and seismotectonics of Delhi and adjoining areas     

Rajesh Prakash  J. P. Shrivastava 《Journal of the Geological Society of India》2012,79(6):603-617

Understanding of seismicity and seismotectonics of Delhi and adjoining areas is essential as these areas lie in the seismic zone IV and are geologically confined to the Delhi Fold Belt (DFB), juxtaposed to the Himalayan Frontal Thrust Fold Belt. Owing to the set-up, seismicity in this area is ascribed to the Himalayan Thrust System and activation of DFB Fault Systems. Considerably improved instrumental seismic monitoring in this area and data analysis had resolved three regions of pronounced seismicity that lie close to Sonepat, Rohtak and western part of the NCT Delhi, attributed to activation of various portions of the fault systems of the DFB. Based on seismic telemetry network data, the seismicity pattern analysis revealed that the Mahendragarh Dehradun Sub-Surface Fault (MDSSF) and Delhi Sargodha Ridge (DSR) are the two major zones of structural importance for the nucleation of seismicity in this region. These revelations were corroborated with the fault plane solution of the earthquakes. The dominant mechanism in nucleation of seismicity in DFB is the thrust with minor strike slip. The seismicity and seismotectonics of Delhi and adjoining areas endemic to activation of DFB is reviewed and presented in this paper.  相似文献   

Experimental and petrological constraints on local-scale interaction of biotite-amphibole gneiss with H2O-CO2-（K, Na）Cl fluids at middle-crustal conditions： Example from the Limpopo Complex, South Africa   总被引：1，自引：1，他引：0  

Oleg G. Safonov  Elizaveta I. Kovaleva  Svetlana A. Kosova  H.M. Rajesh  Georgy A. Belyanin  Maria A. Golunova  Dirk D. Van Reenen 《地学前缘(英文版)》2012,3(6):829-841

Reaction textures and fluid inclusions in the～2.0 Ga pyroxene-bearing dehydration zones within the Sand River biotite-hornblende orthogneisses（Central Zone of the Limpopo Complex） suggest that the formation of these zones is a result of close interplay between dehydration process along ductile shear zones triggered by H₂O-CO₂-salt fluids at 750—800℃and 5.5—6.2 kbar.partial melting,and later exsolution of residual brine and H₂O-CO₂ fluids during melt crystallization at 650—700℃.These processes caused local variations of water and alkali activity in the fluids,resulting in various mineral assemblages within the dehydration zone.The petrological observations are substantiated by experiments on the interaction of the Sand River gneiss with the H₂O-CO-2-（K,Na）Cl fluids at 750 and 800℃and 5.5 kbar.It follows that the interaction of biotite-amphibole gneiss with H₂O-CO₂-（K.Na）Cl fluids is accompanied by partial melting at 750—800℃.Orthopyroxene-bearing assemblages are characteristic for temperature 800℃and are stable in equilibrium with fluids with low salt concentrations,while salt-rich fluids produce clinopyroxene-bearing assemblages.These observations arc in good agreement with the petrological data on the dehydration zones within the Sand River orthoeneisses.  相似文献   

Aqueous heavy metals removal by adsorption on β-diketone-functionalized styrene–divinylbenzene copolymeric resin     

Rajesh Kumar  S. K. Jain  R. K. Misra  M. Kachchwaha  P. K. Khatri 《International Journal of Environmental Science and Technology》2012,9(1):79-84

An investigation was undertaken regarding the adsorption of different heavy metal ions from aqueous solutions using ??-diketone-functionalized styrene divinylbenzene resin under different experimental conditions such as initial concentration of metal ions, contact time, pH, and chelating capacity. The functionalization of resin was carried out by the condensation reaction of sodium salt of ??-diketones (pentane-1,3-dione) and chloromethylated styrene?Cdivinylbenzene resin in dichloromethane. Functionalized resin beads were characterized by Fourier transform infrared spectroscopy. The batch method was employed using different metal ions solution from 5 to 15?mg/L at different contact times. The adsorption kinetics was tested for the pseudo-first order, pseudo-second order reaction at different experimental conditions. The rate constant of adsorption kinetic models were also calculated and good correlation coefficient (R ²?>?0.9941) was obtained for pseudo-second order kinetic model. The maximum adsorption value obtain for lead (0.725728?mg/g), chromium (0.9199?mg/g), nickel (0.4974?mg/g), cobalt (0.6196?mg/g) and cadmium (0.6519?mg/g) at equilibrium condition, which shows that ??-diketone-functionalized styrene divinylbenzene resin is an effective adsorbent for toxic metal ions.  相似文献   

Sound level produced during rock drilling vis-à-vis rock properties     

B. Rajesh Kumar  Harsha Vardhan  M. Govindaraj 《Engineering Geology》2011,(4):333

The process of drilling, in general, always produces sound. Though sound is used as a diagnostic tool in mechanical industry, its application in predicting rock property is not much explored. In this study, an attempt has been made to estimate rock properties such as uniaxial compressive strength, Schmidt rebound number and Young's modulus using sound level produced during rotary drilling. For this purpose, a computer numerical controlled vertical milling centre was used for drilling holes with drill bit diameters ranging from 6 to 20 mm with a shank length of 40 mm. Fourteen different rock types were tested. The study was carried out to develop the empirical relations using multiple regression analysis between sound level produced during drilling and rock properties considering the effects of drill bit diameter, drill bit speed and drill bit penetration rate. The F-test was used to check the validity of the developed models. The measured rock property values and the values calculated from the developed regression model are fairly close, indicating that the developed models could be efficiently used with acceptable accuracy in prediction of rock properties.  相似文献   

The ice sheet dynamics around Dakshin Gangotri glacier,Schirmacher Oasis,East Antarctica vis-à-vis topography and meteorological parameters     

Prakash Kumar Shrivastava  Rajesh Asthana  Sandip Kumar Roy 《Journal of the Geological Society of India》2011,78(2):117-123

Recession of the snout of Dakshin Gangotri glacier in the western part of Schirmacher Oasis, East Antarctica has been recorded over two decades. However, the rate of retreat is not uniform and varies at different locations. The ice wall forming the western flank of the glacier has shown an average retreat of 17.07 m between 2001 and 2009 while the snout had gone back by 6.94 m (average) during the same period. Before 2001, the snout had shown a complete recession of 3.13 m (average). The snout occupies valley area receiving less amount of solar radiation as compared to the western wall, which is a vertical cliff receiving maximum amount of solar radiation. The notable difference in the rate of recession in different parts of the Dakshin Gangotri glacier overriding Schirmacher Oasis can be attributed to combined effect of natural factors, including meteorological parameters, ice sheet dynamics and geomorphology of that area.  相似文献   

Treatment of poultry slaughterhouse wastewater in upflow anaerobic filter under low upflow velocity   总被引：2，自引：2，他引：0  

R. Rajakumar M.E.  Ph.D.  DIS.  T. Meenambal M.E.  Ph.D.  J. Rajesh Banu M.Sc.  Ph.D.  I. T. Yeom 《International Journal of Environmental Science and Technology》2011,8(1):149-158

The wastewater discharged by poultry slaughterhouse industries are characterized mainly by high biochemical oxygen demand, high suspended solids and complex mixture of fats, proteins and fibers requiring systematic treatment prior to disposal. In this study, the performance of an upflow anaerobic filter reactor for treating Indian poultry slaughterhouse wastewater under low upflow velocity of 1.38 m/day at mesophilic temperature (29-35 °C) was investigated. The reactor was inoculated with anaerobic non-granular sludge from an anaerobic reactor treating the poultry slaughterhouse wastewater. The reactor took 147 days for complete start-up with removal efficiencies of total chemical oxygen demand and soluble chemical oxygen demand of 70 and 79 % respectively. The maximum total chemical oxygen demand removal efficiency of 78 % was achieved at an organic loading rate of 10.05 kg/m³/day and at an hydraulic retention time of 12 h. The average methane content varied between 46 and 56 % and methane yield at maximum removal efficiency was 0.24 m³ CH₄/kg COD_removed·day. Sludge granules of 1–2 mm were observed in between the packing media. Scanning electron microscope analysis revealed that sludge granules are composed of clumps of Methanosarcina clustered with less intertwined Methanosaeta fibre of granules. The lower velocity used in this study has achieved better performance of the reactor by creating active microbial formation with stable pH upto an organic loading rate of 14.3 kg/m³/day. This has proved that the poultry slaughterhouse wastewater can be treated using anaerobic filter reactor under low upflow velocity.  相似文献   

News and notes     

R. Vaidyanadhan  M. S. Rao  R. H. Sawkar  Sandhya Misra  K. G. Misra  Dhruv Sen Singh 《Journal of the Geological Society of India》2013,82(3):301-304

  相似文献   

Geochemistry of Proterozoic granitoids exposed between Dirang and Tawang, western Arunachal Himalaya, north-eastern India: petrogenetic and tectonic significance     

Rajesh K. Srivastava 《International Journal of Earth Sciences》2013,102(7):2043-2060

Major and trace element geochemistry of Proterozoic granitoids from the Dirang and Galensiniak Formations, of Lesser and Higher Himalayas, respectively, emplaced in and around Dirang and Tawang regions of the western Arunachal Himalaya, is discussed. In general, these granitoids are massive as well as foliated in nature and are characterized by granitic mineralogical compositions. Porphyritic and hypidiomorphic textures are common in massive type, whereas others show porphyroblastic and foliated textures. Augen structure is also observed in a number of samples. Geochemical and normative compositions together with petrographic features classify them as peraluminous granitoids. Major and trace element geochemistry of most of these granitoids shows granitic nature, while few samples also show monzonitic characteristics. Observed geochemical characters, such as their peraluminous and alkali-calcic/calcic-alkalic nature, crudely defined geochemical patterns, different multi-element and rare-earth element patterns, together with low Mg# (Mg number) of these granitoids suggest their derivation from lower crustal material rather than a mantle source. Multi-element and rare-earth element patterns corroborate their genesis from different crustal melts. It is difficult to explain variations observed in granitoid rocks by partial melting alone; definitely different other processes like migration of melts, magma mixing, assimilation and fractional crystallization also played important role in the genesis of these granitoids. These melts were likely generated at low temperature (730–760 °C) and low pressure (2–5 GPa). The chemical compositions suggest that most of these Paleoproterozoic granitoids are emplaced within the syn-collisional tectonic setting, while few granitoid samples also indicate their volcanic-arc nature. Probably, later group of granitoids are slightly younger to the syn-collisional type.  相似文献   

Effects of sludge pretreatment on sludge reduction in a lab-scale anaerobic/anoxic/oxic system treating domestic wastewater   总被引：2，自引：2，他引：0  

D. K. Uan  I. T. Yeom  P. Arulazhagan  J. Rajesh Banu 《International Journal of Environmental Science and Technology》2013,10(3):495-502

Excess sludge disposal is one of the serious challenges in biological wastewater treatment. Reduction of sludge production would be an ideal way to solve sludge-associated problems rather than the post-treatment of the sludge produced. In this study, a new wastewater treatment process combining anaerobic/anoxic/oxic system with thermochemical sludge pretreatment was tested in a laboratory scale experiment. In this study, the effects of the sludge pretreatment on the excess sludge production in anaerobic/anoxic/oxic were investigated. The system was operated in two Runs (1 and 2). In Run 1, the system was operated as a reference and in Run 2, a part of the mixed liquid was pretreated thermochemically and was returned to the bioreactor. The average solubilization efficiency of pretreated sludge was found to be about 35 % during the study period of 220 days. Sludge production rate in Run 2 was less than that in Run 1 by about 52 %. Total phosphorous was removed by enhanced biological phosphorous removal with the removal efficiency of 83–87 % and 81–83 % for Run 1 and Run 2, respectively. Total nitrogen removal in Run 2 (79–82 %) was slightly higher than that in Run 1 (68–75 %). The mixed liquor suspended solids/mixed liquor volatile suspended solids ratio was identical after both runs in the range 78–83 %. The effluent water qualities were not significantly affected when operated with thermochemical pretreatment at pH 11 and 60 °C for 3 h during 7 months. From the present study it is concluded that thermochemical sludge pretreatment of anaerobic/anoxic/oxic process plays an important role in reduction of sludge production.  相似文献   

On the planar motion in the full two-body problem with inertial symmetry   总被引：1，自引：0，他引：1  

Pamela Woo  Arun K. Misra  Mehdi Keshmiri 《Celestial Mechanics and Dynamical Astronomy》2013,117(3):263-277

Relative motion of binary asteroids, modeled as the full two-body planar problem, is studied, taking into account the shape and mass distribution of the bodies. Using the Lagrangian approach, the equations governing the motion are derived. The resulting system of four equations is nonlinear and coupled. These equations are solved numerically. In the particular case where the bodies have inertial symmetry, these equations can be reduced to a single equation, with small nonlinearity. The method of multiple scales is used to obtain a first-order solution for the reduced nonlinear equation. The solution is shown to be sufficient when compared with the numerical solution. Numerical results are provided for different example cases, including truncated-cone-shaped and peanut-shaped bodies.  相似文献