Vertical distributions of nitrogen,phosphorus and iron in Beppu Bay     

Yukiho Yamaoka  Terumi Tanimoto  Takayuki Shiozawa 《Journal of Oceanography》1983,39(6):301-304

Beppu Bay is a shallow basin located at the western end of the Seto Inland Sea with a sill depth ofca. 40 m. The bottom water (belowca. 65 m in summer andca. 70 m in winter) was anoxic and contained high concentrations of hydrogen sulfide, phosphate and ammonium. Maximum concentrations of nitrate and nitrite appeared near the top of the thermocline, suggesting the occurrence of bacterial nitrification in this layer and of bacterial denitrification in the anoxic bottom water. Concentrations of particulate phosphorus and particulate iron were highest near the bottom of the thermocline. The distribution of phosphorus in this bay is probably controlled by a dissolution-diffusion-precipitation cycle of iron or its hydrous oxides.  相似文献   

Sedimentation rates and heavy metal pollution of sediments in the Seto Inland Sea     

Akira Hoshika  Takayuki Shiozawa 《Journal of Oceanography》1985,41(5):283-290

In the Suo-Nada area of the Seto Inland Sea, Japan, sedimentation rates and the sedimentary record of anthropogenic metal loads were determined by combining the Pb-210 dating technique with heavy metal analysis of the sediments. The sedimentation rates vary from 0.11 to 0.27 g cm^–2 yr^–1. Lower sedimentation rates were observed in the eastern part of the basin which is characterized by a bottom with sand and gravel, and fast tidal currents.Anthropogenic and natural loads of copper and zinc into the sediments are 34 and 326, and 65 and 375 ton yr^–1, respectively. The anthropogenic loads are fairly low compared with those of the other main areas of sediment accumulation in the Seto Inland Sea. The highest level of zinc and copper pollution was observed in the western part of the basin because of waste discharge from an old and big ironworks outside basin since the early 1900's.  相似文献   

Sedimentation rates and heavy metal pollution of sediments in the Seto Inland Sea     

Akira Hoshika  Takayuki Shiozawa 《Journal of Oceanography》1984,40(2):115-123

Sedimentation rates in ten sediment cores from Hiroshima Bay in the Seto Inland Sea of Japan were determined with the |2210|0Pb technique, and heavy metals were analyzed. The sedimentation rates vary from 0.18 to 0.33 g cm|2-2|0 yr|2-1|0. The highest sedimentation rates were observed in the northern part of the bay at the mouth of Ota River, while lower sedimentation rates not more than 0.20 g cm⁻² yr⁻¹ were observed at stations close to narrow water-ways, or where water depth was shallow. The contents of copper and zinc in the sediment cores began to increase around 1930 as a result of increased human activity, and have remained almost unchanged since 1970 possibly because of regulation of pollutant discharge. The natural background values of copper and zinc in the sediment of this bay range from 16 to 27 mgkg⁻¹ and 70 to 105 mg kg⁻¹, respectively. The total amounts of anthropogenic copper and zinc deposited in the sediments since about 1930 are estimated to be 0.5–2.7 ton km⁻² and 2.2–14.5 ton km⁻², respectively. At the present-day, the anthropogenic loads of copper and zinc to the sediments of the whole bay are 26 ton yr⁻¹ and 183 ton yr⁻¹, and these values constitute 39% and 48% of the total sedimentary loads at the present-day, respectively.  相似文献   

Heavy metals and accumulation rates of sediments in Osaka Bay,the Seto Inland Sea,Japan     

Akira Hoshika  Takayuki Shiozawa 《Journal of Oceanography》1986,42(1):39-52

The metal load into sediments and the change in the sedimentary environment of Osaka Bay in the Seto Inland Sea have been studied through geochemical analysis of core sediments, using both Pb-210 dating and a selective chemical leaching technique. Analytical results from a 6-m core of sediment show that copper and zinc pollution started in the late 1800's and the present enrichment ratios of copper and zinc, relative to background levels (20 mg kg^–1 for Cu and 94 mg kg^–1 for Zn), are 2.8 and 4.1, respectively. The present anthropogenic copper and zinc loads into Osaka Bay sediments, are 47 and 368 ton yr^–1, while natural copper and zinc loads are 40 and 186 ton yr^–1, respectively. Osaka Bay sediment at the present day is considered to be seriously polluted by zinc, now. The vertical profiles of copper and zinc in four successively separated fractions (10% acetic acid soluble fraction: F-HAC, 0.1M hydrochloric acid-soluble fraction: F-HCl, hydrogen peroxide-soluble fraction: F-H₂O₂ and hydrofluoric acid-soluble fraction: F-HF) from the core sediments indicate that enrichments of copper and zinc in the upper layer of the sediment are dependent on increases in the metal contents of the F-HAC, F-HCl and F-H₂O₂ fractions. Copper in F-HAC, and zinc in F-HAC and F-HCl, seem to be of anthropogenic origin.Results of sequential studies of the whole Seto Inland Sea can be summarized as follows: At the present time, the sedimentary loads of copper and zinc over the whole Seto Inland Sea area are 630 and 3,500 ton yr^–1, respectively, while the natural and anthropogenic loads are 320 and 310 ton yr^–1 for copper and 1,800 and 1,700 ton yr^–1 for zinc, respectively.  相似文献   

Origin of cyclicity in Triassic-Jurassic radiolarian bedded cherts of the Mino accretionary complex from Japan     

Rie S.  Hori Chang-Fee  Cho Hiroyuki  Umeda 《Island Arc》1993,2(3):170-180

Abstract The abundance of magnetic microspherules in a Triassic-Jurassic continuous sequence of alternating chert and shale beds in the Mino accretionary complex, central Japan, was measured systematically. Depending on time, the magnetic microspherules extracted from shale beds change in abundance considerably from the minimum 0.9ppm/cm³ at latest Triassic ( ca 208Ma) and the maximum 75ppm/cm³ at late Early Jurassic ( ca 187Ma); however, the abundance is always higher approximately 10–100 (average 70) times than those from adjacent chert bed at any stratigraphic horizon. Such systematic difference reveals the origin of radiolarian bedded chert as cyclic-rapid accumulation of biogenic SiO₂ under extremely slow accumulative environments of shale with probable aeolian dust in origin. The accumulation data for individual shale and chert beds were obtained based on the microspherule abundance and radiolarian biostratigraphy, i.e., ca 0.018g/cm²Ka for lower Jurassic shale beds and ca 1.9g/cm²Ka for adjacent chert beds.
Duration time to make a chert-shale couplet corresponds to a dominantly 15–20Ka interval (average 23 Ka) in Upper Triassic bedded cherts with a low paleolatitude, whereas a 40–45 Ka interval (average 42 Ka) in Lower Jurassic ones which may been formed in higher latitude than Triassics before the final accretion to the Asian continental margin. Depending on paleolatitude, the cyclicity of 23 and 42 Ka may correspond to Milankovitch cycles which have been well documented in deep-sea sediments.  相似文献   

Landsat infrared analysis of fumarole activity at Unzen Volcano: time-series comparison with gas and magma fluxes     

Takayuki Kaneko  Martin J. Wooster 《Journal of Volcanology and Geothermal Research》1999,89(1-4)

We analyse shortwave infrared thermal data of the phase 1 eruption of Unzen Volcano (Japan) extracted from eight nighttime Thematic Mapper (TM) images taken from the Landsat 5 satellite between October 1991 and November 1992. We identify two discrete regions of the dome that were heated to high temperature by the ongoing eruptive activity; a fumarolically heated region and an area associated with the effusion of new lava. We concentrate analysis on the fumarolically heated region and investigate the relationships between parameters derived from the infrared radiance data and the nature of the fumarolic gas and magma fluxes. Temporal variations in the parameters derived from the radiance data closely follow those observed in the measured rate of magma effusion. The positive correlation observed between the fumarolically driven shortwave infrared flux and the magma discharge rate (r²=0.64) indicates that degassing occurred efficiently and in proportion to the amount of magma supplied. Over our monitoring period, the data suggest that gas accumulation within the edifice did not occur, this conclusion agreeing with a previous finding obtained using correlation spectrometer (COSPEC) analysis of SO₂ flux rates. A positive correlation (r²=0.56) was also found between the mean radiance of the pixels in the fumarolically heated region and the overall size of that region. This suggests a potential mechanism whereby, when gas pressure within the edifice increased, excess gas escaped through additional pathways to the surface as well through an increased flux at the main fumarolic vents.  相似文献   

Modeling boulder transport by coastal waves on cliff topography: Case study at Hachijo Island,Japan     

Masashi Watanabe  Kazuhisa Goto  Fumihiko Imamura  Andrew Kennedy  Daisuke Sugawara  Norihiro Nakamura  Takayuki Tonosaki 《地球表面变化过程与地形》2019,44(15):2939-2956

Clifftop coastal boulders transported by storm waves or tsunamis have been reported around the world. Although numerical calculation of boulder transport is a strong tool for the identification of tsunami or storm boulders, and for estimation of the wave size emplacing boulders, models which can reasonably solve boulder transport from below a cliff or from a cliff-edge onto a cliff-top do not yet exist. In this study, we developed a new numerical formulation for cliff-top deposition of boulders from the cliff edge or below the cliff, with validation from laboratory tests. We then applied the model using storm and tsunami wave forcing to simulate the observed boulder deposits at the northwest coast of Hachijo Island, Japan. Using the model, the actual distribution of boulders was explained well using a reasonable storm wave height without assumption of anomalously high-water level by storm surge. Results show that boulder transport from the cliff edge or under the cliff onto the cliff-top was possible from a tsunami with periods of 5~10 min or storm waves with no storm surge. However, the actual distribution of boulders on the cliff was explained only by storm waves, but not by tsunami. Therefore, the boulders distributed at this site are likely of storm wave origin. Our developed model for the boulder transport calculation can be useful for identifying a boulder's origin and can reasonably calculate cliff-top deposition of boulders by tsunami and storm waves. © 2019 John Wiley & Sons, Ltd. © 2019 John Wiley & Sons, Ltd.  相似文献   

Alteration and mass transfer inferred from the Hirabayashi GSJ drill penetrating the Nojima Fault, Japan     

Koichiro Fujimoto  Hidemi Tanaka    Takayuki Higuchi  Naoto Tomida  Tomoyuki Ohtani  Hisao Ito 《Island Arc》2001,10(3-4):401-410

Abstract Mineralogical and geochemical studies on the fault rocks from the Nojima–Hirabayashi borehole, south-west Japan, are performed to clarify the alteration and mass transfer in the Nojima Fault Zone at shallow depths. A complete sequence from the hornblende–biotite granodiorite protolith to the fault core can be observed without serious disorganization by surface weathering. The parts deeper than 426.2 m are in the fault zone where rocks have suffered fault-related deformation and alteration. Characteristic alteration minerals in the fault zone are smectite, zeolites (laumontite, stilbite), and carbonate minerals (calcite and siderite). It is inferred that laumontite veins formed at temperatures higher than approximately 100°C during the fault activity. A reverse component in the movement of the Nojima Fault influences the distribution of zeolites. Zeolite is the main sealing mineral in relatively deep parts, whereas carbonate is the main sealing mineral at shallower depths. Several shear zones are recognized in the fault zone. Intense alteration is localized in the gouge zones. Rock chemistry changes in a different manner between different shear zones in the fault zone. The main shear zone (MSZ), which corresponds to the core of the Nojima Fault, shows increased concentration of most elements except Si, Al, Na, and K. However, a lower shear zone (LSZ-2), which is characterized by intense alteration rather than cataclastic deformation, shows a decreased concentration of most elements including Ti and Zr. A simple volume change analysis based on Ti and Zr immobility, commonly used to examine the changes in fault rock chemistry, cannot account fully for the different behaviors of Ti and Zr among the two gouge zones.  相似文献   

Behavior of manganese in aqua-benthic environment in the Hiro Bay     

Shizuko Hirata  Osamu Takimura  Takayuki Shiozawa 《Journal of Oceanography》1978,34(6):237-241

The horizontal and vertical distributions of manganese in sea water, interstitial water and sediments in the Hiro Bay, Seto Inland Sea, Japan, have been investigated. The outflow from a pulp mill is the primary source of manganese in this bay. The industrial waste water contained 0.19 mg l^–1 of manganese, mostly in a dissolved form. This manganese diffused out both horizontally and vertically into the surrounding sea water. The content of manganese in the liquid and solid phases in the sediments, however, are inverse with that in the sea water; namely the lowest concentration of manganese in the sediments was observed at the station near the outfall and manganese concentration increased with the distance from the outfall.  相似文献   

Coastal polynyas off East Queen Maud Land observed from NOAA AVHRR data     

Takayuki Ishikawa  Jinro Ukita  Kay I. Ohshima  Masaaki Wakatsuchi  Takashi Yamanouchi  Nobuo Ono 《Journal of Oceanography》1996,52(3):389-398

Coastal polynyas off East Queen Maud Land in Antarctica are examined using NOAA AVHRR infrared data. From image analyses, two locations of coastal polynyas in this region are identified; one in Breid Bay and the other along the shelf break. The areal coverage of the Breid Bay polynya is significantly related to the strength of katabatic winds, which maintain their strength over the coastal sea due to land topography favoring for their confluence, thereby being capable of removing newly formed ice. Land fast ice in the eastern part of the bay also plays an additional role in the formation mechanism. It is also found that the areal coverage of coastal polynyas in this region fluctuate coherently. Moreover, these fluctuations correspond to the synoptic index, which measures the strength of the offshore wind, with their peaks closely associated with the areal peaks. These facts strongly suggest the influence of synoptic scale weather on the formation and maintenance of polynyas in this region.  相似文献