Study on Holocene Paleoearthquakes in Xizhang Trench on the Jiaocheng Fault Zone,Shanxi Province     

Xie Xinsheng  Zhao Jinquan  Jiang Wali  An Weiping  Li Zihong  Zhang Dawei  Cheng Xinyuan  Gao Shuyi  Wang Chunhe  Sun Changbin  Yan Chengguo 《中国地震研究》2008,22(4):428-439

Xizhang trench is located 10 km northwest of Taiyuan city, Shanxi Province, in front of a NNW-trending scarp of 4.6m height on the northern segment of the Jiaocheng fault zone. The dimensions of the trench are 108m in length, 8m in width, and 10m in depth. There are 18 horizons revealed in the trench. The upper strata are sandy loam; the upper strata of the downthrown block of the fault are gravels, the lower ones are an interbed of brown loam and sandy loam. The strata on the upthrown block of the fault are sandy loam containing gravel. The trench shows 3 fault planes, and the upper offset point on the fault plane is 1.5m below the ground surface, the newest dislocated stratum is （3.74±0.06） ka BP. The trench reveals a lot of deformation traces, such as fault planes, dislocated strata, colluvial wedges and formation tilting. The relationship between strata and faults in the trench shows that 3 paleoearthquake events have occurred at the Jiaocheng fault zone since the Early Holocene, they are about （3.74±0.06）- （3.06±0.26）ka BP, （8.35±0.09）ka- （3.74±0.06）ka BP, and（ 10.66±0.85） - （8.35±0.09）ka BP. The average interval among the events is 2.6 - 3.6ka. The minimum coseismic vertical displacements of the 3 events are 3.0m, 2.5m and 3.2m, respectively. The significance of Xizhang trench is that the Jiaocheng fault used to be active thousands of years ago, though there is no M ≥ 7.0 earthquake recorded in historical documents. Evidence of new Jiaocheng fault zone activity during the Holocene is important for the earthquake safety assessment of Taiynan city in the future.  相似文献   

松辽盆地北部深层砂岩成岩作用与孔隙演化   总被引：14，自引：2，他引：12  

邵红梅  刘招君  王成  冯子辉  洪淑新 《世界地质》2005,24(1):58-62

松辽盆地北部深层砂岩成岩作用强,原生孔隙保存差。深层砂岩只有出现大量的次生孔隙,才能具有较好的储集性能。本文通过偏光显微镜、扫描电镜和显微热台等分析方法,研究了松辽盆地深层砂岩岩石类型,成岩作用特征和各成岩阶段砂岩孔隙的演化,表明胶结作用是影响深层砂岩储层物性变差的主要原因,浊沸石胶结物的溶解是深部砂岩储集性能得以改善的主要原因。  相似文献   

盐源—宁蒗地区早泥盆世古地理特征及油气潜力分析          下载免费PDF全文

邓敏  程锦翔  王正和  余谦  张海全  张娣  陆俊泽 《沉积与特提斯地质》2020,40(4):25-35

为了探索康滇地轴以西地质条件复杂地区的油气资源潜力,通过面积性地质调查工作与钻孔资料、分析测试资料结合,对盐源—宁蒗地区下泥盆统黑色页岩开展综合研究。研究表明：盐源—宁蒗地区早泥盆世古地理主要受康滇古陆及古特提斯构造域的构造活动控制,靠近金-箐断裂地区发育滨岸-潮坪相,古隆起围限区出现局限海湾相,远离隆起的西北部地区发育台地、陆棚、盆地相;大瓜坪组（早泥盆世晚期）发育黑色页岩（局部地区发育硅质泥岩）,在羊排喜—岩口一带分布较为稳定、厚度大（20～100m）,普遍含钙质,有机碳含量较高,具较高的脆性矿物含量,热演化程度适中,是重要的烃源岩和页岩气富集有利层位;黑色页岩主要发育在局限海湾环境中,羊排喜—岩口—茅坪子一线是盐源—宁蒗地区黑色页岩富集区。  相似文献   

岩石膨胀性试验注意事项探讨     

刘军  谷莉  郭程  卓慧英 《岩土工程技术》2020,(2):117-121

从室内试验的角度来探讨几类工程勘察中岩石常用膨胀性试验(自由膨胀率、膨胀力、侧向约束膨胀率、耐崩解)的注意事项,从野外取样、标准样品制取、试验操作、方法选择等方面进行了论述,力求减小试验误差,提高膨胀岩的试验水平,保证试验结果的准确性,并使膨胀岩膨胀性指标的测定方法更臻完善。  相似文献   

鄂尔多斯盆地正宁地区三叠系延长组长9油层组成岩作用^*          下载免费PDF全文

沈默  朱筱敏  李程善  张文选  程逸凡  江梦雅 《古地理学报》2020,22(3):539-554

综合利用岩心、铸体薄片、扫描电镜等多种资料,对鄂尔多斯盆地正宁地区三叠系延长组长9油层组储集层的岩石类型、成岩作用类型、成岩相分布特征及主控因素进行了系统研究。延长组长9油层组储集层的岩石类型为细—中粒岩屑质长石砂岩和长石质岩屑砂岩,成岩作用类型主要为压实作用,同时还有绿泥石、方解石、铁方解石及硅质胶结作用,方解石交代作用和少量的溶蚀作用,储集层目前处于中成岩A期。根据层理频率和塑性颗粒含量将岩石划分为高频层理富片状塑性颗粒粉—细砂岩岩石相和低频层理富刚性矿物细—中砂岩岩石相,前者分布于水下分流河道边部,发育压实致密成岩相;后者形成于水下分流河道主河道和河口坝。根据砂体结构可划分为厚层单砂体和厚层多砂体。厚层单砂体为单期形成的河道或河口坝砂体,上部以方解石充填胶结成岩相为特征,下部以绿泥石衬边胶结成岩相为特征;厚层多砂体为多期砂体冲刷叠置形成,发育方解石绿泥石充填胶结成岩相。塑性颗粒含量对压实作用强度影响最大,叠加碳酸盐胶结致使储集层质量变差,而早期绿泥石环边胶结抑制压实作用,是有利储集层发育的重要条件。综合评价表明,延长组长9油层组有利储集层发育于绿泥石衬边胶结相,其次为绿泥石和方解石充填胶结相,最差储集层为方解石充填胶结相和压实致密相。  相似文献   

1988-2018年滇池氮磷比的时空演变特征与原因解析     

高伟  程国微  严长安  陈岩 《湖泊科学》2021,33(1):64-73

氮、磷浓度是制约湖泊营养状态和生产力水平的重要环境因子,而氮磷化学计量比是湖泊生态系统的主要指标,因此,判识氮磷比变化趋势及其驱动力对湖泊生态恢复具有重要意义.研究基于19882018年连续观测数据,分析了滇池氮磷浓度和氮磷摩尔比(简称氮磷比)的时空分布演变特征;采用多元线性回归模型分别对滇池草海和外海氮磷比驱动效应进行定量解析,筛选出影响湖体氮磷比变化的潜在驱动因子.结果表明:①19882018年滇池氮磷比呈现显著的线性上升趋势,其中草海和外海氮磷比分别上升1.3和0.7 a^-1.②草海和外海分别在2008年和2004年发生了氮磷比上升突变,突变前上升归因于总氮浓度快速增加,突变后则是由于总磷浓度下降较快.③滇池的氮磷浓度变化主要是受流域氮磷输入负荷、跨流域调水、流域氮磷削减、风速和水位的综合影响,但受控因子在不同区域可能存在差异.④气温是滇池氮磷比变化的主要驱动因子,流域人为氮磷输入差异是滇池氮磷比变化的次要驱动因子.  相似文献   

Scattering pattern analysis and true-amplitude generalized Radon transform migration for acoustic transversely isotropic media with a vertical axis of symmetry     

Quan Liang  Wei Ouyang  Weijian Mao  Shijun Cheng 《Geophysical Prospecting》2020,68(4):1211-1227

In multi-parameter ray-based anisotropic migration/inversion, it is essential that we have an understanding of the scattering mechanism corresponding to parameter perturbations. Because the complex nonlinearity in the anisotropic inversion problem is intractable, the construction of true-amplitude linearized migration/inversion procedures is needed and important. By using the acoustic medium assumption for transversely isotropic media with a vertical axis of symmetry and representing the anisotropy with P-wave normal moveout velocity, Thomsen parameter δ and anelliptic parameter η, we formalize the linearized inverse scattering problem for three-dimensional pseudo-acoustic equations. Deploying the single-scattering approximation and an elliptically anisotropic background introduces a new linear integral operator that connects the discontinuous perturbation parameters with the multi-shot/multi-offset P-wave scattered data. We further apply the high-frequency asymptotic Green's function and its derivatives to the integral operator, and then the scattering pattern of each perturbation parameter can be explicitly presented. By naturally establishing a connection to generalized Radon transform, the pseudo-inverse of the integral operator can be solved by the generalized Radon transform inversion. In consideration of the structure of this pseudo-inverse operator, the computational implementation is done pointwise by shooting a fan of rays from the target imaging area towards the acquisition system. Results from two-dimensional numerical tests show amplitude-preserving images with high quality.  相似文献   

A high accurate automated first-break picking method for seismic records from high-density acquisition in areas with a complex surface     

Yinpo Xu  Cheng Yin  Xuefeng Zou  Yudong Ni  Yingjie Pan  Liangjun Xu 《Geophysical Prospecting》2020,68(4):1228-1252

As the application of high-density high-efficiency acquisition technology becomes more and more wide, the areas with complex surface conditions gradually become target exploration areas, and the first-break picking work of massive low signal-to-noise ratio data is a big challenge. The traditional method spends a lot of manpower and time to interactively pick first breaks, a large amount of interactive work affects the accuracy and efficiency of picking. In order to overcome the shortcoming that traditional methods have weak anti-noise to low signal-to-noise ratio primary wave, this paper proposes a high accurate automated first-break picking method for low signal-to-noise ratio primary wave from high-density acquisition in areas with a complex surface. Firstly, this method determines first-break time window using multi-azimuth spatial interpolation technology; then it uses the improved clustering algorithm to initially pick first breaks and then perform multi-angle comprehensive quality evaluation to first breaks according to the following sequence: ‘single trace → spread → single shot → multiple shots’ to identify the abnormal first breaks; finally it determines the optimal path through the constructed evaluation function and using the ant colony algorithm to correct abnormal first breaks. Multi-azimuth time window spatial interpolation technology provides the base for accurately picking first-break time; the clustering algorithm can effectively improve the picking accuracy rate of low signal-to-noise ratio primary waves; the multi-angle comprehensive quality evaluation can accurately and effectively eliminate abnormal first breaks; the ant colony algorithm can effectively improve the correction quality of low signal-to-noise ratio abnormal first breaks. By example analysis and comparing with the commonly used Akaike Information Criterion method, the automated first-break picking theory and technology studied in this paper has high picking accuracy and the ability to stably process low signal-to-noise ratio seismic data, has a significant effect on seismic records from high-density acquisition in areas with a complex surface and can meet the requirements of accuracy and efficiency for massive data near-surface modelling and statics calculation.  相似文献   

Loading protocols for experimental seismic qualification of members in conventional and emerging steel frames     

Cheng Fang  Yiwei Ping  Yiyi Chen 《地震工程与结构动力学》2020,49(2):155-174

Quasi-static testing is one of the most commonly used experimental methods for examining the seismic performance of structural members. However, consistent loading protocols for experimental seismic qualification of members in emerging steel frames such as self-centering braced frames (SCBFs) as well as in some conventional ones including buckling-restrained braced frames (BRBFs) are still lacking. This paper aims to propose standardized loading protocols based on time-history dynamic analysis on a series of prototype building frames, including steel SCBFs, BRBFs, and moment-resisting frames (MRFs), where both far-field and near-fault earthquakes are considered. The methodology for the development of the loading protocols involves ground motion selection and scaling, design and analysis of prototype buildings, analysis results processing, and rainflow cycle counting, together with extra justification steps. The proposed loading protocols are consistently derived based on the MCE-level seismic hazard and 84^th percentile values of key seismic demand parameters. These parameters are number of damaging cycles N_t, maximum inter-story drift θ_max, inter-story drift range Δθ_i, sum of inter-story drift range ΣΔθ_i, and residual inter-story drift θ_r. The analysis confirms the variations in these seismic demands imposed on the different structural systems under different types of ground motions, highlighting the necessity of developing separate loading protocols for the different cases. The assumptions, decisions, and judgments made during the development of the loading protocols are elaborated, and the conditions and restrictions are outlined. The rationality of the proposed loading protocols is further justified through demonstrating the cumulative distribution function and energy dissipation demand of the systems.  相似文献   

利用Himawari-8高频次监测太湖蓝藻水华动态     

王萌  郑伟  刘诚 《湖泊科学》2017,29(5):1043-1053

新一代静止气象卫星Himawari-8以其10 min/次的高观测频次,为连续动态监测蓝藻水华提供了有力的数据支持.基于太湖实地光谱测量资料,提出Himawari-8卫星资料太湖蓝藻水华动态监测方法.以2015年10月2日蓝藻水华发生过程为例,利用连续、多时次Himawari-8资料,动态监测了太湖蓝藻水华的发展变化,分析蓝藻水华的出现、发展和消失,计算蓝藻水华强度的动态变化,认识蓝藻水华程度及变化特征,估算蓝藻水华的动态变化速度.上述分析为研究蓝藻水华的生长消亡过程提供了支持.进一步探讨蓝藻水华动态变化与气象要素的关系,发现在相同的温湿条件下,风场对蓝藻水华的形成、运动和消失有直接的驱动作用.  相似文献