Rôle de la déformation métamorphique dans la cristallinité du graphite : l'exemple des schistes graphiteux de la vallée de la Lotru (Carpathes,Roumanie)Role of metamorphic strain in the cristallinity of graphite: the example of the graphitic schists from the Lotru valley (Carpathians,Romania)     

Sorin-Constantin Barzoi  Bernard Guy 《Comptes Rendus Geoscience》2002,334(2):89-95

The study of the schists from Lotru valley (Carpathians mountains, Romania) shows the role of stress in graphite crystallinity. The carbonaceous material was separated and studied by X-ray diffraction and Raman microspectrometry. There exists a clear contrast between the crystallization degree of graphite found in the quartz–muscovite schists (good) and that found in the quartzites (poor). This observation is in conformity with a clear differentiation of fabric. The graphite suffered an anisotropic deformation in the graphitic schists, whereas it was protected from deformation by quartz in the quartzites. In this last case, the development of graphite from the organic material took place with a volume decrease, protected by the surrounding quartz. To cite this article: S.-C. Barzoi, B. Guy, C. R. Geoscience 334 (2002) 89–95.  相似文献   

Atmospheric Turbulence Decay During the Solar Total Eclipse of 11 August 1999     

Domenico Anfossi  Guy Schayes  Gervasio Degrazia  Antonio Goulart 《Boundary-Layer Meteorology》2004,111(2):301-311

The studies of turbulence decay were based in the past on measurements carried out in neutrally stratified wind tunnels and, more recently, on large-eddy simulation runs. Here the atmospheric turbulence decay process during the solar total eclipse of 11 August 1999 is examined. Thus a rapid transition from convective boundary-layer turbulence to that of a neutral or slightly stable one is considered. A u-v-w propeller anemometer and a fast response temperature sensor located in northern France on top of a 9-m mast recorded the turbulence observations. The measurements, in terms of turbulent kinetic energy decay with time, were found to be in good agreement with those prescribed by a theoretical model of turbulence decay recently proposed. In particular, it was found that the exponent of the power law describing the decay process has the value -2.  相似文献   

Sealing efficiency of shales   总被引：2，自引：0，他引：2  

Xiaorong Luo  Guy Vasseur 《地学学报》1997,9(2):71-74

The sealing efficiency of shale layers is studied through the hydraulic parameters which are required for sustaining overpressure during geologically significant periods. Assuming a 1D sedimentary complex composed of a sealing layer overlying a permeable one, we give approximate solutions for the dissipation of a given initial overpressure. The time constant for relaxation involves the thickness, hydraulic conductivity and specific storage of the seal and also those of the permeable layer. The values of the various hydraulic parameters are discussed. It is argued first that the specific storage corresponding to plastic deformation during burial compaction is larger than the one which would correspond to elastic deformation. When taking into account (i) plausible values for specific storage of the upper shale layer and (ii) the storage effect of the lower permeable layer, it is found that a shale layer of several tens of m with an hydraulic conductivity of the order of 10^-15 ms^-1 maintains overpressure for 1 Myr. For such hydraulic parameter values, in the absence of on-going pressuring forces, initial overpressures would decay with a time constant (corresponding to a decrease by a factor e ～, 2.7) of 1 Myr. This is interpreted as supporting a dynamic origin for observed abnormal pressures.  相似文献   

The effect of fault-bend folding on seismic velocity in the marginal ridge of accretionary prisms     

Yongen Cai  Chi-yuen Wang  Win-tsuang Hwang  Guy R. Cochrane 《Pure and Applied Geophysics》1995,145(3-4):637-646

Fluid venting in accretionary prisms, which feeds chemosynthetic biological communities, occurs mostly on the marginal thrust ridge. New seismic data for the marginal ridge of the Cascadia prism show significantly lower velocity than that in the adjacent oceanic basin and place important constraints on the interpretations of why fluid venting occurs mostly on the marginal ridge. We employed a finite-element method to analyze a typical fault-bend folding model to explain the phenomenon. The fault in the model is simulated by contact elements. The elements are characterized not only by finite sliding along a slide line, but also by elastoplastic deformation.We present the results of a stress analysis which show that the marginal ridge is under subhorizontal extension and the frontal thrust is under compression. This state of stress favors the growth of tensile cracks in the marginal ridge, facilitates fluid flow and reduces seismic velocities therein; on the other hand, it may close fluid pathways along the frontal thrust and divert fluid flow to the marginal ridge.On leave from Peking University, Beijing, 100871, China  相似文献   

The Japan Trench and its juncture with the Kuril Trench: cruise results of the Kaiko project, Leg 3     

Jean-Paul Cadet  Kazuo Kobayashi  Jean Aubouin  Jacques Boulgue  Christine Deplus  Jacques Dubois  Roland von Huene  Laurent Jolivet  Toshihiko Kanazawa  Junzo Kasahara  Kinichiro Koizumi  Serge Lallemand  Yasuo Nakamura  Guy Pautot  Kiyoshi Suyehiro  Shin Tani  Hidekazu Tokuyama  Toshitsugu Yamazaki 《Earth and Planetary Science Letters》1987,83(1-4)

This paper presents the results of a detailed survey combining Seabeam mapping, gravity and geomagnetic measurements as well as single-channel seismic reflection observations in the Japan Trench and the juncture with the Kuril Trench during the French-Japanese Kaiko project (northern sector of the Leg 3) on the R/V “Jean Charcot”. The main data acquired during the cruise, such as the Seabeam maps, magnetic anomalies pattern, and preliminary interpretations are discussed. These new data cover an area of 18,000 km² and provide for the first time a detailed three-dimensional image of the Japan Trench. Combined with the previous results, the data indicate new structural interpretations. A comparative study of Seabeam morphology, single-channel and reprocessed multichannel records lead to the conclusion that along the northern Japan Trench there is little evidence of accretion but, instead, a tectonic erosion of the overriding plate. The tectonic pattern on the oceanic side of the trench is controlled by the creation of new normal faults parallel to the Japan Trench axis, which is a direct consequence of the downward flexure of the Pacific plate. In addition to these new faults, ancient normal faults trending parallel to the N65° oceanic magnetic anomalies and oblique to the Japan trench axis are reactivated, so that two directions of normal faulting are observed seaward of the Japan Trench. Only one direction of faulting is observed seaward of the Kuril Trench because of the parallelism between the trench axis and the magnetic anomalies. The convergent front of the Kuril Trench is offset left-laterally by 20 km relative to those of the Japan Trench. This transform fault and the lower slope of the southernmost Kuril Trench are represented by very steep scarps more than 2 km high. Slightly south of the juncture, the Erimo Seamount riding on the Pacific plate, is now entering the subduction zone. It has been preceded by at least another seamount as revealed by magnetic anomalies across the landward slope of the trench. Deeper future studies will be necessary to discriminate between the two following hypothesis about the origin of the curvature between both trenches: Is it due to the collision of an already subducted chain of seamounts? or does it correspond to one of the failure lines of the America/Eurasia plate boundary?  相似文献   

The Direct Shear Strength and Dilatancy of Sand–gravel Mixtures     

Alessandro Simoni  Guy T. Houlsby 《Geotechnical and Geological Engineering》2006,24(3):523-549

A total of 87 direct shear tests in a large direct shear-box apparatus have been used to investigate the strength and dilatancy of sand–gravel mixtures. This paper focuses on the differences in behaviour between a silica sand (yellow Leighton Buzzard sand) and sand–gravel mixtures obtained by adding fractions of two kinds of gravel to the sand. The purpose is to find a relation between the grain-size characteristics of the materials and the shearing resistance. Experimental results are analysed in terms of the frictional and dilatant contributions to the strength of mixtures as a function of their relative density, and are compared with dilatancy theories and empirical equations. The addition of gravel to the mixtures, even at low fractions (less than 0.1 by volume), causes an increase in peak friction angle (Φ ′_peak) which results both from higher dilatancy at failure (ψ_max) and higher constant volume friction angle (Φ ′_cv). Use of the minimum voids ratio (e_min) of the materials allows the data for the two families of mixtures to be normalized and interpreted in terms of Φ ′_cv and the ratio (Φ ′_peak − Φ ′_cv)/ψ_max. The relationships between relative density (D_r), ψ_max and Φ ′_peak − Φ ′_cv are only partly explained on a physical basis, so we develop empirical equations to predict the peak shear resistance of sand–gravel mixtures (up to gravel contents of 0.5) on the basis of easily measurable quantities. Such equations constitute a practical tool to overcome the problems arising from the impracticality of testing coarse material in the standard shear-box apparatus.  相似文献   

Oxygen isotope compositions of chondrules in CR chondrites     

Alexander N. Krot  Guy Libourel  Marc Chaussidon 《Geochimica et cosmochimica acta》2006,70(3):767-779

We report in situ ion microprobe analyses of oxygen isotopic compositions of olivine, low-Ca pyroxene, high-Ca pyroxene, anorthitic plagioclase, glassy mesostasis, and spinel in five aluminum-rich chondrules and nine ferromagnesian chondrules from the CR carbonaceous chondrites EET92042, GRA95229, and MAC87320. Ferromagnesian chondrules are isotopically homogeneous within ±2‰ in Δ¹⁷O; the interchondrule variations in Δ¹⁷O range from 0 to −5‰. Small oxygen isotopic heterogeneities found in two ferromagnesian chondrules are due to the presence of relict olivine grains. In contrast, two out of five aluminum-rich chondrules are isotopically heterogeneous with Δ¹⁷O values ranging from −6 to −15‰ and from −2 to −11‰, respectively. This isotopic heterogeneity is due to the presence of ¹⁶O-enriched spinel and anorthite (Δ¹⁷O = −10 to −15‰), which are relict phases of Ca,Al-rich inclusions (CAIs) incorporated into chondrule precursors and incompletely melted during chondrule formation. These observations and the high abundance of relict CAIs in the aluminum-rich chondrules suggest a close genetic relationship between these objects: aluminum-rich chondrules formed by melting of spinel-anorthite-pyroxene CAIs mixed with ferromagnesian precursors compositionally similar to magnesium-rich (Type I) chondrules. The aluminum-rich chondrules without relict CAIs have oxygen isotopic compositions (Δ¹⁷O = −2 to −8‰) similar to those of ferromagnesian chondrules. In contrast to the aluminum-rich chondrules from ordinary chondrites, those from CRs plot on a three-oxygen isotope diagram along the carbonaceous chondrite anhydrous mineral line and form a continuum with amoeboid olivine aggregates and CAIs from CRs. We conclude that oxygen isotope compositions of chondrules resulted from two processes: homogenization of isotopically heterogeneous materials during chondrule melting and oxygen isotopic exchange between chondrule melt and ¹⁶O-poor nebular gas.  相似文献   

Cretaceous seamounts along the continent-ocean transition of the Iberian margin: U-Pb ages and Pb-Sr-Hf isotopes     

Renaud Merle  Urs Schärer  Guy Cornen 《Geochimica et cosmochimica acta》2006,70(19):4950-4976

To elucidate the age and origin of seamounts in the eastern North Atlantic, 54 titanite and 10 zircon fractions were dated by the U-Pb chronometer, and initial Pb, Sr, and Hf isotope ratios were measured in feldspars and zircon, respectively. Rocks analyzed are essentially trachy-andesites and trachytes dredged during the “Tore Madeira” cruise of the Atalante in 2001. The ages reveal different pulses of alkaline magmatism occurring at 104.4 ± 1.4 (2σ) Ma and 102.8 ± 0.7 Ma on the Sponge Bob seamount, at 96.3 ± 1.0 Ma on Ashton seamount, at 92.3 ± 3.8 Ma on the Gago Coutinho seamount, at 89.3 ± 2.3 Ma and 86.5 ± 3.4 Ma on the Jo Sister volcanic complex, and at 88.3 ± 3.3 Ma, 88.2 ± 3.9, and 80.5 ± 0.9 Ma on the Tore locality. No space-time correlation is observed for alkaline volcanism in the northern section of the Tore-Madeira Rise, which occurred 20-30 m.y. after opening of the eastern North Atlantic. Initial isotope signatures are: 19.139-19.620 for ²⁰⁶Pb/²⁰⁴Pb, 15.544-15.828 for ²⁰⁷Pb/²⁰⁴Pb, 38.750-39.936 for ²⁰⁸Pb/²⁰⁴Pb, 0.70231-0.70340 for ⁸⁷Sr/⁸⁶Sr, and +6.9 to +12.9 for initial epsilon Hf. These signatures are different from Atlantic MORB, the Madeira Archipelago and the Azores, but they lie in the field of worldwide OIB. The Cretaceous seamounts therefore seem to be generated by melts from a OIB-type source that interact with continental lithospheric mantle lying formerly beneath Iberia and presently within the ocean-continent transition zone. Inheritance in zircon and high ²⁰⁷Pb of initial Pb substantiate the presence of very minor amounts of continental material in the lithospheric mantle. A long-lived thermal anomaly is the most plausible explanation for alkaline magmatism since 104 Ma and it could well be that the same anomaly is still the driving force for tertiary and quaternary alkaline magmatism in the eastern North Atlantic region. This hypothesis is agreement with the plate-tectonic position of the region since Cretaceous time, including an about 30° anti-clockwise rotation of Iberia.  相似文献   

The selective flotation of enargite from other copper minerals — a single mineral study in relation to beneficiation of the Tampakan deposit in the Philippines     

G.D. Senior  P.J. Guy  W.J. Bruckard 《International Journal of Mineral Processing》2006

The floatability of enargite (3Cu₂S.As₂S₅) has been determined as a function of pulp potential to establish whether the flotation behaviour of the mineral differs sufficiently from that of other copper minerals thus offering the prospect of rejecting arsenic from the Tampakan ore by potential control during flotation.  相似文献   

River spacing and drainage network growth in widening mountain ranges     

Sébastien Castelltort  Guy Simpson 《Basin Research》2006,18(3):267-276

Drainage networks in linear mountain ranges always display a particular geometrical organisation whereby the spacing between the major drainage basins is on average equal to half the mountain width (distance from the mountain front to the main drainage divide), independent of climate and tectonics. This relationship is valid for mountains having different widths and is thus usually thought to be maintained by drainage reorganisation during mountain belt widening. However, such large‐scale systematic drainage reorganisation has never been evidenced. In this paper, we suggest an alternative explanation, namely that the observed drainage basin relationships are an inherent property of dendritic river networks and that these relationships are established on the undissected, lowland margins outside mountain ranges and are progressively incorporated and quenched into uplifted topography during range widening. Thus, we suggest that the large‐scale geometry of drainage networks in mountain ranges is mainly antecedent to erosion. We propose a model in which the large‐scale drainage geometry is controlled mainly by the geometrical properties of the undissected surfaces (in particular, the ratio of the regional slope to the local slope related to roughness) over which rivers are flowing before uplift, and is therefore independent of climate and tectonics.  相似文献