Reconstruction of ancient sea conditions with an example from the Swiss Molasse     

Philip A Allen 《Marine Geology》1984,60(1-4):455-473

Ancient sea conditions can be estimated from the grain size, spacing and steepness of preserved ripple-marks. The element of greatest uncertainty in such reconstructions is the relationship between near-bed orbital diameter of water particles and the ripple spacing. This relationship is simple for vortex ripples of high steepness but is problematical for the low-steepness forms known as post-vortex, rolling-grain or anorbital ripples.

The existence field for wave ripples is between the threshold velocity for sediment movement and the onset of sheet flow, most low-steepness forms occurring close to the bed planation threshold. A range of maximum period of formative waves can be obtained using combinations of orbital diameter and orbital velocity, assuming linear wave theory to be a reasonable approximation.

Probable wave heights, wave lengths and water depths can be investigated using the transformation of wave parameters in shallowing waters and the constraints on wave dimensions provided by the wave-breaking condition. Given reasonable estimates of wave height, crude estimates of wave power allow a comparison of ancient wave-influenced sequences with modern counterparts.

Wave ripple-marks preserved in the Upper Marine Molasse of western Switzerland have been investigated. Results, which are in agreement with regional geology, suggest deposition in a seaway of approximately 100 km width, where moderate period waves (T = 3–6 s) were generated. The depositional facies belts were adjusted to the prevailing waves, tides and fluvial outflows.  相似文献   

The behaviour of a Cu(II) ion selective electrode in seawater; copper consumption capacity and copper determinations     

D. A. Romn  L. Rivera 《Marine Chemistry》1992,38(3-4)

Determinations of copper consumption capacity (CuCs.C) and labile copper concentrations in surface coastal seawater, using a copper ion selective electrode (Cu-ISE) potentiometric method under predominantly diffusive conditions, are reported. For evaluation of the copper concentrations, the points of the endpoint contiguity zone of the CuCs.C titration curve were treated by an ISE multiple standard addition technique. The results were compared with those obtained by means of a Chelex-100 (calcic form) ‘batch’ procedure-potentiometric stripping analysis.The labile copper of the sample was determined at concentrations down to 10.70 nM with an average RSD of 12%, independent of the Cu-ISE employed. For adjacent subsamples, the mean CuCs.C values obtained for El Way seawater were equivalent to 81.05 and 48.00 nM copper, with an RSD of 4 and 7%, and for Isla Santa Maria seawater the value was equivalent to 70.27 nM copper, with an RSD of 7%. The theoretical approach of the electrode diffusive mechanism proposed, which would depend, fundamentally, on the adsorptive, complexing and reducing properties of the dissolved organic matter in the seawater sample, allows simultaneous analytical determination of CuCs.C and labile copper concentration in seawater.  相似文献   

Interannual variations in copepod nauplii prey of larval fish in an Alaskan Bay     

Paul  A. J.; Coyle  K. O.; Haldorson  L. 《ICES Journal of Marine Science》1991,48(2):157-165

  相似文献   

Trace element distributions in coastal waters along the US-Mexican boundary: relative contributions of natural processes vs. anthropogenic inputs     

Sergio A. Saudo Wilhelmy  A. Russell Flegal 《Marine Chemistry》1991,33(4)

Trace element concentrations (Pb, Cd, Mn, Fe, and Zn) were measured along four surface water transects across the continental shelf off Baja California, to evaluate the magnitude of heavy metal contamination in the coastal waters along the US-Mexican boundary. These initial measurements of trace elements in Mexican neritic waters revealed offshore concentration gradients, with the highest levels in coastal waters with high salinities and nutrient concentrations. There were also longshore gradients, with lower concentrations in the southern locations. Although the relative enrichment of metals detected at nearshore stations along the US-Mexican border appeared to correspond to wastewater discharges in that area, these trace metal enhancements were found to be primarily associated with physical oceanographic processes (upwelling and advection), rather than anthropogenic inputs. This was demonstrated both by metal-nutrient correlations and multivariate statistical analyses. Mass balance calculations also indicated that about 1% of Cd, 9% of Zn, and 29% of Pb were from urban discharges within the area.  相似文献   

Mechanisms controlling the temporal variation of the sea ice edge in the Southern Ocean     

Noriaki Kimura 《Journal of Oceanography》2007,63(4):685-694

This paper examines the mechanism controlling the short time-scale variation of sea ice cover over the Southern Ocean. Sea ice concentration and ice velocity datasets derived from images of the Defense Meteorological Satellite Program (DMSP) Special Sensor Microwave Imager (SSM/I) are employed to reveal this mechanism. The contribution of both dynamic and thermodynamic processes to the change in ice edge location is examined by comparing the meridional velocity of ice edge displacement and sea ice drift. In the winter expansion phase, the thermodynamic process of new ice production off the ice edge plays an important role in daily advances of ice cover, whereas daily retreats are mostly due to southward ice drift. On the other hand, both advance and retreat of ice edges in the spring contraction phase are mostly caused by the dynamic process of the ice drift. Based on the above mechanism and the linear relation between the degree of ice production at the ice edge and northward wind speed, the seasonal advance of ice cover can be roughly reproduced using the meridional velocity of ice drift at the ice edge.  相似文献   

The Levant Slumps and the Phoenician Structures: collapse features along the continental margin of the southeastern Mediterranean Sea     

Yossi Mart  William Ryan 《Marine Geophysical Researches》2007,28(4):297-307

Two distinct series of slumps deform the upper part of the sedimentary sequence along the continental margin of the Levant. One series is found along the base of the continental slope, where it overlies the disrupted eastern edge of the Messinian evaporites. The second series of slumps transects the continental margin from the shelf break to the Levant Basin. It seemed that the two series were triggered by two unrelated, though contemporaneous, processes. The shore-parallel slumps were initiated by basinwards flow of the Messinian salt, that carried along the overlying Plio-Quaternary sediments. Seawater that percolated along the detachment faults dissolved the underlying salt to form distinctly disrupted structures. The slope-normal slumps are located on top of large canyons that cut into the pre-Messinian sedimentary rocks. A layer of salt is found in the canyons, and the Plio-Quaternary sediments were deposited on that layer. The slumps are bounded by large, NW-trending faults where post-Messinian faulted offset was measured. We presume that the flow of the salt in the canyons also drives the slope-normal slumps. Thus thin-skinned halokynetic processes generated the composite post-Tortonian structural patterns of the Levant margin. The Phoenician Structures are a prime example of the collapse of a distal continental margin due to the dissolution of a massive salt layer.  相似文献   

Estimates of the characteristics of the horizontal turbulent exchange in the northwestern part of the Pacific Ocean     

M. S. Permyakov  T. I. Tarkhova  A. S. Sergienko 《Oceanology》2007,47(5):647-652

Estimates of the characteristics of the horizontal turbulent exchange (coefficients of horizontal exchange, scales of deviations of the velocity of geostrophic currents from the background flows, and horizontal scales of perturbations) in the upper ocean layer were obtained on the basis of the data of expeditions held in 1978 and 1980 in the northwestern part of the Pacific Ocean. It is shown that the characteristics of the horizontal turbulent exchange strongly depend on the structure of the background flows, and one of the causes of their variability is related to tropical cyclones. A tendency to a decrease (to different degrees) of the turbulent coefficients in the wake of a tropical cyclone is noted.  相似文献   

On the relevance of iron adsorption to container materials in small-volume experiments on iron marine chemistry: Fe-aided assessment of capacity, affinity and kinetics     

A.C. Fischer  J.J. Kroon  T.G. Verburg  T. Teunissen  H.Th. Wolterbeek 《Marine Chemistry》2007,107(4):533-546

Iron chemistry in seawater has been extensively studied in the laboratory, mostly in small-volume sample bottles. However, little has been reported about iron wall sorption in these bottles. In this paper, radio-iron ⁵⁵Fe was used to assess iron wall adsorption, both in terms of capacity, affinity and kinetics. Various bottle materials were tested. Iron sorption increased from polyethylene/polycarbonate to polymethylmetacrylate (PMMA)/high-density polyethylene/polytetrafluoroethylene to glass/quartz, reaching equilibrium in a 25–70 h period. PMMA was studied in more detail: ferric iron (Fe(III)) adsorbed on the walls of the bottles, whereas ferrous iron (Fe(II)) did not. Considering that in seawater the inorganic iron pool mostly consists of ferric iron, the wall will be a factor that needs to be considered in bottle experiments.The present data indicate that for PMMA with specific surface (S)-to-volume (V) ratio S/V, both iron capacity (42 ± 16 × 10^− 9 mol/m² or 1.7 × 10^− 9 mol/L recalculated for the S/V-specific PMMA bottles used) and affinity (log K_Fe'W = 11.0 ± 0.3 m²/mol or 12.4 ± 0.3 L/mol, recalculated for the S/V-specific PMMA bottles used) are of similar magnitude as the iron capacity and -affinity of the natural ligands in the presently used seawater and thus cannot be ignored.Calculation of rate constants for association and dissociation of both Fe'L (iron bound to natural occurring organic ligands) and Fe'W (iron adsorbed on the wall of vessels) suggests that the two iron complexes are also of rather similar kinetics, with rate constants for dissociation in the order of 10 ⁻⁴–10^− 5 L/s and rate constants for association in the order of 10⁸ L/(mol s). This makes that iron wall sorption should be seriously considered in small-volume experiments, both in assessments of shorter-term dynamics and in end-point observations in equilibrium conditions. Therefore, the present data strongly advocate making use of iron mass balances throughout in experiments in smaller volume set-ups on marine iron (bio) chemistry.  相似文献   

Chalk shore platform erosion in the vicinity of sea defence structures and the impact of construction methods     

Uwe Dornbusch  David A. Robinson  Rendel B.G. Williams  Cherith A. Moses 《Coastal Engineering》2007

Erosion of the intertidal chalk platform in the vicinity of groynes and seawalls is evident to the naked eye along many stretches of the engineered coastline of southeast England, leading to undermining and eventually failure of these structures. However, quantification of the magnitude and spatial extent of the erosion has been difficult to date because of a lack of data about the past elevation of the platform. The application of softcopy photogrammetry makes it possible to recreate past platform elevations from historic air photographs and to compare these with elevations from modern air photographs. Coastal sea defence structures have been installed along the chalk coast east of Brighton at various dates over the past 70 years. During this period, the construction methods have changed from predominantly manual labour to a reliance on heavy machines. The analysis of erosion patterns around structures built since the 1970s using heavy machinery show that surface lowering is 4 to 25 times greater in the vicinity of these structures than across the platform as a whole. In contrast, there is no similar pattern of increased erosion around structures built using predominantly manual labour in the 1930s. A four fold increase in average surface lowering is found also along a vehicle trackway that crosses the mid platform. Depressions developed by enhanced lowering in the front of seawalls generate their own dynamic of increased erosion by trapping pebbles and cobbles that enhance the abrasion of the chalk through bedload transport under standing waves in front of the walls.  相似文献   

On the use of poorly soluble hygroscopic substances for modification of warm clouds and fogs     

N. P. Romanov  A. S. Drofa  N. S. Kim  A. V. Savchenko  G. F. Yaskevich 《Izvestiya Atmospheric and Oceanic Physics》2006,42(1):74-83

From analysis of the relationships between the equilibrium state of condensation nuclei and the relative humidity, a conclusion is made concerning the preferred use of poorly soluble substances for the generation of artificial condensation nuclei (ACN) designed for modification of warm clouds and fogs with the purpose of their dissipation and precipitation formation. The advantage of poorly soluble substances over commonly used soluble salts is that the finely dispersed part of the spectrum of the poorly soluble ACN does not deliquesce and so is not involved in the formation of cloud droplets. For experimental testing of the conclusions, preference was given to cement, whose main soluble substance is calcium oxide with a solubility of about 1 g/l. The spectrum of dispersed cement particles was measured and compared with the spectra of pyrotechnic flares widely used for modification at present. The process of formation of the cloud droplet spectra was simulated in the aerosol chamber of the Institute of Experimental Meteorology by decreasing the preliminarily generated excess pressure. It was found in these experiments that, compared to the spectra of particles formed on background condensation nuclei, the introduction of dispersed cement leads to the broadening of spectra and to a decrease in the concentration of droplets. Even at the early stage of condensation, droplets with radii of ∼20 μm appear. In this case, no “overseeding” phenomenon is observed, which, for soluble substances, manifests itself in an increase in the concentration of cloud droplets with a large ACN concentration. These effects indicate that, according to the existing concepts about the mechanism of warm-cloud modification with hygroscopic substances, the introduction of poorly soluble ACN (in particular, dispersed cement) below the base of cumulus clouds should stimulate coagulation processes and accelerate rain-formation processes. Considerations are given that the introduction of poorly soluble ACN into the already existing cumulus or stratocumulus clouds or fogs should also result in the acceleration of precipitation-formation processes or cloud dispersal. Comparison of cement powder with the well-known means of warm-cloud and fog modification is carried out. Original Russian Text ? N.P. Romanov, A.S. Drofa, N.S. Kim, A.V. Savchenko, G.F. Yaskevich, 2006, published in Izvestiya AN. Fizika Atmosfery i Okeana, 2006, Vol. 42, No. 1, pp. 80–91.  相似文献