Gas emission from the working face in a gas-bearing coal seam impairs safe production. Especially in the coal face, influenced by mining, pressure-relief gas in adjacent seams flows into the working face through the goaf. Moreover, caved overlying strata in different regions show differences in pore and seepage characteristics. Thus, the caving of overlying strata in the goaf of a working face was explored by carrying out physical similarity simulation. Then, based on the characteristics of the geometric shapes of caved overlying strata after mining, a trapezoidal three-dimensional model for gas extraction was established. According to the calculation result, the parameters of field high-level boreholes were optimized. Then, the controllability of gas concentration at the working face after gas extraction was assessed by applying statistical process control. The result showed that after the observed surface of the physical similarity model was lightened, it was more favorable for conducting the test. Moreover, the maximum gas concentration in the goaf was negatively correlated with the diameter of high-level boreholes and the negative pressure for gas extraction. A statistical process control chart revealed that the gas concentrations at the working face were safe after gas extraction based on high-level boreholes, which also validated the feasibility and effectiveness of the model.
相似文献Since most coalfields in China are commonly characterized by high gas content and low permeability, there is an urgent need to improve coal seam permeability and further enhance coal bed methane (CBM) extraction efficiency. As an emerging fracturing technology, the CO2 gas fracturing (CGF) technology has been widely used because of its advantages of low cost, environmental protection and high fragmentation efficiency. In order to improve the fracturing ability of CGF technique and optimize the release orifices of discharge head, computational fluid dynamics model was used in this paper to simulate the flow fields of dynamic pressure of gas jet released from the orifices with different structures and other geometrical parameters. The results show that the orifice structure has a great influence on the flow field of gas jet, but little influence on the magnitude of the dynamic pressure. Besides, the maximum dynamic pressure of gas jet linearly decreases with the increase in the number of release orifices. Based on a series of simulation results, the discharge head which has single group of orifices with structure c, diameter of 24 mm can be identified as the best choice for fieldwork. Then, two field experiments were conducted in Pingdingshan and Changping coal mines to evaluate the enhanced CBM extraction efficiency by CGF. The results indicate that the CGF can effectively create a large number of cracks in a large range around the fracturing borehole in the coal seam and further significantly improve the permeability. And the CBM extraction efficiency can be improved to a higher level from a lower level and maintained for a long time. Besides, the effective influence radii caused by CGF in Pingdingshan and Changping coal mines are 15.19 m and 12.5 m, respectively. Compared with other fracturing techniques, the CGF technique has a promising application prospect.
相似文献