Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method   总被引：2，自引：0，他引：2  

S.‐H. Chen  X.‐M. Feng  S. Isam 《国际地质力学数值与分析法杂志》2008,32(12):1459-1477

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

基于特征提取的目标变化检测方法研究     

朱朝杰  董广军  王仁礼 《海洋测绘》2007,27(2):50-52

针对不同时相遥感影像中特定目标的变化,研究了基于特征提取的目标变化检测方法。该方法首先根据目标的几何特征进行检测与提取,然后对提取出的两目标影像进行比较,得到特定目标的变化。实验结果表明该方法对特定目标的变化检测有较好的效果。  相似文献   

A cascade wire separator     

《International Journal of Mineral Processing》2005,78(1):40-48

Separation of wires from recycling streams is often desired for material recovery, quality improvement or for operational reasons. It increases the recovery of non-ferrous metals while congestion of material flows can be avoided. Tests with a new type of separator give good results for removing wires and other long particles from a granular stream of material. High recovery is achieved by repeating a simple separation step many times within one unit process. The resulting cascade system was tested with 700 kg of bottom ash, showing good agreement with theory and resulting in a complete recovery of wires exceeding 50 mm in length.  相似文献   

Validating the ability of the discontinuous deformation analysis method to model normal P‐wave propagation across rock fractures          下载免费PDF全文

Wenjun Gong  Yunsheng Wang  Youjun Ning  Yonghong Luo  Yujie Wang 《国际地质力学数值与分析法杂志》2017,41(10):1267-1282

The effects of fractures on wave propagation problems are increasingly abstracting the attention of scholars and engineers in rock engineering field. This study aims to fully validate the ability of discontinuous deformation analysis (DDA) to model normal P‐wave propagation across rock fractures. The effects of a single fracture and multiple parallel fractures are all tested. The results indicate that DDA can accurately reflect the fracture effects, including the fractures stiffness, the fracture spacing and the fracture number, and the effects of incident wave frequency on one‐dimensional P‐wave propagation problems. Thus, DDA is able to deal well with normal incident P‐wave propagation problems. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Flotation characteristics of two different types of ilmenite with sodium oleate     

Zhang Jie  Liu Weijun  Wang Weiqing  Xiong shuqing  Wang dezhi  Yan Wu  Deng Jie 《Mineralogy and Petrology》2015,109(3):299-306

  相似文献   

Refined chronostratigraphy of the late Mesozoic terrestrial strata in South China and its tectono-stratigraphic evolution     

《Gondwana Research》2019

The late Mesozoic terrestrial strata in numerous basins in S (South) China provide important sedimentary archives to understand the tectonic evolution of S China and East Asia. However, establishing regional stratigraphic framework within a basin and precisely correlating strata among basins remain challenging due to limited chronological constraints. In this study, we report zircon U-Pb ages of 21 samples and a compilation of 132 reliable age data from 15 type sections of the volcanic-sedimentary basins in S China. The synthesized geochronology allows us to establish a refined chronostratigraphy for the late Mesozoic terrestrial strata. New calibrated results indicate that most of the lithostratigraphic units are diachronic, laterally stacking, and/or interfingering. Six stacking styles are classified for the relationship of lithostratigraphic units. Analysis of the refined chronostratigraphy and the stratal stacking styles, together with lithological composition, reveals three episodes of tectono-stratigraphic evolution. Episode I (~145–125 Ma) is characterized by intense volcanism, as evidenced by widespread occurrence of volcanic strata and (137–120 Ma) A-type granites, and was probably related to the rollback of the subducting Paleo-Pacific plate; The strata deposited during Episode II (~125–100 Ma) are composed of variegated sediments associated with/without volcanic intercalations in sedimentary faulted-depression basins, indicating the waning of volcanism and tectonism attributed to the ending of the Izanagi/Kula plate subduction; In Episode III (<~100 Ma), red strata occurred along the NE-SW sinistral strike-slip faulting or failed rifting in small basins, which probably resulted from the drastic directional change of the Paleo-Pacific plate subduction from NW to SN.  相似文献   

The fault-controlled skarn W–Mo polymetallic mineralization during the main India–Eurasia collision: Example from Hahaigang deposit of Gangdese metallogenic belt of Tibet     

《Ore Geology Reviews》2014

The Hahaigang W–Mo polymetallic skarn deposit is located in the central-eastern part of Gangdese tectono-magmatic belt in Lhasa terrane, Tibet. The deposit was discovered in 2007 with currently proven 46 million tons of WO₃ ores, 12 million tons of Mo ores, and 1.31 million tons of combined Cu–Pb–Zn ores, at an average grade of 0.20% WO₃, 0.07% Mo, 0.026% Cu, 0.49% Pb, and 3.1% Zn. Ore bodies occur in veins or disseminations, and are confined within the NE-striking Dalong fault zone which is hosted by the Lower-Permian Pangna Group of dominantly quartz sandstone and slate. Several granitic plutons are exposed in the area or known from drill-holes. Ages of these granitic plutons are determined by using zircon U–Pb LA–ICP–MS method. For example, the biotite monzogranite yields a ²⁰⁶Pb/²³⁸U–²⁰⁷Pb/²³⁸U concordia age of 58.66 ± 0.90 Ma and a weighted mean ²⁰⁶Pb/²³⁸U age of 57.02 ± 0.42 Ma. The granite porphyry yields a ²⁰⁶Pb/²³⁸U–²⁰⁷Pb/²³⁸U concordia age of 109.1 ± 8.9 Ma and a weighted mean ²⁰⁶Pb/²³⁸U age of 114.0 ± 2.6 Ma. The biotite monzogranite yields a weighted mean ²⁰⁶Pb/²³⁸U age of 56.1 ± 1.1 Ma. Re–Os isochron age of 63.2 ± 3.2 Ma from 5 molybdenite samples collected from the W–Mo skarn ores is also obtained in this study. The zircon U–Pb and molybdenite Re–Os geochronological data suggest that the W–Mo mineralization was not temporally associated with any of the dated igneous plutons. However, the molybdenite Re–Os age of 63.2 ± 3.2 Ma indicates that the W–Mo mineralization might have occurred during the main India–Eurasia collision that was initiated around 65 Ma. Microprobe analysis of ilvaite that occurs in two generations in the W–Mo skarn ores reveals a close relationship to Ca–Fe–F-rich hydrothermal fluids, which were probably derived from deeply-seated magmas. We suggest that ascent of the fluids was strictly controlled by the ore-controlling Dalong fault zone, and that chemical interaction and metasomatism between the fluids and the Lower-Permian Pangna quartz-feldspathic host rocks produced the ilvaite and the W–Mo polymetallic skarn deposit during the main India–Eurasia collision. Although the majority of the polymetallic deposits in the Gangdese belt are reported to be either pre- or post-main collision, it is evident from this study that the main collision also produced W–Mo polymetallic mineralization within the belt.  相似文献   

PMODTRAN: a parallel implementation based on MODTRAN for massive remote sensing data processing     

Fang Huang  Ji Zhou  Xicheng Tan  Shunlin Liang  Jie Cheng 《International Journal of Digital Earth》2016,9(9):819-834

MODerate resolution atmospheric TRANsmission (MODTRAN) is a commercial remote sensing (RS) software package that has been widely used to simulate radiative transfer of electromagnetic radiation through the Earth's atmosphere and the radiation observed by a remote sensor. However, when very large RS datasets must be processed in simulation applications at a global scale, it is extremely time-consuming to operate MODTRAN on a modern workstation. Under this circumstance, the use of parallel cluster computing to speed up the process becomes vital to this time-consuming task. This paper presents PMODTRAN, an implementation of a parallel task-scheduling algorithm based on MODTRAN. PMODTRAN was able to reduce the processing time of the test cases used here from over 4.4 months on a workstation to less than a week on a local computer cluster. In addition, PMODTRAN can distribute tasks with different levels of granularity and has some extra features, such as dynamic load balancing and parameter checking.  相似文献   

Late Cretaceous magmatism and related metallogeny in the Tengchong area: Evidence from geochronological,isotopic and geochemical data from the Xiaolonghe Sn deposit,western Yunnan,China     

《Ore Geology Reviews》2016

Xiaolonghe is a poorly studied greisen-type tin deposit that is hosted by biotite granite in the western Yunnan tin belt. The mineralisation-related metaluminous and weak peraluminous granite is characterised by high Si, Al and K and low Mg, Fe and Ca, with an average A/CNK of 1.02. The granite is enriched in LILEs (K and Rb), LREEs and HFSEs (Zr, Hf, Th, U and Ce) and depleted in Ba, Nb, Sr, P, and Ti, with zircon εHf(t) = − 10.8 to − 7.5 (T_DM2 = 1.61–1.82 Ga). These characteristics indicate that the magma was generated by the partial melting of a thickened ancient crust. LA-ICP-MS U–Pb dating of igneous zircon and hydrothermal cassiterite yield ages of 71.4 ± 0.4 Ma and 71.6 ± 4.8 Ma, respectively. The igneous biotite and hydrothermal muscovite samples show Ar–Ar plateau ages of 72.3 ± 0.4 Ma and 70.6 ± 0.2 Ma, respectively. The close temporal relationship between the igneous emplacement and hydrothermal activity suggests that the tin mineralisation was closely linked to the igneous emplacement. The δ¹⁸O and δD values for the deposit range from + 3.11‰ to − 4.5‰ and from − 127.3‰ to − 94.7‰, respectively. The hydrothermal calcite C and O isotopic data show a wide range of δ¹³C_PDB values from − 5.7‰ to − 4.4‰, and the δ¹⁸O_SMOW values range from + 1.4‰ to + 11.2‰. The δ³⁴S_V-CDT data range from + 4.8‰ to + 8.9‰ for pyrite, and the ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb ratios range from 18.708 to 18.760, from 15.728 to 15.754 and from 39.237 to 39.341, respectively. The stable isotopic (C–H–O–S–Pb) compositions are all similar to those of magmatic and mantle-derived fluids, which indicate that the ore-forming fluids and materials were mainly derived from magmatic sources that were accompanied by meteoric water. The tin mineralisation in the Xiaolonghe district was closely associated with the Late Cretaceous crustal-melting S-type granites that formed during the subduction of the Neo-Tethys oceanic lithosphere. Combined with the tin deposits in the Southeast Asian tin belt, Tengchong block and Central Lhasa, we interpreted that a giant intermittent tin mineralisation belt should be present along the Asian Neo-Tethys margin.  相似文献   

An efficient quasi-Newton approximation-based SORM to estimate the reliability of geotechnical problems     

《Computers and Geotechnics》2016

The first order reliability method (FORM) is efficient, but it has limited accuracy; the second order reliability method (SORM) provides greater accuracy, but with additional computational effort. In this study, a new method which integrates two quasi-Newton approximation algorithms is proposed to efficiently estimate the second order reliability of geotechnical problems with reasonable accuracy. In particular, the Hasofer–Lind–Rackwitz–Fiessler–Broyden–Fletcher–Goldfarb–Shanno (HLRF–BFGS) algorithm is applied to identify the design point on the limit state function (LSF), and consequently to compute the first order reliability index; whereas the Symmetric Rank-one (SR1) algorithm is nested within the HLRF–BFGS algorithm to compute good approximations, yet with a reduced computational effort, of the Hessian matrix required to compute second order reliabilities. Three typical geotechnical problems are employed to demonstrate the ability of the suggested procedure, and advantages of the proposed approach with respect to conventional alternatives are discussed. Results show that the proposed method is able to achieve the accuracy of conventional SORM, but with a reduced computational cost that is equal to the computational cost of HLRF–BFGS-based FORM.  相似文献