排序方式： 共有12条查询结果，搜索用时 237 毫秒
1.
A complete thermal history for the Qulong porphyry Cu–Mo deposit, Tibet is presented. Zircon U–Pb geochronology indicates that the mineralization at Qulong resulted from brecciation-veining events associated with the emplacement of a series of intermediate-felsic intrusions. Combined with previously published ages, our results reveal a whole intrusive history of the Qulong composite pluton. Causative porphyries were emplaced at ~ 16.0 Ma as revealed by 40Ar–39Ar dating of hydrothermal biotite (15.7 ± 0.2 Ma) and sericite (15.7 ± 0.2 Ma). Zircon and apatite (U–Th)/He (ZHe and AHe) dating of Qulong revealed that both followed similar, monotonic thermal trajectories from 900 °C (U–Pb ages: 17.5–15.9 Ma) to 200 °C (ZHe: 15.7–14.0 Ma), and that the causative porphyries experienced faster cooling at a maximum rate of greater than 200 °C/myr. The Qulong deposit was exhumed between 13.6 Ma and 12.4 Ma (AHe) at an estimated rate of 0.16–0.24 mm/y, which is consistent with previous estimates for other Gangdese Miocene porphyry deposits. Our AHe thermochronology results suggest that neither the Gangdese thrust system, nor the Yadong–Gulu graben affected or accelerated exhumation at the Qulong deposit. 相似文献
2.
江西银山热液多金属矿床矿体围岩发生了强烈的伊利石化,研究这些伊利石化是认识本矿床成矿作用的关键之一。通过伊利石的化学成分和矿体围岩蚀变前后的化学成分比较等方面的研究,本文得出以下认识:银山矿矿体围岩千枚岩、英安质流纹岩和中酸性次火山岩都发生了强烈的伊利石化,矿石与蚀变千枚岩中伊利石的化学成分最为相近。银山矿矿体蚀变围岩的化学成分以K2O的含量较高、Na2O和CaO的含量都很低(平均值都在0.11%左右)为特征,矿体围岩在伊利石化过程中Ca和Na被大量带出。综合各方面的证据推测,引起强烈伊利石化的热液是以H2O+CO2为主要组份的氧化性火山-次火山热液。 相似文献
3.
The Luoboling Cu–Mo deposit in the Zijinshan Orefield, Fujian province, southeastern China, is a large porphyry deposit hosted by the Sifang granodiorite and the Luoboling granodiorite porphyry. The largest Cu–Mo orebody is saddle-shaped with various types of hydrothermal veinlets. Intensive hydrothermal alteration in the deposit is characterized by outward zoning from potassic, overprinted by phyllic alteration, to phyllic and alunite–dickite alteration. Based on the mineral assemblages and crosscutting relationships of veins, the ore-forming process can be divided into three stages, namely: an early-stage K-feldspar + quartz ± magnetite ± molybdenite veins associated with potassic alteration; a middle-stage quartz + molybdenite + chalcopyrite + pyrite veins in phyllic zone; and a late-stage quartz ± gypsum veins in the phyllic and alunite–dickite alteration zones. Six molybdenite separates yield a Re−Os isochron age 104.6 ± 1.0 Ma, which is identical to the age of emplacement of the Sifang and Luoboling granodiorite porphyries. Three types of fluid inclusions (FIs) were observed at the Luoboling deposit: 1) NaCl–H2O (aqueous), 2) daughter mineral-bearing and 3) CO2–H2O fluid inclusions. FIs of the early and middle stages are predominantly vapor-rich aqueous and daughter mineral-bearing inclusions, together with minor CO2-rich and liquid-rich aqueous inclusions; whereas the late-stage minerals only contain liquid-rich aqueous inclusions. Homogenization temperatures and salinities of FIs trapped in the early-stage minerals range from 420 to 540 °C and 0.4 to 62.9 wt.% NaCl equiv., respectively. FIs of the middle-stage yield homogenization temperatures of 340 to 480 °C and salinities of 0.5 to 56.0 wt.% NaCl equiv. CO2 content and the oxygen fugacity (indicated by daughter minerals) of FIs trapped in middle-stage minerals are lower than those in the early stage. The liquid-rich aqueous inclusions of the late-stage homogenize at temperatures of 140 to 280 °C, yielding salinities of 0.4 to 8.4 wt.% NaCl equiv. The minimum estimated pressures of the three stages are 30–70 MPa, 10–40 MPa and 1–10 MPa, respectively, corresponding to minimum ore-forming depths of 1–2.8 km. Fluids trapped in early, middle and late stages yield δD values of − 67‰ to − 54‰, − 54‰ to − 70‰, and − 62‰, and δ18O values of 5.4‰ to 6.7‰, 2.8‰ to 4.2‰, and − 2.1‰, respectively. Fluid boiling, which resulted in the formation of stockworks and the precipitation of sulfides, occurred in the early and middle stages. The fluids subsequently evolved into a low temperature, low salinity system in the late stage, along with an input of meteoric water. The Luoboling porphyry Cu–Mo system was developed in a transition from continental arc to back-arc extension region, which was related to the westward subduction of the paleo-Pacific plate beneath the Huanan Orogen. 相似文献
4.
德兴朱砂红斑岩型铜(金)矿床流体包裹体研究 总被引：3，自引：0，他引：3
朱砂红矿床是德兴铜矿田的3大矿床之一,与铜厂、富家坞矿床呈NW向展布.为了查明该矿床的热液蚀变系统、矿化特征及成矿流体性质,文章选取朱砂红矿区5条勘探线上的21个钻孔,通过详细的岩芯编录和岩相学观察,依据矿物组合、脉体穿切关系及蚀变特征,将该矿区内的脉体分为A脉、B脉、D脉及后期碳酸盐和硫酸盐脉,A、B及D脉为主要的矿化脉,共有14种类型.对各期脉体内石英中的流体包裹体进行了系统的显微测温、气液相成分激光拉曼显微分析(LRM),从而详细示踪了成矿流体演化及蚀变-矿化过程.经研究得知,该矿区流体演化过程包括:成矿早期A脉形成阶段,发育4种脉体类型,其脉体多呈不规则状、顺板理团块状,发育的流体包裹体以富气相和含单子晶或多子晶相(还见有金属硫化物)组合为特点,均一温度为350～550℃,ω(NaCleq)主要集中在52.9％ ～69.9％(含子晶多相包裹体)和2.9％～16.8％(气液两相包裹体)2个区间内,该阶段的流体与早期的钾长石化蚀变关系密切;成矿中期B脉形成阶段,发育5种脉体,以平直为显著特征,发育富气相包裹体和单子晶包裹体,还含有部分富液相包裹体,其均一温度为248～405℃,ω(NaCleq)主要集中在38.6％ ～58.0％和0.9％～10.6％范围内,由于该阶段裂隙发育,成矿流体发生了减压沸腾作用,大量金属发生沉淀,是Cu(Au)、Mo的主要成矿阶段;成矿晚期D脉形成阶段,共有5种脉体类型,以富液相包裹体为主,还有少量富气相包裹体,其均一温度为127～326℃,ω(NaCleq)为0.4％～5.1％,该阶段形成了规模较大的黄铁绢英岩化和绿泥石-水云母化,伴有Mo矿化及少量Cu矿化.朱砂红矿区热液流体的演化总体上是,从早期的高温、中-高盐度的岩浆热液,向成矿晚期中-低温、低盐度的岩浆热液+大气降水混合流体转变.气液相成分激光拉曼显微分析(LRM)结果显示,在朱砂红矿区流体的演化过程中,有少量CO2的参与.此外,该矿床流体包裹体内所发现的多种暗色子矿物还有待进行系统鉴定. 相似文献
5.
江西德兴斑岩铜钼矿床流体包裹体子矿物SEM-EDS 研究及其对成矿流体性质的制约 总被引：6，自引：1，他引：5
江西德兴斑岩铜钼矿床Q+Py±Cp±Cc脉、(黄铁)绢英岩和Q+Py+Mo±Cp脉中发育大量多相(透明、暗色子矿物)包裹体。本文以详细的显微观察和流体包裹体岩相学观察为基础,利用SEM-EDS(扫描电镜-X射线能谱仪)对多相包裹体内的子矿物进行了系统的鉴定。分析结果表明,Q+Py±Cp±Cc脉石英中发育的透明子矿物包括绢云母、石盐、水氯镁石、白云石、铁氯化物、磷灰石和含稀土元素磷酸盐;暗色子矿物包括赤铁矿、铁氧化物和黄铜矿。(黄铁)绢英岩石英和黄铁矿中透明子矿物包括石盐、(硬)石膏、绢云母、硫酸镁、菱镁矿、六水泻盐和(Fe、Cu、Mg)碳酸盐和硫酸盐,暗色子矿物包括磁铁矿、赤铁矿、金红石和黄铜矿;Q+Py+Mo±Cp脉石英包裹体中发育的子矿物相对较少,透明子矿物包括石盐、菱铁矿和钾长石;暗色矿物为赤铁矿。它们中发育种类繁多的子矿物,表明热液的化学成分非常复杂,多种盐类以及高氧化态子矿物出现指示流体具有高盐度-高氧化态的特征。此外,还鉴别出了黄铜矿、赤铁矿和磁铁矿等金属矿物,这表明热液含有丰富的成矿物质,这些成矿物质随物理化学条件的变化以黄铜矿等金属矿物从热液中沉淀下来,形成了矿床内的主要矿体。结合蚀变矿物组成观察,我们认为Q+Py±Cp±Cc脉、(黄铁)绢英岩和Q+Py+Mo±Cp脉中子矿物组成很可能不代表原始流体的化学成分,因为它们在很大程度上受到了热液蚀变作用的影响,围岩矿物由于水-岩反应被分解,同时释放出Na、Ca、Mg、Fe等元素进入热液,形成了上述种类多样的子矿物。通过流体包裹体岩相学观察发现,(黄铁)绢英岩和中Q+Py+Mo±Cp脉含石盐多相包裹体通常与富气包裹体或者CO2包裹体紧密共生,这表明热液在被捕获前发生了相分离(或沸腾)作用,而这一过程必然会导致富液包裹体盐度的升高,因此不能排除这些高盐包裹体是由中低盐度流体发生相分离而形成的可能性。Q+Py±Cp±Cc脉中发育的稀土子矿物指示成脉流体具有高盐度-低pH-含CO2的特征,而这类子矿物在(黄铁)绢英岩和Q+Py+Mo±Cp脉中不发育的原因可能是CO2与液相发生了相分离作用。 相似文献
6.
The Shapinggou porphyry Mo deposit, one of the largest Mo deposits in Asia, is located in the Dabie Orogen, Central China. Hydrothermal alteration and mineralization at Shapinggou can be divided into four stages, i.e., stage 1 ore-barren quartz veins with intense silicification, followed by stage 2 quartz-molybdenite veins associated with potassic alteration, stage 3 quartz-polymetallic sulfide veins related to phyllic alteration, and stage 4 ore-barren quartz ± calcite ± pyrite veins with weak propylitization. Hydrothermal quartz mainly contains three types of fluid inclusions, namely, two-phase liquid-rich (type I), two- or three-phase gas-rich CO2-bearing (type II) and halite-bearing (type III) inclusions. The last two types of fluid inclusions are absent in stages 1 and 4. Type I inclusions in the silicic zone (stage 1) display homogenization temperatures of 340 to 550 °C, with salinities of 7.9–16.9 wt.% NaCl equivalent. Type II and coexisting type III inclusions in the potassic zone (stage 2), which hosts the main Mo orebodies, have homogenization temperatures of 240–440 °C and 240–450 °C, with salinities of 34.1–50.9 and 0.1–7.4 wt.% NaCl equivalent, respectively. Type II and coexisting type III inclusions in the phyllic zone (stage 3) display homogenization temperatures of 250–345 °C and 220–315 °C, with salinities of 0.2–6.5 and 32.9–39.3 wt.% NaCl equivalent, respectively. Type I inclusions in the propylitization zone (stage 4) display homogenization temperatures of 170 to 330 °C, with salinities lower than 6.5 wt.% NaCl equivalent. The abundant CO2-rich and coexisting halite-bearing fluid inclusion assemblages in the potassic and phyllic zones highlight the significance of intensive fluid boiling of a NaCl–CO2–H2O system in deep environments (up to 2.3 kbar) for giant porphyry Mo mineralization. Hydrogen and oxygen isotopic compositions indicate that ore-fluids were gradually evolved from magmatic to meteoric in origin. Sulfur and lead isotopes suggest that the ore-forming materials at Shapinggou are magmatic in origin. Re–Os dating of molybdenite gives a well-defined 187Re/187Os isochron with an age of 112.7 ± 1.8 Ma, suggesting a post-collisional setting. 相似文献
7.
德兴铜厂斑岩铜(钼金)矿床蚀变-矿化系统流体演化:H-O同位素制约 总被引：2，自引：0，他引：2
江西铜厂斑岩铜(钼金)矿床是德兴斑岩矿集区最大的矿床.文章根据铜厂矿床发育的钾硅酸盐化、绢英岩化、青磐岩化蚀变组合特征,和已厘定的铜厂矿床脉体类型,选取代表不同蚀变矿化阶段的石英、黑云母、绢云母及绿泥石等,进行单矿物的H、O同位素测试.石英和黑云母单矿物O同位素,与石英、黑云母平衡流体的δ 18O 值和δD值联合示踪结果显示,铜厂矿床早期A脉(不规则疙瘩状A1脉、石英-黑云母A2脉和石英-磁铁矿A4脉)和中期B脉(矿物组合为石英-黄铁矿+黄铜矿±辉钼矿±斑铜矿)形成时,成矿热液均为岩浆流体来源,但B脉可能混入了少量大气降水;晚期低温D脉和碳酸岩脉(180～200℃)的成矿热液全部为大气降水来源.斑晶黑云母平衡水的δ 18O和δD值变化范围较大表明,黑云母形成时的热液系统主要为岩浆水,局部受区域变质水和大气降水的混染,也可能与少量黑云母斑晶受到后期绿泥石化、水云母化蚀变有关.绿泥石蚀变主要由岩浆流体作用形成,但混入了一些大气降水,导致其δ 18O值少量降低.绢云母平衡的水的δ18O值和δD值(4.6‰和-19.4‰)表明,绢云母是大气降水与千枚岩共同作用的结果.总体来说,铜厂矿床钾硅酸盐化、绿泥石化蚀变,以及钾硅酸盐化阶段形成的A脉和B脉,均由岩浆流体作用引起,大气降水在绿泥石化阶段进入蚀变-矿化系统,而绢云母化、晚期低温D脉和碳酸盐脉均是大气降水作用的产物. 相似文献
8.
德兴矿集区位于赣东北地区,是中国东部中生代钦杭成矿带中的大型铜金铅锌矿集区之一,集中了铜厂、富家坞和朱砂红斑岩铜钼(金)矿、银山银铜铅锌多金属矿和金山金矿等大型、超大型矿床。本文在系统的野外地质调查与样品采集的基础上,对铜厂、富家坞、朱砂红及银山花岗闪长斑岩进行了LA-MC-ICP-MS锆石U-Pb定年和原位Hf同位素分析。德兴矿集区花岗闪长斑岩的LA-MC-ICP-MS锆石U-Pb的4组年龄分别为:(171±1.2)Ma(铜厂)、(172±0.68)Ma(富家坞)、(173±1.3)Ma(朱砂红)、(176±1.5)Ma(银山),表明这些岩体均为中侏罗世的产物。样品Hf两阶段模式年龄平均值分别为861 Ma、876 Ma、904 Ma和941 Ma,正的εHf(t)平均值在4.34-5.54,Zr/Hf比值接近于上地幔的Zr/Hf比值。锆石Hf同位素组成显示,岩浆源区主要来源于亏损地幔组分,但在岩浆演化中遭受了古老地壳物质的混染,幔源物质在德兴矿集区花岗闪长斑岩的形成过程中发挥了重要作用。德兴矿集区4个矿床成岩成矿的最重要时期在170-175 Ma,该矿集区岩浆热液系统持续活动可能是该大型矿集区形成的重要原因。 相似文献
9.
The Zijinshan ore district occurs as one of the largest porphyry-epithermal Cu–Au–Mo ore systems in South China, including the giant Zijinshan epithermal Cu–Au deposit and the large Luoboling porphyry Cu–Mo deposit. The mineralization is intimately related to Late Mesozoic large-scale tectono-magmatic and hydrothermal events. The Cu–Au–Mo mineralization occurs around intermediate-felsic volcanic rocks and hypabyssal porphyry intrusions. In this study, we summarize previously available Re–Os isotopes, zircon U–Pb age and trace elements, and Sr–Nd–Pb isotope data, and present new Pb–S and Re–Os isotope data and zircon trace elements data for ore-related granitoids from the Zijinshan high-sulfidation epithermal Cu–Au deposit and the Luoboling porphyry Cu–Mo deposit, in an attempt to explore the relationship between the two ore systems for a better understanding of their geneses. The ore-bearing porphyritic dacite from the Zijinshan deposit shows a zircon U-Pb age of 108–106 Ma and has higher zircon Ce4+/Ce3+ ratios (92–1568, average 609) but lower Ti-in-zircon temperatures (588–753 °C, average 666 °C) when compared with the barren intrusions in the Zijinshan ore district. Relative to the Zijinshan porphyritic dacite, the ore-bearing granodiorite porphyry from the Luoboling deposit show a slightly younger zircon U–Pb age of 103 Ma, but has similar or even higher zircon Ce4+/Ce3+ ratios (213–2621, average 786) and similar Ti-in-zircon temperatures (595–752 °C, average 675 °C). These data suggest that the ore-bearing magmatic rocks crystallized from relatively oxidized and hydrous magmas. Combined with the high rhenium contents (78.6–451 ppm) of molybdenites, the Pb and S isotopic compositions of magmatic feldspars and sulfides suggest that the porphyry and ore-forming materials in the Luoboling Cu–Mo deposit mainly originated from an enriched mantle source. In contrast, the ore-bearing porphyritic dacite in the Zijinshan Cu–Au deposit might be derived from crustal materials mixing with the Cathaysia enriched mantle. The fact that the Zijinshan Cu–Au deposit and the Luoboling Cu–Mo deposit show different origin of ore-forming materials and slightly different metallogenic timing indicates that these two deposits may have been formed from two separate magmatic-hydrothermal systems. Crustal materials might provide the dominant Cu and Au in the Zijinshan epithermal deposit. Cu and Au show vertical zoning and different fertility because the gold transports at low oxygen fugacity and precipitates during the decreasing of temperature, pressure and changing of pH conditions. It is suggested that there is a large Cu–Mo potential for the deeper part of the Zijinshan epithermal Cu–Au deposit, where further deep drilling and exploration are encouraged. 相似文献
10.
Xiaofeng Li Yasushi Watanabe Jingwen Mao Shengxiang Liu Xiankui Yi 《Resource Geology》2007,57(3):325-337
The Yinshan deposit in the Jiangnan tectonic belt in South China consists of Pb‐Zn‐Ag and Cu‐Au ore bodies. This deposit contains approximately 83 Mt of the Cu‐Au ores at 0.52% Cu and 0.8 g/t Au, and 84 Mt of the Pb‐Zn‐Ag ores at 1.25% Pb, 1.02% Zn and 33.3 g/t Ag. It is hosted by low‐grade metamorphosed sedimentary rocks and mafic volcanic rocks of the lower Mesoproterozoic Shuangqiaoshan Group, and continental volcanic rocks of the Jurassic Erhuling Group and dacitic subvolcanic rocks. The ore bodies mainly consist of veinlets of sulfide minerals and sulfide‐disseminated rocks, which are divided into Cu‐Au and Pb‐Zn‐Ag ore bodies. The Cu‐Au ore bodies occur in the area close to a dacite porphyry stock (No. 3 stock), whereas Pb‐Zn‐Ag bodies occur in areas distal from the No. 3 stock. Muscovite is the main alteration mineral associated with the Cu‐Au ore bodies, and muscovite and chlorite are associated with the Pb‐Zn‐Ag ores. A zircon sensitive high‐resolution ion microprobe U‐Pb age from the No. 3 dacite stock suggests it was emplaced in Early Jurassic. Three 40Ar‐39Ar incremental‐heating mineral ages from muscovite, which are related to Cu‐Au and Pb‐Zn‐Ag mineralization, yielded 179–175 Ma. These muscovite ages indicate that Cu‐Au mineralization occurred at 178.2±1.4 Ma (2σ), and Pb‐Zn‐Ag mineralization at 175.4±1.2 Ma (2σ) and 175.3±1.1 Ma (2σ), which supports a restricted period for the mineralization. The Early Jurassic ages for the mineralization at Yinshan are similar to that of the porphyry Cu mineralization at Dexing in Jiangnan tectonic belt, and suggest that the polymetallic mineralization occurred in a regional transcompressional tectonic regime. 相似文献