粗粒土三轴试验数值模拟与试样颗粒初始架构初探   总被引：4，自引：1，他引：3  

王光进  杨春和  张超  马洪岭  冒海军  侯克鹏 《岩土力学》2011,32(2):585-592

试样颗粒初始架构是粗粒土室内三轴试验中一个难以人为控制的因素。基于元胞自动机方法,结合粗粒土的室内三轴试验开发了能制备不同颗粒初始架构粗粒土试样的HHC-CA模型,该模型制备的粗粒土试样表征了粗粒土各粒组分布的不均匀性和随机性,再借助FLAC3D进行粗粒土三轴数值模拟试验,并探讨了试样剪切带内的砾石含量和试样砾石含量对内摩擦角的影响。数值模拟结果表明,同一粒径级配下,粗粒土的内摩擦角值与剪切带内的砾石含量呈增函数关系;试样砾石含量的增加可能会出现内摩擦角减小的现象,但同一粒径级配下的内摩擦角均值随试样砾石含量的增加而明显增大。  相似文献   

矩形线圈自感的精确表达式     

武中华  李文尧 《物探化探计算技术》2011,33(5):511-516,463

矩形线圈的自感公式在电气工程、电工电子技术,以及应用地球物理学等领域均有普遍的应用。由于自感计算的复杂性,目前使用的矩形线圈自感公式均为近似计算公式。这里推导了圆截面单匝矩形线圈自感的精确表达式,以及正方形单匝线圈自感的近似公式。目前使用的单匝矩形线圈自感近似公式与这里推导的精确公式相比,均存在很大误差：当正方形线圈边长从1m到5m时,电气工程工具书和电工电子工具书中的自感公式误差为3．06％到2．38％。使用瞬变电磁法勘探中常用的自感公式,当正方形回线边长为5m时,误差最小为-41．17％,最大为228．25％;当回线边长为200m时,误差最小为-59．75％,最大为212．49％。  相似文献   

云南昭通毛坪铅锌矿床同位素地球化学性质研究   总被引：2，自引：0，他引：2  

申屠良义  韩润生  李波  邱文龙 《矿产与地质》2011,25(3):211-216

云南昭通毛坪铅锌矿床是滇东北铅锌成矿带中一个典型的中-大型矿床,文章在分析矿区地质特征的基础上,通过对矿床的硫、铅、碳、氢、氧五种同位素的组成特征及其地球化学性质的研究,探讨了成矿流体的性质和来源以及矿床可能的形成方式等问题.  相似文献   

滇中郝家河砂岩型铜矿床成矿作用过程的流体包裹体证据     

吴海枝  韩润生  吴鹏  唐果  梁徐文 《矿物岩石》2011,31(1)

通过对牟定郝家河砂岩型铜矿床的不同结构构造及矿化类型岩石中矿物包裹体特征的研究及对比,认为不同结构构造及矿化类型岩石的形成与不同成岩-成矿阶段流体的演化特点密切相关。流体包裹体测温数据表明其成矿作用主要经历3个成矿流体演化阶段:成岩期(均一温度:84℃~162℃)、主改造期(均一温度:145℃~227℃)及次改造期(均一温度:129℃~177℃)。3期流体的盐度变化不大,多处于4%~10%之间,而它们的气相成分主要为H2O,其次为CH4和CO2。成岩期流体演化形成了砂岩铜矿的初始矿源层及贫矿体,矿化程度高的地方甚至形成浸染状或纹层状矿石;改造-成矿期的流体则在原来基础上进一步演化形成现今受构造控制的条带状、脉状富矿体。  相似文献   

Source characteristics of the Yutian earthquake in 2008 from inversion of the co-seismic deformation field mapped by InSAR     

Xinjian Shan  Guohong Zhang  Chisheng Wang  Chunyan Qu  Xiaogang Song  Guifang Zhang  Liming Guo 《Journal of Asian Earth Sciences》2011,40(4):935-942

On 21 March 2008, an Ms7.3 earthquake occurred at Yutian County, Xinjiang Uygur Autonomous Region, which is in the same year as 2008 Mw 7.9 Wenchuan earthquake. These two earthquakes both took place in the Bayar Har block, while Yutian earthquake is located in the west edge and Wenchuan earthquake is in the east. The research on source characteristics of Yutian earthquake can serve to better understand Wenchuan earthquake mechanism. We attempt to reveal the features of the causative fault of Yutian shock and its co-seismic deformation field by a sensitivity-based iterative fitting (SBIF) method. Our work is based on analysis and interpretation to high-resolution satellite (Quickbird) images as well as D-InSAR data from the satellite Envisat ASAR, in conjunction with the analysis of seismicity, focal mechanism solutions and active tectonics in this region. The result shows that the 22 km long, nearly NS trending surface rupture zone by this event lies on a range-front alluvial platform in the Qira County. It is characterized by distinct linear traces and a simple structure with 1–3 m-wide individual seams and maximum 6.5 m width of a collapse fracture. Along the rupture zone are seen many secondary fractures and fault-bounded blocks by collapse, exhibiting remarkable extension. The co-seismic deformation affected a big range 100 km × 40 km. D-InSAR analysis indicates that the interferometric deformation field is dominated by extensional faulting with a small strike-slip component. Along the causative fault, the western wall fell down and the eastern wall, that is the active unit, rose up, both with westerly vergence. The maximum subsidence displacement is ～2.6 m in the LOS, and the maximum uplift is 1.2 m. The maximum relative vertical dislocation reaches 4.1 m, which is 10 km distant from the starting rupture point to south. The 42 km-long seismogenic fault in the subsurface extends in NS direction as an arc, and it dipping angle changes from 70° near the surface to 52° at depth ～10 km. The slip on the fault plane is concentrated in the depth range 0–8 km, forming a belt of length 30 km along strike on the fault plane. There are three areas of concentrating slip, in which the largest slip is 10.5 m located at the area 10 km distant from the initial point of the rupture.  相似文献   

The origin of the world class tin-polymetallic deposits in the Gejiu district,SW China: Constraints from metal zoning characteristics and 40Ar–39Ar geochronology     

《Ore Geology Reviews》2013

The Gejiu tin-polymetallic deposits in the Western Cathaysia Block of South China comprise the world's largest primary tin district, with a total resource of approximately 300 million metric ton ores, at an average grade of 1 wt percent Sn. Tin polymetallic mineralization occurs in five deposits and has four ore types, i.e., greisen, skarn, stratabound cassiterite-sulfide (mostly oxidized) and vein type ore. In each deposit the orebodies typically occur in an extensive hydrothermal system centered on a shallow Late Cretaceous granitoid cupola. Metal zoning is well developed both vertically and horizontally over the entire district, from W + Be + Bi ± Mo ± Sn ores inside granite intrusions, to Sn + Cu-dominated ores at intrusion margins and farther out to Pb + Zn deposits in the surrounding host carbonate. This zoning pattern is similar to that of other hydrothermal deposits in other parts of the world, indicating a close genetic relationship between magmatism and mineralization. In this paper, we dated thirteen mica samples from all types of mineralization and from the five deposits in the Gejiu district. The ages range from 77.4 ± 0.6 Ma to 95.3 ± 0.7 Ma and are similar to the existing zircon U–Pb age of the granitic intrusions (77.4 ± 2.5–85.8 ± 0.6), indicating a genetic relationship between the mineralization and the intrusions. Geological characteristics, metal zoning patterns and new geochronological data all indicate that the tin-polymetallic ores in the Gejiu district are hydrothermal in origin and are genetically related to the nearby granitic intrusions. It is unlikely that the deposits are syngenetic, as has been proposed in recent years.  相似文献   

新疆准噶尔北缘托斯巴斯套铁铜金矿床矽卡岩和磁铁矿矿物学特征及其地质意义   总被引：3，自引：1，他引：2  

吕书君  杨富全  柴凤梅  张志欣  李强 《岩矿测试》2013,32(3):510-521

托斯巴斯套铁铜金矿床赋存于中泥盆统北塔山组火山岩与闪长(玢)岩的接触带中,矿体呈脉状、透镜状,矿体及其周围发育大量矽卡岩.本文分别利用电子探针、电感耦合等离子体质谱法(ICP-MS),对托斯巴斯套铁铜金矿附近的石榴子石、辉石、绿帘石的化学组分及磁铁矿的主量及微量元素开展研究.结果表明:矽卡岩矿物中石榴子石端员组分以钙铝榴石一钙铁榴石系列为主,辉石端员组分以透辉石为主,绿帘石化学成分富铁富钙,这些特点表明矿区矽卡岩具有钙矽卡岩特征.矽卡岩是由岩浆热液流体交代北塔山组基性火山岩而形成的,磁铁矿的形成与矽卡岩的退化变质作用有关.在石英-硫化物-碳酸盐阶段形成铜和金矿化.  相似文献   

A new Hvorslev surface for critical state type unsaturated and saturated constitutive models     

《Computers and Geotechnics》2013

Constitutive models for unsaturated soils are most commonly based on conventional critical state type models for saturated soils. The ellipse of the modified Cam-clay model is usually adopted for the formulation of the yield and the plastic potential surfaces in the mean stress – deviatoric stress plane. Despite the wide use of this ellipse it has long been shown that the peak deviatoric stress observed for highly overconsolidated states may be largely overestimated. For fully saturated conditions, a planar surface, termed the Hvorslev surface, has been employed in the literature in order to overcome this shortcoming on the dry side of the critical state. In addition, by employing a no-tension cut-off, stress states are restricted within the compressive region. In unsaturated conditions and due to the effect of suction the soil may be subjected to tensile total stresses which should not, however, exceed a model dependent limit. Nonetheless, adopting a planar surface and in the absence of any provision, illegal tensile stresses may be obtainable. For this reason, a new expression for the Hvorslev surface, which restricts the stress state within acceptable boundaries, is proposed, based on a small number of model parameters. The new surface is curved rather than planar and can also be used in combination with critical state type constitutive models developed for saturated conditions. The new surface is calibrated based on fully saturated undrained triaxial compression and extension tests and on unsaturated drained triaxial tests. The superiority of the new surface in comparison with commonly adopted shapes for the yield and the plastic potential functions – such as the ellipse and the bullet shape of the modified and the original Cam clay models – is demonstrated through numerical analyses of the unsaturated drained triaxial laboratory tests.  相似文献   

广西栗木锡钨铌钽矿床岩浆液态不混溶作用及其与矿化的关系     

王艳丽  彭齐鸣  祝新友  程细音  傅其斌  杨毅 《地质与勘探》2013,(6):1046-1055

锡钨多金属矿化多与Li-F碱长花岗岩有关,其岩浆演化晚期常发生较大规模的液态分异作用。广西栗木锡钨铌钽矿与成矿有关的岩体包括肉红色中粒碱长花岗岩以及顶部的白色细粒碱长花岗岩。矿化产于碱长花岗岩顶部附近,主要矿化类型包括花岗岩型钨锡铌钽矿化、似伟晶岩型钨矿化、长石石英脉型钨矿化和石英脉型钨锡矿化。碱长花岗岩中存在大量岩浆液态不混溶现象,包括矿囊、似伟晶岩和细晶岩等。地质地球化学研究发现,岩浆液态不混溶作用贯穿于栗木碱长花岗岩分异演化的全过程,矿囊代表岩体中富含钨锡和挥发份的岩浆,岩体顶部的似伟晶岩和细晶岩是碱长花岗岩岩浆分异的结果。在岩浆液态不混溶作用过程中,W、Sn、Nb、Ta等成矿元素以及挥发份不断富集,形成岩浆岩型、长英质脉型以及石英脉型矿化。不同类型的矿化对应岩浆液态不混溶作用的不同阶段,由此建立了栗木矿床岩浆液态不混溶的成矿演化模型。  相似文献   

The origin of the Maozu carbonate-hosted Pb–Zn deposit,southwest China: Constrained by C–O–S–Pb isotopic compositions and Sm–Nd isotopic age     

《Journal of Asian Earth Sciences》2013

The Maozu Pb–Zn deposit, located on the western margin of the Yangtze Block, southwest China, is a typical carbonate-hosted deposit in the Sichuan–Yunnan–Guizhou Pb–Zn metallogenic province with Pb + Zn reserves of about 2.0 million tonnes grading 4.15 wt.% Pb and 7.25 wt.% Zn. Its ore bodies are hosted in Sinian (635–541 Ma) Dengying Formation dolostone and show stratiform, vein and irregular textures. Ores are composed of sphalerite, galena, pyrite, calcite, dolomite, quartz and fluorite with massive, banded, disseminated and veined structures. The C–O–Sm–Nd isotopic compositions of hydrothermal calcites and S–Pb isotopic compositions of sulfides were analyzed to constrain the origin of the Maozu deposit. δ¹³C_PDB and δ¹⁸O_SMOW values of hydrothermal calcites range from −3.7‰ to −2.0‰ and +13.8‰ to +17.5‰, respectively, and plot near the marine carbonate rocks field in a plot of δ¹³C_PDB vs. δ¹⁸O_SMOW, with a negative correlation. It suggests that CO₂ in the hydrothermal fluids was mainly originated from marine carbonate rocks, with limited influence from sedimentary organic matter. δ³⁴S_CDT values of sulfides range from +9.9‰ to +19.2‰, similar to that of Cambrian to Triassic seawater sulfate (+15‰ to +35‰) and evaporate (+15‰ to +30‰) in the Cambrian to Triassic sedimentary strata. It suggests that reduced sulfur was derived from evaporate in sedimentary strata by thermo chemical sulfate reduction. Sulfides have low radiogenic Pb isotope compositions (²⁰⁶Pb/²⁰⁴Pb = 18.129–18.375, ²⁰⁷Pb/²⁰⁴Pb = 15.640–15.686 and ²⁰⁸Pb/²⁰⁴Pb = 38.220–38.577) that plot in the field between upper crust and the orogenic belt evolution curve in the plot of ²⁰⁷Pb/²⁰⁴Pb vs. ²⁰⁶Pb/²⁰⁴Pb, and similar to that of age corrected Proterozoic basement rocks (Dongchuan and Kunyang Groups). This indicates that ore-forming metals were mainly derived from basement rocks. Hydrothermal calcite yields a Sm–Nd isotopic age of 196 ± 13 Ma, possibly reflecting the timing of Pb–Zn mineralization in the SYG province, younger than the Permian Emeishan mantle plume (∼260 Ma). All data combined suggests that hydrothermal fluids circulated through basement rocks where they picked up metals and migrated to surface, mixed with reduced sulfur-bearing fluids and precipitated metals. Ore genesis of the Maozu deposit is different from known magmatic–hydrothermal, Sedimentary Exhalative or Mississippi Valley-types, which maybe represent a unique ore deposit type, named as the SYG-type.  相似文献