亚像素定位的关键问题研究   总被引：1，自引：0，他引：1  

王成亮  邹峥嵘  闾海庆  王静 《海洋测绘》2007,27(1):70-73

分析了控制点标志的选择与设计,采用了图像处理、Hough变换、角点与直线高精度定位算子等方法,实现了中南大学近景摄影测量二维控制场1 350个人工标志点的自动识别和亚像素定位,仿真图检测平均精度达到±0.05像素。  相似文献   

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin   总被引：1，自引：1，他引：1  

Michael Riedel 《Marine Geophysical Researches》2007,28(4):355-371

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.  相似文献   

3D gravity modelling for Anyongbok Seamount in the East Sea     

Moo Hee Kang  Hyun-Chul Han  Hyesu Yun  Gee Soo Kong  Kyong O. Kim  Youn Soo Lee 《Marine Geophysical Researches》2007,28(3):257-269

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.  相似文献   

Modelling morphological processes in the vicinity of shore-parallel breakwaters     

Julio A. Zyserman  Hakeem K. Johnson 《Coastal Engineering》2002,45(3-4)

  相似文献   

6-DMAP诱导缢蛏三倍体的研究     

李德祥  李太武  苏秀榕  林志华  柴雪良  方军 《台湾海峡》2006,25(3):396-401

用6-DMAP抑制受精卵第二极体排放的方法诱导缢蛏三倍体的试验．结果表明：6-DMAP在100～500μmol／dm^3处理浓度范围内均可以诱导出三倍体，随着药物处理浓度和处理时间的提高，三倍体倍化率和D形幼虫畸形率有不同程度的提高，而D形幼虫孵化率会随之下降．综合来看，在30％卵子受精并出现第一极体，6-DMAP浓度为300μmol／dm^3和处理持续时间为20min时的处理组的处理效果优于其他处理组组合．  相似文献   

基于多源数据的三维城市建模方法     

叶秋果  滕惠忠  郭思海  李军  辛宪会 《海洋测绘》2006,26(6):62-64

以天津新港三维城市建模为例,介绍了基于二维数据、DEM和3D模型等多源数据的三维城市建模的方法和关键技术。为有效利用现有数据资源快速、准确建立三维城市模型提供了一种经济、灵活、省时、高效的方法。  相似文献   

Design of a 3D Chirp Sub-bottom Imaging System     

Jonathan M. Bull  Martin Gutowski  Justin K. Dix  Timothy J. Henstock  Peter Hogarth  Timothy G. Leighton  Paul R. White 《Marine Geophysical Researches》2005,26(2-4):157-169

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.  相似文献   

三维符号构成及建模方法研究   总被引：3，自引：0，他引：3  

许敏  刘宁  丛凤波 《海洋测绘》2006,26(2):45-48

随着计算机软硬件技术和三维可视化技术的快速发展,二维平面电子地图正在向直观、形象的三维电子地图方向过渡,而原来的二维地图符号已难以满足三维场景逼真性的要求,它必然要求与之配套的三维符号理论和技术的产生。由于三维符号如何构成及怎样标注尚无标准可遵循,在对三维符号的构成、分类及建模方法进行分析的基础上,提出了实体模型符号的两种建模方法,实验表明它们切实可行,能较好地表达三维实体模型。  相似文献   

不同生长期坛紫菜多糖中组分含量的变化   总被引：3，自引：0，他引：3  

高洪峰  纪明候  曹文达 《海洋与湖沼》1994,25(5):505-509

于１９９０－１９９１年，运用＾１３Ｃ－ＮＭＲ和化学分析方法研究南方产和移植北方养殖的不同生长发育阶段坛紫菜多糖的组分变化，结果表明，随着藻体生长发育，坛紫菜琼胶中３，６－内醚－Ｌ－半乳糖和６－ＯＣＨ３－Ｄ－半乳糖的含量逐渐增加，而硫酸基的含量呈现先增加后减少的规律；北移坛紫菜琼胶中３，６－内醚－Ｌ－半乳糖的含量高于南方坛紫菜，而硫酸基和６－ＯＣＨ３－Ｄ－半乳糖的含量低于南方坛紫菜。  相似文献   

合浦珠母贝二倍体、三倍体和非整倍体群体的基因杂合度与生长比较   总被引：6，自引：0，他引：6  

何毛贤  沈琪  林岳光  姜卫国  潘金培 《热带海洋学报》2002,21(4):55-62

采用淀粉凝胶电泳方法对合浦珠母贝Pinctadamartensi(D.)雌性三倍体与雄性二倍体交配,细胞松弛素B抑制其受精卵第一极体释放产生的二倍体、三倍体及非整倍体3个群体进行了同工酶研究。二倍体、三倍体及非整倍体群体在6个多态位点的平均基因杂合度分别为0.255±0.087,0.286±0.097,0.275±0.089,三倍体的杂合度高出二倍体约12%,表明多倍体诱导能增加诱导群体的杂合度。但在单个位点上,三倍体的杂合度不一定高于二倍体;在各自群体内,平均杂合位点数与生长间无明显的相关性,单个位点上的杂合子也未完全表现出其生长大于纯合子,且差异不明显(p>0.05)。因此,合浦珠母贝三倍体的快速生长难以完全用杂合度增高假说解释,只能说明诱导处理能使三倍体的杂合度增高,而能量再分配和"巨型性"可能对其快速生长起着不可忽视的作用。非整倍体群体的杂合度高于二倍体群体,但其生长却小于二倍体,其原因可能是染色体的增减对机体的生长有一定的影响。  相似文献