机载激光雷达平均树高提取研究   总被引：16，自引：3，他引：13  

庞勇  赵峰  李增元  周淑芳  邓广  刘清旺  陈尔学 《遥感学报》2008,12(1):152-158

为了研究机载激光雷达(LiDAR)树高提取技术,以山东省泰安市徂徕山林场为实验区,于2005年5月进行了机载LiDAR数据获取和外业测量.通过对LiDAR点云数据的分类处理,分别得到了试验区的地面点云子集、植被点云子集和高程归一化的植被点云子集.基于高程归一化的植被点云子集计算了上四分位数处的高度,与实地测量的数据进行了比较,并结合中国森林调查规程进行了实用性分析.结果表明:对于较低密度的点云数据,使用分位数法可以较好地进行林分平均高的估计;机载激光雷达技术对树高估计是可行的,精度都高于87%,总体平均精度为90.59%,其中阔叶树的精度高于针叶树.该试验精度可以满足中国二类森林调查规程中平均树高因子的一般商品林和生态公益林的精度要求,对国有商品林小班的调查精度要求(5%)存在一点差距,需要在国有商品林区进一步开展验证工作.对本试验区而言,已经可以满足其作为森林公园生态公益林的调查要求.  相似文献   

利用LiDAR技术生产真3维电子地形图的研究     

韩文泉  侯兆泰  刘行波 《测绘与空间地理信息》2008,31(2):7-9

2006年3月,南京市测绘勘察研究院有限公司利用Optech公司的ALTM3100在南京市成功获取到10 km2的LiDAR数据。在此数据基础上,笔者对如何利用LiDAR技术与数据进行真3维电子地图制作进行了较为深入的研究,对其关键步骤在文中进行了阐述。最后,提出自己在城市3维建模技术方面的观点。  相似文献   

基于Windows Mobile与蓝牙GPS的辅助定位系统研究     

朱冬海 《现代测绘》2008,31(5)

本文在分析导航型GPS输出数据格式的基础上,研究了智能手机与GPS之间的蓝牙数据链以及GPS坐标系到测量坐标系的转换方法,并在此基础上进行了基于Windows Mobile的应用程序开发。实践证明,采用这种方法定位精度可以达到6～7米,能应用于测量控制点的辅助定位及其他非高精度定位的专业领域。  相似文献   

基于四叉树的LiDAR点云数据组织研究     

陈刚  张芯  张明  石宏斌 《测绘通报》2008,(11)

针对传统的数据读取方法不能满足LiDAR点云数据量大的特点,基于Windows的内存映射机制,研究LiDAR点云数据组织,利用四叉树对LiDAR点云数据进行索引管理,并在LiDAR点云的三维场景绘制中对点云数据进行剪裁,减轻CPU的负担,提高其运算的效率.  相似文献   

车载智能地理信息查询系统及其自然语言接口     

张连蓬  储美华  刘国林  江涛 《现代测绘》2005,28(1):20-22,33

车载地理查询系统涉及到多方面的软、硬件技术和数据来源；本文提出了车载系统所需具备的主要功能，并对其中所需解决的关键问题进行了讨论。特别是针对如何使车载系统具备一定的智能问题，提出了将自然语言和空间查询语句结合，构造模式库，在自然语言识别处理的基础上，完成自然语言空间查询的方法。  相似文献   

Physical disturbance creates bacterial dominance of benthic biological communities in tropical deltaic environments of the Gulf of Papua   总被引：1，自引：0，他引：1  

Josephine Y. Aller  Robert C. Aller 《Continental Shelf Research》2004,24(19):2395

Unlike many reactive continental shelf mud deposits in temperate regions, bacteria and microfauna rather than macrofauna typically dominate benthic biomass and activities over large areas of the Gulf of Papua (GoP) deltaic complex, Papua New Guinea. During mid NW monsoon periods (Jan–Feb), macrofaunal densities at Gulf stations were relatively low (), large macroinfauna were absent (upper 25 cm), and small (), surface deposit-feeding polychaetes and tubiculous amphipods were dominant, reflecting a frequently destabilized seabed and high sedimentation/erosion rates. Although frequent physical disturbance generally inhibits development of macrobenthic communities, some regions of the Gulf deposits are periodically colonized and extensively bioturbated during quiescent periods, as shown by preserved biogenic sedimentary structures. Bacterial inventories integrated over the top 20 cm were extremely variable within each sub region of the clinoform complex. A possible bimodal pattern with bathymetric depth and distance offshore may occur: lowest-inventories within the sandy, proximal Fly River delta, an open Gulf inner topset zone (10–20 m) having sites of relatively high inventories, an open Gulf mid-topset region with intermediate values and less extreme variation, and the outer topset—upper foreset zone (40–50 m) where highest values are attained (). Various measures of microbial activity, including measures proportional to the cellular rRNA content and the proportion of dividing cells, indicate extremely productive populations over the upper 1-m of the seabed throughout the Gulf of Papua region. Bacterial biomass (0–20 cm) including data of Alongi et al. (1991, 1992, 1995) varied from a low of in intertidal mud banks to a high of in the topset—foreset zone. Macrofaunal biomass did not exceed in any sampled region, ranging from 0.009±0 to with no obvious correlation with bathymetric depth (1–63 m). Meiofaunal biomass was generally an order of magnitude lower than macrofaunal biomass. Relatively elevated bacterial biomass and high turnover rates are consistent with high measured rates of benthic remineralization, presumably reflecting the rapid response time of bacteria to physical reworking, the associated entrainment of organic substrate, and flushing of metabolites. Solute exchange is also enhanced below the directly mixed surface region, possibly producing ‘far field’ stimulation of microbes in underlying deposits. Physical reworking and reoxidation of sediments between 10 and 50 m water depth maintain suboxic, nonsulfidic conditions in the upper 0.5–1 m despite active microbial communities and high benthic remineralization rates.  相似文献   

Fold-Thrust-Belt Structure of the Proterozoic Eastern Ghats Mobile Belt: A Proposed Correlation Between India and Antarctica in Gondwana     

T.K. Biswal  S. Sinha 《Gondwana Research》2004,7(1):43-56

The Proterozoic Eastern Ghats Mobile Belt along the east coast of India shares a thrusted lower contact with the surrounding cratons. The thrust, known as the Terrane Boundary shear zone, is associated with two large lateral ramps resulting in a curved outline on the northwestern corner of the mobile belt. The Eastern Ghats Mobile Belt is divided into two lithotectonic units, the Lathore Group and the Turekela Group, based on their lithological assemblages and deformational history. On the basis of published data from a Deep Seismic Sounding (DSS) profile of the Eastern Ghats crust, the Terrane Boundary Shear Zone is considered to be listric in nature and acts as the sole thrust between craton and mobile belt. The Lathore and Turekela Groups are nappes. With this structural configuration the NW part is described as a fold thrust belt. However, the thrusting postdates folding and granulite metamorphism that occurred in the Eastern Ghats, as in the Caledonide type of fold thrust belt of NW Scotland. The Terrane Boundary Shear Zone is interpreted to be contiguous with the Rayner-Napier boundary of the Enderby Land in a Gondwana assembly.  相似文献   

自动气象站雨量资料的获取与转换     

余卫东  任光辉董博 杨君健 《河南气象》2005,(4):41-42

分析了自动气象站分钟雨量资料获取与转换的必要性,介绍了雨量资料获取的思路与具体方法.通过这种方法,实现了商丘市所有自动气象站雨量资料的共享,并与GPRS、GSM乡级自动雨量站资料进行融合.  相似文献   

Exploration of remotely sensed forest structure and ultrasonic range sensor metrics to improve empirical snow models          下载免费PDF全文

Andrés Varhola  Nicholas C. Coops  Younes Alila  Markus Weiler 《水文研究》2014,28(15):4433-4448

Current methods to estimate snow accumulation and ablation at the plot and watershed levels can be improved as new technologies offer alternative approaches to more accurately monitor snow dynamics and their drivers. Here we conduct a meta‐analysis of snow and vegetation data collected in British Columbia to explore the relationships between a wide range of forest structure variables – obtained from Light Detection and Ranging (LiDAR), hemispherical photography (HP) and Landsat Thematic Mapper – and several indicators of snow accumulation and ablation estimated from manual snow surveys and ultrasonic range sensors. By merging and standardizing all the ground plot information available in the study area, we demonstrate how LiDAR‐derived forest cover above 0.5 m was the variable explaining the highest percentage of absolute peak snow water equivalent (SWE) (33%), while HP‐derived leaf area index and gap fraction (45° angle of view) were the best potential predictors of snow ablation rate (explaining 57% of variance). This study reveals how continuous SWE data from ultrasonic sensors are fundamental to obtain statistically significant relationships between snow indicators and structural metrics by increasing mean r² by 20% when compared to manual surveys. The relationships between vegetation and spectral indices from Landsat and snow indicators, not explored before, were almost as high as those shown by LiDAR or HP and thus point towards a new line of research with important practical implications. While the use of different data sources from two snow seasons prevented us from developing models with predictive capacity, a large sample size helped to identify outliers that weakened the relationships and suggest improvements for future research. A concise overview of the limitations of this and previous studies is provided along with propositions to consistently improve experimental designs to take advantage of remote sensing technologies, and better represent spatial and temporal variations of snow. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

机载LiDAR地形特征信息快速提取     

刘智敏  杨安秀  宿殿鹏  刘盼 《大地测量与地球动力学》2018,38(11):1186-1190

为更有效地获取地形特征信息，提出一种机载LiDAR地形特征信息快速提取算法。首先，通过构建二次曲面拟合模型，建立实测LiDAR地形数据与拟合曲面的几何规则；然后，采用LM算法迭代参数寻优，获得最优化结果下的地形拟合参数，计算拟合时间及拟合精度；最后，以地形拟合模型为基础，进行地形特征信息的快速提取。通过机载LiDAR实测数据验证，当最优搜索半径为2 m时，地形曲面的拟合时间仅为0.02 s，RMSE仅为5.09 cm。该算法保证了地形特征信息提取效率和精度，能够有效满足机载LiDAR科学研究和工程应用的技术需求。  相似文献