大型双槽渡槽地震反应分析   总被引：3，自引：0，他引：3  

杜晓伟  陈淮  孙国钧  王博 《世界地震工程》2003,19(2):23-26

为了得到比较精确的大型双槽渡槽结构的地震反应，根据渡槽结构复杂、影响动力因素较多等特点，采用8结点空间块体单元对渡槽槽身和槽墩进行有限元离散，分别用耦合自由度和多个弹簧单元分别模拟渡槽槽身横向拉杆、加劲肋和盆式橡胶支座，建立了大型双槽渡槽结构地层反应分析的有限元模型，计算了南水北调水利工程中的双洎河大型双槽渡槽的振动特性，并分别用反应谱法和时程分析法对该渡槽进行了地震反应分析，计算结果可为该渡槽的抗震设计提供参考。  相似文献   

结构随机响应的一种改进的概率谱叠加方法     

孙凌  吴知丰  周成功  周生震 《世界地震工程》2003,19(2):156-162

目前有一些关于多自由度结构体系的地震响应中响应峰值按降序(即由大到小的顺序)排列时的峰值统计性质的研究。本文对这些研究中的概率方法提出一些改进。由于这些改进，概率谱叠加方法在实际应用中就变得更准确和实用。本文以五层的结构模型为例，计算其在埃尔森特罗(1940)地震激励下的响应，并与时程分析结果进行比较。结果表明，改进的概率谱叠加方法能够谁确的计算较高几阶重要响应峰值的幅值。  相似文献   

基于脉冲频响函数的MATLAB动力方程求解方法   总被引：3，自引：0，他引：3  

马乐为  吴敏哲  谢异同 《世界地震工程》2003,19(2):168-171

提出一种基于脉冲频响函数并利用MATLAB求解的方法，由于脉冲频响函数利用卷积公式进行动力微分方法计算，因此，从理论上讲，它适合于任意外力下的动力方程求解，同时，MATAL又提供了卷积函数conv，所以，在MATLAB下求解动力方程将变得十分容易。  相似文献   

美国城市搜索与救援体系的组成及运作模式概述     

顾建华  张洪由  彭晋川 《国际地震动态》2003,(12):11-16

美国城市搜索与救援体系是世界上最完善的体系之一，多年来在城市救灾和应对突发事件中发挥了重要作用，减轻了生命和财产的损失。文章概述了美国城市搜索与救援体系的组成、任务、运作原则和管理机构及支援机构。  相似文献   

New national seismic zoning map of China     

高孟潭 《地震学报(英文版)》2003,16(6):639-645

1 Background of the new national seismic zoning map The policy of seismic disaster mitigation in the Chinese mainland is prevention first. According to the law, the earthquake design for ordinary structures must fit the demand of national seismic zoning map. Seismic zoning map is the basis of the earthquake design (TANG, 1998; WU, et al, 1998). The seismic zoning map must be updated with the progress in methodology and accumula-tion of the data. There are three generations of national seis…  相似文献   

Decoupled seismic analysis of an earth dam   总被引：2，自引：0，他引：2  

Ernesto Cascone  Sebastiano Rampello 《Soil Dynamics and Earthquake Engineering》2003,23(5):349-365

The seismic stability of an earth dam is evaluated via the decoupled displacement analysis using the accelerograms obtained by ground response analysis to compute the earthquake-induced displacements. The response analysis of the dam is carried out under both 1D and 2D conditions, incorporating the non-linear soil behaviour through the equivalent linear method. Ten artificial and five real accelerograms were used as input motions and four different depths were assumed for the bedrock.1D and 2D response analyses were in a fair agreement with the exception of the top third of the dam where only a 2D modelling of the problem could ensure that the acceleration field is properly described. The acceleration amplification ratio obtained in the 2D analyses was equal to about 2 in all the cases considered, consistently with data from real case histories.The maximum permanent displacements computed by the sliding block analysis were small, being less than 10% of the service freeboard; a satisfactory performance of the dam can then be envisaged for any of the seismic scenarios considered in the analyses.  相似文献   

Scattering of elastic waves by a general anisotropic basin. Part 2: a 3D model     

Marijan Dravinski 《地震工程与结构动力学》2003,32(5):653-670

Scattering of plane harmonic waves by a three‐dimensional basin of arbitrary shape embedded within elastic half‐space is investigated by using an indirect boundary integral equation approach. The materials of the basin and the half‐space are assumed to be the most general anisotropic, homogeneous, linearly elastic solids without any material symmetry (i.e. triclinic). The unknown scattered waves are expressed in terms of three‐dimensional triclinic time harmonic full‐space Green's functions. The results have been tested by comparing the surface response of semi spherical isotropic and transversely isotropic basins for which the numerical solutions are available. Surface displacements are presented for a semicircular basin subjected to a vertical incident plane harmonic pseudo‐P‐, SV‐, or SH‐wave. These results are compared with the motion obtained for the corresponding equivalent isotropic models. The results show that presence of the basin may cause significant amplification of ground motion when compared to the free‐field displacements. The peak amplitude of the predominant component of surface motion is smaller for the anisotropic basin than for the corresponding isotropic one. Anisotropic response may be asymmetric even for symmetric geometry and incidence. Anisotropic surface displacement generally includes all three components of motion which may not be the case for the isotropic results. Furthermore, anisotropic response strongly depends upon the nature of the incident wave, degree of material anisotropy and the azimuthal orientation of the observation station. These results clearly demonstrate the importance of anisotropy in amplification of surface ground motion. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

A unified formulation of the piecewise exact method for inelastic seismic demand analysis including the P‐delta effect     

M. N. Ayd&#x;nolu  Y. M. Fahjan 《地震工程与结构动力学》2003,32(6):871-890

The non‐linear analysis of single‐degree‐of‐freedom (SDOF) systems provides the essential background information for both strength‐based design and displacement‐based evaluation/design methodologies through the development of the inelastic response spectra. The recursive solution procedure called the piecewise exact method, which is efficiently used for the response analysis of linear SDOF systems, is re‐formulated in this paper in a unified format to analyse the non‐linear SDOF systems with multi‐linear hysteresis models. The unified formulation is also capable of handling the P‐delta effect, which generally involves the negative post‐yield stiffness of the hysteresis loops. The attractiveness of the method lies in the fact that it provides the exact solution when the loading time history is composed of piecewise linear segments, a condition that is perfectly satisfied for the earthquake excitation. Based on simple recursive relationships given for positive, negative and zero effective stiffnesses, the unified form of the piecewise exact method proves to be an extremely powerful and probably the best tool for the SDOF inelastic time‐history and response spectrum analysis including the P‐delta effect. A number of examples are presented to demonstrate the implementation of the method. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

A rooftop tuned mass damper frame     

Jerod G. Johnson  Lawrence D. Reaveley  Chris Pantelides 《地震工程与结构动力学》2003,32(6):965-984

This article documents the analytical study and feasibility of placing a tuned mass damper in the form of a limber rooftop moment frame atop relatively stiff structures to reduce seismic acceleration response. Six existing structures were analytically studied using a suite of time history and response spectra records. The analyses indicate that adding mass in conjunction with a limber frame results in an increase in the fundamental period of each structure. The fundamental period increase generally results in a decrease in seismic acceleration response for the same time history and response spectra records. Owing to the limber nature of the rooftop frames, non‐linear analysis methods were required to evaluate the stability of the rooftop tuned mass damper frame. The results indicate the addition of a rooftop tuned mass damper frame reduces the seismic acceleration response for most cases although acceleration response can increase if the rooftop frame is not tuned to accommodate the specific structure's dynamic behaviour and localized soil conditions. Appropriate design of the rooftop tuned mass damper frame can result in decreased seismic acceleration response. This translates to safer structures if used as a retrofit measure or a more economical design if used for new construction. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Statistical performance analysis of seismic‐excited structures with active interaction control     

Yunfeng Zhang  Wilfred D. Iwan 《地震工程与结构动力学》2003,32(7):1039-1054

This paper presents a statistical performance analysis of a semi‐active structural control system for suppressing the vibration response of building structures during strong seismic events. The proposed semi‐active mass damper device consists of a high‐frequency mass damper with large stiffness, and an actively controlled interaction element that connects the mass damper to the structure. Through actively modulating the operating states of the interaction elements according to pre‐specified control logic, vibrational energy in the structure is dissipated in the mass damper device and the vibration of the structure is thus suppressed. The control logic, categorized under active interaction control, is defined directly in physical space by minimizing the inter‐storey drift of the structure to the maximum extent. This semi‐active structural control approach has been shown to be effective in reducing the vibration response of building structures due to specific earthquake ground motions. To further evaluate the control performance, a Monte Carlo simulation of the seismic response of a three‐storey steel‐framed building model equipped with the proposed semi‐active mass damper device is performed based on a large ensemble of artificially generated earthquake ground motions. A procedure for generating code‐compatible artificial earthquake accelerograms is also briefly described. The results obtained clearly demonstrate the effectiveness of the proposed semi‐active mass damper device in controlling vibrations of building structures during large earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献