水平井含水率上升影响因素   总被引：1，自引：1，他引：0  

凌宗发  王丽娟  李保柱  夏静  朱玉新 《现代地质》2008,22(1):86-90

利用塔里木油田塔中4油田(TZ4)底水油藏相关的地质、流体数据建立数值模型。在所建模型的基础上,应用数值模拟计算的累积产油、产水和产液量回归俞启泰水驱特征曲线,以反映水平井见水特征的参数b。以参数b为研究对象,采用正交试验的方法研究不同因素对b值的影响,筛选影响水平井见水特征的主要因素,认为原油粘度、油层厚度、非均质性及水平井水平段在油藏中的位置是影响水平井含水上升趋势的主要指标。最后建立主要因素与b值的关系式,结合俞启泰曲线b值图版,提出预测水平井见水规律的公式——图版法(F-b法)。应用F-b法对塔里木水平井含水率进行预测,并与其他相关方法及实际生产数据对比,认为F-b法可作为预测塔里木油田水平井含水率、估算可采储量的一种有效方法。  相似文献   

火山沉积岩及其矿床研究中伽马测井曲线解释的误区     

冯宝华 《物探与化探》2008,32(2):171-174

根据酸性凝灰岩和酸性火山事件粘土岩的自然伽马测井曲线,对当前流传的"沉积岩层的放射性强度(或放射性核素的含量)随泥质含量的增加而增高"的概念和用自然伽马值及经验公式求泥质含量提出质凝。酸性凝灰岩的自然伽马曲线有高异常响应,若解释为泥岩显然是误解,故将沉积岩伽马曲线高异常一律解释为泥岩是片面的。各类火山事件粘土岩的伽马值相差悬殊,但其泥质含量几乎相等,用它们的伽马值计算泥质含量误差甚大。最后对铝土矿层的伽马曲线稍加解释,指出核测井应用的远景。  相似文献   

发挥自身优势 扩大经营 走探采一体化道路     

文怀军 《中国煤炭地质》2008,20(2):70-71

煤炭地质勘查单位,通过几十年的艰苦奋斗,不仅为国家找出了大量的煤炭资源,同时也积累了丰富的管理、施工和技术工作经验,以及大量的地质资料。应该发挥自身优势,充分利用大量的以往地质资料,结合新的找矿理论和先进的地面勘查手段,加大人才培养和引进力度,逐步提升专业技术人员的学识和科技水平,加强基础地质工作,不断寻找新的工作靶区,把握住煤炭勘查市场的主动权。抓住机遇,做好资金积累,加强资本运做,充分利用已有探矿权,走探采一体化道路,做精做强到做大地勘单位,是生存和发展的良好出路。  相似文献   

Using Sequential Self-Calibration Method to Identify Conductivity Distribution: Conditioning on Tracer Test data     

Bill X. Hu  Changming He 《Mathematical Geosciences》2008,40(8):845-859

An iterative inverse method, the sequential self-calibration method, is developed for mapping spatial distribution of a hydraulic conductivity field by conditioning on nonreactive tracer breakthrough curves. A streamline-based, semi-analytical simulator is adopted to simulate solute transport in a heterogeneous aquifer. The simulation is used as the forward modeling step. In this study, the hydraulic conductivity is assumed to be a deterministic or random variable. Within the framework of the streamline-based simulator, the efficient semi-analytical method is used to calculate sensitivity coefficients of the solute concentration with respect to the hydraulic conductivity variation. The calculated sensitivities account for spatial correlations between the solute concentration and parameters. The performance of the inverse method is assessed by two synthetic tracer tests conducted in an aquifer with a distinct spatial pattern of heterogeneity. The study results indicate that the developed iterative inverse method is able to identify and reproduce the large-scale heterogeneity pattern of the aquifer given appropriate observation wells in these synthetic cases.  相似文献   

松辽盆地宋芳屯油田扶杨油层孔隙结构及其影响因素     

胡霞  黄得利  李照勇 《上海国土资源》2008,(1):60-62

通过镜下观察,宋芳屯油田扶杨油层孔隙类型较多,以粒间孔为主。细管压力曲线上看,曲线较陡,分选差,孔隙结构特征参数总体上较差,与孔隙度、渗透率有一定的关系,大的孔隙对渗透率的贡献最大。扶杨油层的孔隙结构较复杂主要由于成岩作用影响,压实作用使孔隙空间显著缩小,胶结作用和自生粘土矿物生长使孔隙进一步缩小和复杂化,后期的溶蚀作用使孔隙空间增加。  相似文献   

饱和软土压缩曲线的“反常”现象     

冯铭璋  王兴涛 《上海国土资源》1990,(3):30-37

饱和软土压缩试验时,经常出现压缩曲线“反常”、压缩系数“倒大”的现象。它是土的原始结构发生破坏前后的不同压缩性的客观反映。饱和软土的结构力很微弱,唯质量好的原状土才能见到这种“反常”。应从成孔、取样、测试及资料整理等多个环节保证其工程意义。  相似文献   

Uniaxial compression and tension tests of anthracite and loading rate dependence of peak strength   总被引：2，自引：0，他引：2  

S. Okubo  K. Fukui  Qi Qingxin 《International Journal of Coal Geology》2006,68(3-4):196-204

The mechanical characteristics of coal under uniaxial compressive stress and uniaxial tensile stress are key factors in investigations of the stability of galleries and coal faces, and are vital considerations for the efficient design of coalmines, disaster prevention, and environmental preservation. These mechanical characteristics have long been a topic of research, but remain insufficiently understood. In this study we performed uniaxial compression tests and uniaxial tension tests on coal, with particular attention to two concerns. The first was to measure the loading rate dependence of the peak strength of coal. Coal shows high sample-to-sample scatter in strength; test methods that are successful in comparatively homogeneous rock types cannot be used for coal. We therefore used an alternative test method that was recently developed by the authors. Anthracite samples were subjected to alternating slow and fast strain rates. Measured variations in stress during this process were used to estimate the loading rate dependence of peak strength. The second objective was to obtain complete stress–strain curves for coal under uniaxial tensile stress. It is difficult to hold samples secure during a tensile test; consequently, such curves have yet to be obtained. This study presents a successful application of the authors' method to the analysis of coal samples, yielding a complete stress–strain curve under tensile stress. The two methods presented here hold promise for application not only to anthracite but also to a wide variety of coals. It is possible to derive the values of the constants used in constitutive equations from the obtained experimental results. Once these equations are determined, they can be incorporated into finite-element software to investigate various time-dependent behaviors of coal and aid in the efficient design of coalmines and the prevention of subsidence and mine disasters.  相似文献   

Study on the Fragility of Building Structures in Taiwan     

Wen-I Liao  Chin-Hsiung Loh  Keh-Chyuan Tsai 《Natural Hazards》2006,37(1-2):55-69

  相似文献   

高光谱遥感数据三次光滑样条滤噪   总被引：6，自引：1，他引：6  

路威  余旭初刘娟 《测绘学院学报》2005,22(1):11-13,16

分析了高光谱遥感数据噪声滤波的作用和现状，实现了一种基于三次光滑样条函数的高光谱遥感数据噪声滤波算法，解决了目前高光谱遥感数据噪声滤波算法自适应效果不理想的问题。通过对AVIRIS数据试验，证明此方法简单易行，计算精度高，具有良好的局部自适应拟合能力，并能有效地滤除数据中的噪声，改善数据质量。  相似文献   

自由测站法曲线座标计算程序设计     

李云 《四川测绘》2005,28(4):180-183

通过对曲线测设和测点坐标计算过程的分析，把坐标计算的程序设计归结为有向直线与X轴顺时针夹角即方位角的计算和线路转向转角的计算，弥补了测点位置和计算公式分类复杂等不足，简化了程序设计和计算过程。  相似文献