岩层离距图法研究沉积岩断裂发育史——以松辽盆地敖古拉断裂为例     

雷茂盛  林静薇 《海相油气地质》2004,(Z1)

利用断裂活动过程中留下的各种地质标记研究断裂发育史是比较困难的 ,已有的研究方法主要可归纳出七种 ,都存在局限性。岩层离距图法是以地震剖面为基础 ,将穿过断裂的各剖面上的标志层投影到沿断裂走向的铅垂面上 ,得到多组标志层的垂向断距数据 ,然后用下部各标志层的断距减去最上部标志层的断距 ,并作多轮次计算 ,直到最后的断距差近似为零或仅剩一个非零标志层。每一轮次计算代表一个活动期次 ,如果出现负值 ,则表示有构造反转。对松辽盆地敖古拉断裂作了实例计算 ,结果为该断裂发育经历了三个正断活动期和一个逆断活动期 ,与盆地区域性活动有些差别。岩层离距图法比起其他已有方法 ,可靠程度大大提高  相似文献   

基于三角形网格的气象场等值线自动分析   总被引：2，自引：3，他引：2  

陈剑孔玉寿  李汇军 《气象科技》2004,32(2):116-119

针对矩形网格法的不足，提出了用三角形网格法实现气象场等值线自动分析方法。通过对站点资料的边界插值、三角形剖分等处理后，再在剖分出来的三角形网格中按照一定方式连接等值线即可实现等值线的自动分析。给出了等值线自动生成算法，并将实例的分析结果同Grads绘制图进行对比分析。结果表明，该方法不仅有效可行，而且分析的结果更为精确合理。  相似文献   

利用屏幕截取技术制作人降作业炮点环境示意图     

黄晓辉 《气象研究与应用》2004,25(4):41-43

介绍利用屏幕截取技术制作人降作业炮点四周环境坐标示意图的方法。  相似文献   

区域滑坡泥石流灾害预警理论与方法研究   总被引：39，自引：4，他引：39  

刘传正 《水文地质工程地质》2004,31(3):1-6

根据数年来的调查观测研究和工作实践,提出了滑坡泥石流灾害的预警分类体系,包括按物理参量划分的空间、时间与强度预警和按诱发因素参量划分的气象、地震与人类活动预警以及多参数、多因素共同作用下的综合预警。初步创建了区域性滑坡泥石流灾害暴发的两种预警理论方法,一种是基于临界过程降雨量判据图的预警方法;另一种是基于GIS的地质环境空间分析预警理论方法,通过计算预警区的滑坡泥石流灾害"发育度"、"潜势度"、"危险度"和"危害度"来实现。阐述了滑坡泥石流灾害预警的技术和行政工作程序,指出建立临界过程降雨量判据与地质环境空间分析相耦合的滑坡泥石流灾害预警理论方法是研究的新方向。  相似文献   

在MAPGIS下快速实现柱状剖面图的绘制   总被引：4，自引：0，他引：4  

李沙园  陈昕华  戈永怡 《物探化探计算技术》2004,26(2):173-176

将油气化探数据用FORTRAN短程序生成MAPGIS点、线、面明码文件后，再利用MAPGIS图形编辑软件对图形进行编辑加工，达到快速制作油气化探柱状剖面图的目的。使用该方法能充分利用MAPGIS系统资源，降低编制绘图程序的难度。  相似文献   

Aeolian abrasion and modes of fine particle production from natural red dune sands: an experimental study   总被引：3，自引：0，他引：3  

Joanna E. Bullard  Grant H. McTainsh†  Christa Pudmenzky† 《Sedimentology》2004,51(5):1103-1125

A series of experiments was conducted to determine the potential for aeolian abrasion of natural dune sands to produce fine particles (< 125 µm) by (1) the release of resident fines; (2) spalling, chipping and breakage of particles; and (3) the removal of grain surface coatings. Parent samples were obtained from the surfaces of four active continental dunes and abraded using a glass ‘test tube’ chamber for up to 120 h. The fine particles produced by this abrasion process were trapped at varying time intervals and subject to detailed particle‐size analyses using a Coulter Multisizer. The abrasion of untreated parent samples produced fine particles in one of two main size classes, < 10 µm and > 50 µm, but when the parent sample was sieved to exclude particles < 250 µm, relatively more material in the range 10–50 µm was produced. For unsieved parent samples, the size range associated with the dominant mode varied according to the length of the abrasion time. The coarsest mode (> 63 µm) was dominant during the first 16 h of abrasion, then became less significant and is thought to be associated with the release of resident fines into suspension. The finest mode (< 10 µm) was absent or very weak during the first 16 h of abrasion, then became more significant and, in some instances, dominated the distribution as abrasion continued. Removal of grain surface coatings is the main source of fine material < 10 µm, and this may be a significant source of fine material in areas where sands are dominated by subrounded and rounded particles. By comparison with previous studies of aeolian particle abrasion, these natural dune sands produced very low quantities of fine material (by weight), but their spatial extent makes them potentially a significant source of dust‐sized particles at the global scale.  相似文献   

管井降水技术在多种含水介质基坑工程中的应用          下载免费PDF全文

曹凤学  原波  杨冬  何世鸣 《探矿工程》2004,31(8):8-11

结合蚌埠城市中心广场会展中心工程，介绍了管井降水技术在多种含水介质的复杂地质环境下的应用。  相似文献   

The alluvial architecture of a suspended sediment dominated meandering river: the Río Bermejo,Argentina          下载免费PDF全文

Gregory H. Sambrook Smith  James L. Best  Jessica Z. Leroy  Oscar Orfeo 《Sedimentology》2016,63(5):1187-1208

The alluvial architecture of fine‐grained (silt‐bed) meandering rivers remains poorly understood in comparison to the extensive study given to sand‐bed and gravel‐bed channels. This paucity of knowledge stems, in part, from the difficulty of studying such modern rivers and deriving analogue information from which to inform facies models for ancient sediments. This paper employs a new technique, the parametric echosounder, to quantify the subsurface structure of the Río Bermejo, Argentina, which is a predominantly silt‐bed river with a large suspended sediment load. These results show that the parametric echosounder can provide high‐resolution (decimetre) subsurface imaging from fine‐grained rivers that is equivalent to the more commonly used ground‐penetrating radar that has been shown to work well in coarser‐grained rivers. Analysis of the data reveals that the alluvial architecture of the Río Bermejo is characterized by large‐scale inclined heterolithic stratification generated by point‐bar evolution, and associated large‐scale scour surfaces that result from channel migration. The small‐scale and medium‐scale structure of the sedimentary architecture is generated by vertical accretion deposits, bed sets associated with small bars, dunes and climbing ripples and the cut and fill from small cross‐bar channels. This style of alluvial architecture is very different from other modern fine‐grained rivers reported in the literature that emphasize the presence of oblique accretion. The Río Bermejo differs from these other rivers because it is much more active, with very high rates of bank erosion and channel migration. Modern examples of this type of highly active fine‐grained river have been reported rarely in the literature, although ancient examples are more prevalent and show similarities with the alluvial architecture of the Río Bermejo, which thus represents a useful analogue for their identification and interpretation. Although the full spectrum of the sedimentology of fine‐grained rivers has yet to be revealed, meandering rivers dominated by lateral or oblique accretion probably represent end members of such channels, with the specific style of sedimentation being controlled by grain size and sediment load characteristics.  相似文献   

Design principles for origin-destination flow maps     

Bernhard Jenny  Daniel M. Stephen  Ian Muehlenhaus  Brooke E. Marston  Ritesh Sharma  Eugene Zhang 《制图学和地理信息科学》2018,45(1):62-75

Origin-destination flow maps are often difficult to read due to overlapping flows. Cartographers have developed design principles in manual cartography for origin-destination flow maps to reduce overlaps and increase readability. These design principles are identified and documented using a quantitative content analysis of 97 geographic origin-destination flow maps without branching or merging flows. The effectiveness of selected design principles is verified in a user study with 215 participants. Findings show that (a) curved flows are more effective than straight flows, (b) arrows indicate direction more effectively than tapered line widths, and (c) flows between nodes are more effective than flows between areas. These findings, combined with results from user studies in graph drawing, conclude that effective and efficient origin-destination flow maps should be designed according to the following design principles: overlaps between flows are minimized; symmetric flows are preferred to asymmetric flows; longer flows are curved more than shorter or peripheral flows; acute angles between crossing flows are avoided; sharp bends in flow lines are avoided; flows do not pass under unconnected nodes; flows are radially distributed around nodes; flow direction is indicated with arrowheads; and flow width is scaled with represented quantity.  相似文献   

1：100万图号中行号、列号正误的快速判断方法     

王宝生  顾栋材 《现代测绘》2009,32(4):24-25

针对多个县(市)、区土地调查文字材料将1:100万图号中的行、列号用错而产生严重缺陷的事实,本人认真学习了"国家基本比例尺地形图分幅和编号"的基础知识,并总结归纳出简易的快速判断正误的方法,以杜绝类似差错的发生.  相似文献