Two-Dimensional Mathematical Model of Tidal Current and Sediment for Oujiang Estnary and Wenzhou Bay   总被引：1，自引：0，他引：1  

LU  Yongjun 《中国海洋工程》2002,16(1):107-122

A 2-D mathematical model of tidal current and sediment has been developed for the Oujiang Estuary and the WenzhouBay. This model accomodates complicated features including multiple islands, existence of turbidity, and significant differ-ence in size distribution of bed material. The governing equations for non-uniform suspended load and bed load transport arepresented in a boundary-fitted orthogonal curvilinear coordinate system. The numerical solution procedures along with theirinitial conditions, boundary conditions, and movable boundary technique are presented. Strategies for computation of thecritical condition of deposition or erosion, sediment transport capacity, non-uniform bed load discharge, etc. are suggested.The model verification computation shows that, the tidal levels computed from the model are in good agreement with the fielddata at the 18 tidal gauge stations. The computed velocities and flow directions also agree well with the values measuredalong the totally 52 synchronously observed verticals distributed over 8 cross sections. The computed tidal water throughputsthrough the Huangda‘ao cross section are close to the measured data. And the computed values of bed deformation fromYangfushan to the estuary outfall and in the outer-sea area are in good agreement with the data observed from 1986 to 1992.The changes of tidal volumes through the estuary, velocities in different channels and the bed form due to the influence of thereclamation project on the Wenzhou shoal are predicted by means of this model.  相似文献   

Articulated Lifting System Modeling Based on Dynamics of Flexible Multi-Body Systems     

徐妍  冯雅丽  张文明 《中国海洋工程》2007,21(4):715-722

  相似文献   

Influence of large-diameter pipe pile driving on surrounding marine soils and adjacent submarine pipelines     

Jinzhong Dou  Zhong-Jie Zhang 《Marine Georesources & Geotechnology》2021,39(1):15-33

Abstract

With the large-scale development and utilization of ocean resources and space, it is inevitable to encounter existing submarine facilities in pile driving areas, which necessitates a safety assessment. In this article, by referring to a wharf renovation project as a reference, the surrounding soil response and buried pipe deformation during pile driving in a near-shore submarine environment are investigated by three-dimensional (3D) numerical models that consider the pore water effect. Numerical studies are carried out in two different series: one is a case of a single pile focusing on the effect of the minimum plane distance of the pile–pipe, and the other is a case of double piles focusing on the effect of the pile spacing.  相似文献   

Action mechanism of geotextile-reinforced cushion under breakwater on soft ground   总被引：1，自引：0，他引：1  

Yuzhen Yu  Bingyin Zhang  Jian-Min Zhang 《Ocean Engineering》2005,32(14-15):1679-1708

Various measures including material experiments, centrifuge modeling tests and FEM numerical analyses were performed to study systematically the action mechanism of the geotextile-reinforced cushion under breakwater on soft ground and the effects of the strata characterization and the reinforcement condition on the stability of the breakwater-ground system. In the aspect of controlling the deformation, the geotextile-reinforced cushion under breakwater constrains the lateral displacement of both the embankment and the ground. From the viewpoint of stress, the reinforcement suppressed the range of high stress level in the system. In general, the weaker the ground is and the greater the modulus of the geotextile is, the more effective the reinforcement is. The tensile force in the geotextile is greater in the range of the main part of the embankment.  相似文献   

Tectonic Significance of the Taitung Canyon, Huatung Basin, East of Taiwan     

Jean-Claude Sibuet  Shu-Kun Hsu  Alain Normand 《Marine Geophysical Researches》2004,25(1-2):95-107

Since the beginning of formation of Proto-Taiwan, the subducting Philippine (PH) Sea plate has moved continuously through time in the N307° direction with respect to Eurasia (EU), tearing the EU plate. The subducting EU plate includes a continental part in the north and an oceanic part in the south. The boundary B between these two domains corresponds to the eastern prolongation of the northeastern South China Sea ocean-continent transition zone. In the Huatung Basin (east of Taiwan), the Taitung Canyon is N065° oriented and is close and parallel to B. Seismic profiles show that the southern flank of the canyon corresponds to a fault with a normal component of a few tens of meters in the sediments and possible dextral shearing. Several crustal earthquakes of magnitude >%6 are located beneath the trend of the Taitung Canyon and focal mechanisms suggest that the motion is right-lateral. Thus, faulting within the sedimentary sequence beneath the Taitung Canyon is a consequence of underlying dextral strike-slip crustal motions. As the continental part of the EU slab located north of B has been recently detached, some subsequent dextral strike-slip motion might be expected within the EU slab, along the ocean-continent transition zone, which is a potential zone of weakness. We suggest that the dextral strike-slip motion along the ocean-continent boundary of the EU slab might trigger the observed dextral strike-slip motion within the overlying PH Sea crust and the associated faulting within the sediments of the Huatung Basin, beneath the Taitung Canyon. An erratum to this article is available at .  相似文献   

土工布充砂袋的应用及其研究进展   总被引：10，自引：1，他引：10  

张文斌  谭家华 《海洋工程》2004,22(2):98-104

对土工布充砂袋技术和国内外的应用进行了介绍。鉴于土工布充砂袋属于一种新兴起的土工新材料和新技术，在设计和工程实际中还存在着许多急待解决的问题，着重对各种典型状态和典型环境下的土工布充砂袋的变形、应力和土工布充砂袋堆的稳定性研究进展进行综述，最后提出进一步研究的思路。  相似文献   

软土海岸地区测量控制点标志的设立     

苏衍坤  李新国  朱绪伟  苏衍国 《海洋测绘》2007,27(3):43-47

分析了软土、湿地、滩涂地区特殊地理环境对测量控制点的影响;主要探讨了此类地区控制点标志的设计、施工。借助于建筑桩基技术和道桥施工方法,首次成功实现了某三角洲湿地滩涂地区统一布网。几年来,结合滩涂湿地测量、海岸防护和滩涂开发工程对部分控制点进行了初步检测,给出了部分检测数据。应用和检测均表明:桩基标石可较好地解决软土、湿地、滩涂地区控制点布设难题,显著提高软土海岸地区测量控制点标志的稳固性,从而延长控制网的可使用期。  相似文献   

哀牢山-红河断裂带中段应变分析   总被引：1，自引：0，他引：1  

周勇  吴世敏  周萍 《热带海洋学报》2003,22(2):17-29

对哀牢山—红河断裂带中段和平—水塘剖面、墨江—元江剖面和其它地段的岩石应变及磁组构进行了分析，表明应变强度的校正磁各向异性度PJ从断裂带向西至三叠系明显降低，变形强度向西迅速减弱。磁化率椭球体主轴展布反映出剪切带内、外变形方式的改变。剪切带内，以水平走滑运动为主；向西则以水平缩短为主。在应变分析中，对断裂带内的S—C组构两组面理夹角、杏仁体和石榴石应变标志体进行了测量，结果显示，剪切带内的磁组构和岩石组构间关系较差。此外，还对这两条剖面中的三叠系进行了应变和磁组构分析，找出了它们与磁化率椭球体对应轴率间的相关性。  相似文献   

Study on Key Technology of Using Shell Sand as Backfill for Sea Reclamation   总被引：1，自引：0，他引：1  

郦能惠瞿亦容  何文钦陈晖 《中国海洋工程》2005,19(4):647-658

1 .IntroductionEpicontinental sea or land could formfromcontinental shelf because of the decreasing sea levelduring Quaternary.There is a large-area shell sand deposit more than ten meters thick in the neriticzone of China .To use the abundant marine shell sandresource as engineering material for ocean engi-neering and port engineeringis veryimportant .Sand (Gred and Bjorn,1999) ,fine sand (Zhangetal .,2002) , mediumand coarse sand (Qiuet al .,1995) ,highly weathered stone ballast (Zhanetal…  相似文献   

智能全站仪在大型压力容器焊接变形监测中的应用     

CHEN Ji-hua  JIANG Yan-yun  HUANG Jian-hua  CHU-hu 《测绘学院学报》2008,(3)

在大型压力容器的部件焊接过程中,由于预热、焊接等工艺流程会导致各部件产生变形,从而引起部件之间的位置关系产生变化。为保证压力容器成品满足设计要求,必须在制造过程中实施变形监测,依据变形数据适当调整焊接工艺流程,控制变形量。提出采用智能全站仪配以自动变形监测软件对大型压力容器焊接变形进行实时监测,并应用于生产实践中,监测结果表明该方法自动化程度高、实时性好,能同时给出位置和姿态变形数据。  相似文献