Modification of streaming potential by precipitation of calcite in a sand–water system: laboratory measurements in the pH range from 4 to 12     

Xavier Guichet  Laurence Jouniaux  Nicole Catel 《Geophysical Journal International》2006,166(1):445-460

  相似文献   

Permeability of Hydraulic Fills and Barricade Bricks     

Nagaratnam Sivakugan  Kirralee Rankine  Rudd Rankine 《Geotechnical and Geological Engineering》2006,24(3):661-673

Permeability is one of the most important parameters in the design of hydraulic backfilling of mine stopes. A simple and reproducible method was developed for preparing reconstituted hydraulic fill sample in the laboratory, that is representative of the hydraulic fill in the mine stope, replicating the slurry sedimentation process taking place in the mine. Constant head and falling head permeability tests were carried out on the samples, giving consistent results. A brick permeameter was developed to study the flow characteristics of the porous barricade bricks under one-dimensional flow, simulating the flow conditions in the mine. Three different methods were used to determine the permeability of the brick and the results showed very good agreement. This is the first rational attempt to measure the permeability of the porous barricade bricks that are used to close the horizontal access drives in the mines, thus retaining the hydraulic fill. The measurements show that the permeability of the barricade brick is about two to three orders of magnitude greater than that of the hydraulic fill.  相似文献   

The Earthquake Readiness Scale: The Development of a Valid and Reliable Unifactorial Measure     

Matthew J. Spittal  Frank H. Walkey  John McClure  Richard J. Siegert  Kimberley E. Ballantyne 《Natural Hazards》2006,39(1):15-29

Preparedness is a key dependent variable in many studies examining people’s response to disasters such as earthquakes. A feature of many studies on this issue, however, is the lack of attention given to psychometric issues when constructing measures of preparedness. With regard to earthquake preparation, for example, many studies could be greatly improved by the use of a valid and reliable measure of preparedness. This research developed such a measure that assessed both low-level preparedness, such as having an emergency kit, and high-level preparedness, such as altering home structures to mitigate damage. Studies of Wellington (New Zealand) residents using two samples totalling n=652 showed that 23 items measuring these different aspects of earthquake preparation could be combined into a reliable, valid, unifactorial scale. This brief scale should have utility in multivariate studies of earthquake preparation, either as a dependent variable, where preparation is the outcome variable of primary interest, or as one of several independent variables, where preparation and other measures predict another outcome variable.  相似文献   

Site Investigation for the Effects of Vegetation on Ground Stability     

John R. Greenwood  Joanne E. Norris  Jo Wint 《Geotechnical and Geological Engineering》2006,24(3):467-481

The procedure for geotechnical site investigation is well established but little attention is currently given to investigating the potential of vegetation to assist with ground stability. This paper describes how routine investigation procedures may be adapted to consider the effects of the vegetation. It is recommended that the major part of the vegetation investigation is carried out, at relatively low cost, during the preliminary (desk) study phase of the investigation when there is maximum flexibility to take account of findings in the proposed design and construction. The techniques available for investigation of the effects of vegetation are reviewed and references provided for further consideration. As for general geotechnical investigation work, it is important that a balance of effort is maintained in the vegetation investigation between (a) site characterisation (defining and identifying the existing and proposed vegetation to suit the site and ground conditions), (b) testing (in-situ and laboratory testing of the vegetation and root systems to provide design parameters) and (c) modelling (to analyse the vegetation effects).  相似文献   

Fitness-for-Purpose of Reference Material Reference Values in Relation to Traceability of Measurement, as Illustrated by USGS BCR-1, NIST SRM 610 and IAEA NBS28   总被引：1，自引：0，他引：1  

Jean S. Kane 《Geostandards and Geoanalytical Research》2002,26(1):7-29

As in all fields of sample analysis, reference materials play a large role in supporting measurements in the geosciences. While a rather large number of materials are in distribution (> 380), not all are equally effective or fit-for-purpose in supporting laboratory data quality and thereby assuring the desired comparability of measurements between laboratories. Equally important, reference values that are not fit-for-purpose cannot be used effectively to establish traceability links between laboratory measurements and national and international standards. The needed fitness-for-purpose is not achieved for reference values either when more than one reference value has been proposed and a consensus does not exist among users as to which should be used by all, or when reference value uncertainties are too large in comparison to those of routine laboratory measurements. The focus of this review will be, first to outline the current reality, and second to suggest ways in which certifications of RMs can be improved to provide reference values that are universally accepted and more fit-for-purpose in general laboratory use. The discussion will be illustrated largely by current uses of USGS BCR-1, NIST SRM 610 and IAEA NBS28, as these three materials are those for which the largest body of newly published data exists, according to recent bibliographies of the geoanalytical literature published annually in Geostandards Newsletter: The Journal of Geostandards and Geoanalysis.  相似文献   

人工值守台数字化地震仪标定原理   总被引：1，自引：0，他引：1  

张海  张艺 《四川地震》2002,(3):45-48

推导了人工台数字化地震仪的分段标定公式，提出数字化记录系统的微分近似标定和拾震器阻尼衰减法标定的方法，并提供了不同短周期地震仪与数字化地震仪并行的藕合方式和标定计算公式。  相似文献   

一种计算固体潮观测数据改正值的新方法     

熊先保 《地震研究》2002,25(4):346-350

从标定前一天和标定当天的地形变前兆数据变化趋势入手，在分析当天数据结构的基础上采用最小二乘法原理，提出了一种计算数采改正值的新方法。经典型实例计算表明，该方法精度较高，效果明显。并对误差的来源作了进一步的分析。  相似文献   

VS型垂直摆倾斜仪的安装调试与标定要点   总被引：1，自引：0，他引：1  

秦家林  佟国刚 《东北地震研究》2002,18(3):20-21

本文总结了铁岭地震台安装，调试与标定VS型垂直倾仪的经验。  相似文献   

附有约束条件的最小二乘影像匹配及其在交通事故中的应用     

刘荣  张祖勋  张剑清 《华东地质学院学报》2003,26(3):287-290

影像匹配技术在图像处理与计算机视觉中有着非常重要的作用。最小二乘影像匹配方法是常用的匹配方法之一。本文简单介绍了目前影像匹配的几种方法及其优缺点，探讨了数字相机的检校原理与方法。重点介绍附有约束条件的最小二乘影像匹配的原理及匹配过程，结合交通事故处理的实例，论证了该方法的可行性。与传统方法相比，在测量精度、自动化程度以及数据三维可视化等方面具有明显优势。  相似文献   

Geomechanical Properties of Shear Zones in the Eastern Aar Massif,Switzerland and their Implication on Tunnelling     

S. Laws  E. Eberhardt  S. Loew  F. Descoeudres 《Rock Mechanics and Rock Engineering》2003,36(4):271-303

Summary ¶Rock zones containing a high fracture density and/or soft, low cohesion materials can be highly problematic when encountered during tunnel excavation. For example in the eastern Aar massif of central Switzerland, experiences during the construction of the Gotthard highway tunnel showed that heavily fractured areas within shear zones were responsible for overbreaks in the form of chimneys several metres in height. To understand and estimate the impact of the shear zones on rock mass behaviour, knowledge concerning the rock mass strength and deformation characteristics is fundamental. A series of laboratory triaxial tests, performed on samples from granite- and gneiss-hosted shear zones revealed that with increasing degree of tectonic overprint, sample strength decreases and rock behaviour shows a transition from brittle to ductile deformation. These trends may be explained by increasing fracture densities, increasing foliation intensity, increasing thickness of fine-grained, low cohesion fracture infill, and increasing mica content associated with the increasing degree of tectonic overprint. As fracture density increases and the influence of discrete, persistent discontinuities on rock mass strength decreases, behaviour of the test samples becomes more and more representative of rock mass behaviour, i.e. that of a densely fractured continuum. For the purpose of numerical modeling calculations, the shear zones may be subdivided with respect to an increasing fracture density, foliation intensity and mica content into a strongly foliated zone, a fractured zone and a cohesionless zone, which in turn exhibit brittle, brittle-ductile and ductile rock mass constitutive behaviour, respectively.Received December 17, 2001; accepted January 9, 2003 Published online April 29, 2003  相似文献