西藏蛇绿岩中硅铁合金组合及成因探讨   总被引：5，自引：2，他引：5       下载免费PDF全文

白文吉杨经绥  陶淑凤施倪承方青松  马喆生颜秉刚熊明  代明泉 《岩石矿物学杂志》2003,22(3):279-284

在雅鲁藏布江蛇绿岩带的东端罗布莎蛇绿岩的铬铁矿中发现不寻常的硅铁合金组合。4种硅铁合金的理论分子式分别为Fe0.84Si2.00(Fe3Si7)、Fe7Si3、Fe6Si4以及Fe4Ti3Si2P。这些合金均选自铬铁矿石的人工重砂中，在少数颗粒中见到由3种硅铁合金组成的交生结构，明显表明这些合金的同生和同成因性。推测它们为化学反应成因,来自于核幔边界地带。  相似文献   

干旱半干旱地区农田土壤NO3-N深层积累及其影响因素   总被引：7，自引：0，他引：7  

郭胜利  张文菊  党廷辉  吴金水  郝明德 《地球科学进展》2003,18(4):584-591

以长期试验资料为基础,着重分析了干旱半干旱地区农田系统中施肥、作物、降水、耕作措施以及土壤类型和特性对产生土壤NO3-N深层积累的影响.分析发现,氮肥的过量施用和400～800 mm降水量偏低是导致干旱半干旱地区土壤NO3-N积累在100～300 cm土层的主要因素.随着氮肥用量的增加,NO3-N深层积累显著增加;氮磷配施有助于降低其积累量.不同作物对氮素的吸收利用效率也是影响NO3-N深层积累的因素,作物之间的轮作方式会有效降低NO3-N深层积累;休闲期种植合理植物可有效降低NO3-N深层积累.NO3-N深层积累主要产生在质地较重的土壤上,带正电荷粘土矿物对NO3-N吸附是导致热带土壤中NO3-N积累的主要因素.深入研究深层积累NO3-N的生物有效性、迁移变化机理、与作物根系之间的关系以及对土壤性状和环境的影响具有重要意义.  相似文献   

Decoupled seismic analysis of an earth dam   总被引：2，自引：0，他引：2  

Ernesto Cascone  Sebastiano Rampello 《Soil Dynamics and Earthquake Engineering》2003,23(5):349-365

The seismic stability of an earth dam is evaluated via the decoupled displacement analysis using the accelerograms obtained by ground response analysis to compute the earthquake-induced displacements. The response analysis of the dam is carried out under both 1D and 2D conditions, incorporating the non-linear soil behaviour through the equivalent linear method. Ten artificial and five real accelerograms were used as input motions and four different depths were assumed for the bedrock.1D and 2D response analyses were in a fair agreement with the exception of the top third of the dam where only a 2D modelling of the problem could ensure that the acceleration field is properly described. The acceleration amplification ratio obtained in the 2D analyses was equal to about 2 in all the cases considered, consistently with data from real case histories.The maximum permanent displacements computed by the sliding block analysis were small, being less than 10% of the service freeboard; a satisfactory performance of the dam can then be envisaged for any of the seismic scenarios considered in the analyses.  相似文献   

Asymmetric one‐storey elastic systems with non‐linear viscous and viscoelastic dampers: Simplified analysis and supplemental damping system design     

Wen‐Hsiung Lin  Anil K. Chopra 《地震工程与结构动力学》2003,32(4):579-596

Investigated is the accuracy in estimating the response of asymmetric one‐storey systems with non‐linear viscoelastic (VE) dampers by analysing the corresponding linear viscous system wherein all non‐linear VE dampers are replaced by their energy‐equivalent linear viscous dampers. The response of the corresponding linear viscous system is determined by response history analysis (RHA) and by response spectrum analysis (RSA) extended for non‐classically damped systems. The flexible and stiff edge deformations and plan rotation of the corresponding linear viscous system determined by the extended RSA procedure is shown to be sufficiently accurate for design applications with errors generally between 10 and 20%. Although similar accuracy is also shown for the ‘pseudo‐velocity’ of non‐linear VE dampers, the peak force of the non‐linear VE damper cannot be estimated directly from the peak damper force of the corresponding linear viscous system. A simple correction for damper force is proposed and shown to be accurate (with errors not exceeding 15%). For practical applications, an iterative linear analysis procedure is developed for determining the amplitude‐ and frequency‐dependent supplemental damping properties of the corresponding linear viscous system and for estimating the response of asymmetric one‐storey systems with non‐linear VE dampers from the earthquake design (or response) spectrum. Finally, a procedure is developed for designing non‐linear supplemental damping systems that satisfy given design criteria for a given design spectrum. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

A unified formulation of the piecewise exact method for inelastic seismic demand analysis including the P‐delta effect     

M. N. Ayd&#x;nolu  Y. M. Fahjan 《地震工程与结构动力学》2003,32(6):871-890

The non‐linear analysis of single‐degree‐of‐freedom (SDOF) systems provides the essential background information for both strength‐based design and displacement‐based evaluation/design methodologies through the development of the inelastic response spectra. The recursive solution procedure called the piecewise exact method, which is efficiently used for the response analysis of linear SDOF systems, is re‐formulated in this paper in a unified format to analyse the non‐linear SDOF systems with multi‐linear hysteresis models. The unified formulation is also capable of handling the P‐delta effect, which generally involves the negative post‐yield stiffness of the hysteresis loops. The attractiveness of the method lies in the fact that it provides the exact solution when the loading time history is composed of piecewise linear segments, a condition that is perfectly satisfied for the earthquake excitation. Based on simple recursive relationships given for positive, negative and zero effective stiffnesses, the unified form of the piecewise exact method proves to be an extremely powerful and probably the best tool for the SDOF inelastic time‐history and response spectrum analysis including the P‐delta effect. A number of examples are presented to demonstrate the implementation of the method. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

A rooftop tuned mass damper frame     

Jerod G. Johnson  Lawrence D. Reaveley  Chris Pantelides 《地震工程与结构动力学》2003,32(6):965-984

This article documents the analytical study and feasibility of placing a tuned mass damper in the form of a limber rooftop moment frame atop relatively stiff structures to reduce seismic acceleration response. Six existing structures were analytically studied using a suite of time history and response spectra records. The analyses indicate that adding mass in conjunction with a limber frame results in an increase in the fundamental period of each structure. The fundamental period increase generally results in a decrease in seismic acceleration response for the same time history and response spectra records. Owing to the limber nature of the rooftop frames, non‐linear analysis methods were required to evaluate the stability of the rooftop tuned mass damper frame. The results indicate the addition of a rooftop tuned mass damper frame reduces the seismic acceleration response for most cases although acceleration response can increase if the rooftop frame is not tuned to accommodate the specific structure's dynamic behaviour and localized soil conditions. Appropriate design of the rooftop tuned mass damper frame can result in decreased seismic acceleration response. This translates to safer structures if used as a retrofit measure or a more economical design if used for new construction. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

System identification of linear structures based on Hilbert–Huang spectral analysis. Part 2: Complex modes     

Jann N. Yang  Ying Lei  Shuwen Pan  Norden Huang 《地震工程与结构动力学》2003,32(10):1533-1554

A method, based on the Hilbert–Huang spectral analysis, has been proposed by the authors to identify linear structures in which normal modes exist (i.e., real eigenvalues and eigenvectors). Frequently, all the eigenvalues and eigenvectors of linear structures are complex. In this paper, the method is extended further to identify general linear structures with complex modes using the free vibration response data polluted by noise. Measured response signals are first decomposed into modal responses using the method of Empirical Mode Decomposition with intermittency criteria. Each modal response contains the contribution of a complex conjugate pair of modes with a unique frequency and a damping ratio. Then, each modal response is decomposed in the frequency–time domain to yield instantaneous phase angle and amplitude using the Hilbert transform. Based on a single measurement of the impulse response time history at one appropriate location, the complex eigenvalues of the linear structure can be identified using a simple analysis procedure. When the response time histories are measured at all locations, the proposed methodology is capable of identifying the complex mode shapes as well as the mass, damping and stiffness matrices of the structure. The effectiveness and accuracy of the method presented are illustrated through numerical simulations. It is demonstrated that dynamic characteristics of linear structures with complex modes can be identified effectively using the proposed method. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings     

Nicolas Luco  Yasuhiro Mori  Yosuke Funahashi  C. Allin Cornell  Masayoshi Nakashima 《地震工程与结构动力学》2003,32(14):2267-2288

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

高浓度黏性泥石流堆积层理结构中筛积层和粗化层形成机理的研究   总被引：5，自引：0，他引：5  

王裕宜  詹钱登  韩文亮  邹仁元 《沉积学报》2003,21(2):205-210

根据高浓度黏性泥石流的观测资料,应用不同类型黏性泥石流的流变特性和流体结构的分类指标-流核比,对高浓度黏性泥石流堆积中的混杂层、筛积层和粗化层理结构进行了成因差异分析。侧重分析了砾石质点在高浓度黏性泥石流蠕动流场中作向上垂直运动的魏森伯效应,并在表面富集形成了筛积层的成因,及其它与粗化层结构的区别。  相似文献   

答“对秦岭奥长环斑花岗岩质疑”   总被引：8，自引：1，他引：8  

卢欣样王晓霞  肖庆辉尉向东 董有 《地质论评》2003,49(2):146-154

环斑花岗岩是一种特殊结构的花岗岩类，并且多数产在元古宙克拉通中。笔者曾报道了在秦岭造山带中发育有印支期具有环斑结构的花岗质岩石。“对秦岭奥长环斑花岗岩质疑”一文认为它们不是环斑花岗岩，并引用Ramo的图表来说明自己的观点。本文将从以下几方面进行讨论：秦岭环斑花岗岩的研究历史；环斑花岗岩的定义；世界上环斑花岗岩的成因类型；秦岭环斑花岗岩的副矿物及铁镁含量和环斑钾长石特征；秦岭环斑花岗岩与基性岩共存等。本文还论证了秦岭环斑花岗岩不同于元古宙非造山环斑花岗岩，而是一种造山型的环斑花岗岩，其形成于后造山环境，是挤压（造山）向拉张（稳定）转折时期的产物。最后对研究秦岭环斑花岗岩的几个理论问题进行了探讨。  相似文献