A Method for Automatically Selecting Aids to Navigation Based on their Spatial Influence Domains     

Lihua Zhang  Sipeng Li  Shuaidong Jia 《Marine Geodesy》2016,39(3-4):256-270

To address the limitations of manually selecting aids to navigation (AtNs) on charts, a method for automatically selecting AtNs based on their spatial influence domains (SIDs) is proposed. First, the associations between the spatial attributes of an AtN are analyzed. Second, an SID of the AtN is defined, and a model of the SID is constructed based on the associations between the spatial attributes. Third, the importance of the location of the AtN is weighted based on the SID model. Fourth, an algorithm to automatically select AtNs based on the maximum coverage of the SIDS of preselected AtNs is developed. Finally, several AtNs are selected automatically using the algorithm. The experimental results demonstrate that (1) the proposed method can automatically select AtNs and the results comply with the requirements; (2) the automatic selection can eliminate the human-induced errors or the inconsistent results of manual selections from different operators; and (3) the efficiency of the proposed method is higher than that of current manual methods.  相似文献   

TRANSIT: a GIS toolbox for estimating the duration of ancient sail-powered navigation     

Gianmarco Alberti 《制图学和地理信息科学》2018,45(6):510-528

Cost-surface analysis in Geographic Information System (GIS) environment has been less frequently used in the study of ancient sail navigation than in other studies of the human past. Navigation cost-surface analysis entails the use of GIS tools that are versatile but not very easy to grasp and to put to work. This article describes an ArcGIS toolbox built to facilitate cost-surface analysis of ancient sail navigation. It estimates the navigation time from a start location, considering parameters relevant for the generation of an accumulated anisotropic cost-surface, automating the complex workflow required to meaningfully pre- and post-process the data. Acknowledging the limitations inherent to the tool, and to the modeling of a complex matter such as sail navigation, the toolbox is first described and then used in a worked example. Historically recorded voyages in the Mediterranean during classical antiquity are compared to estimated durations generated by the toolbox. In spite of structural and expected limitations, the results indicate that the proposed toolbox may produce reasonable estimates. These should be thought of as values gravitating around, not matching, likely past durations. The estimated values may prove useful as an indication of the order of magnitude of past voyages’ duration, and as frame of reference in measuring ancient maritime space through time.  相似文献   

华北区域分米级北斗地基增强服务系统构建及精度分析     

李志才  张鹏  陈明  王孝青 《地理信息世界》2019,(3):60-64

利用国家级北斗连续运行基准站和省级区域北斗CORS站,基于国家卫星导航定位服务平台,通过改造和直接利用的方式,在华北平原构建了我国首个跨区域北斗分米级地基增强服务系统。经采用双频终端实地测试,该系统覆盖京津冀晋全部区域及内蒙古部分区域,采用GPS+北斗双模定位静态精度达到分米级,动态定位精度达到亚米级,单北斗模式定位精度略低,但仍在分米-亚米量级,极大地提高了我国北斗导航系统的高精度应用能力,拓宽了我国北斗民用导航的应用范围和领域,可满足高精度北斗实时导航、定位服务的应用需求。  相似文献   

基于GNSS方位辅助惯性导航系统的水下地形精密测量技术          下载免费PDF全文

冯义楷  丁继胜  杨龙  陈义兰  梁冠辉 《海洋技术学报》2019,38(5)

多波束测深技术是目前水下地形测量的主要技术手段,测量平台的瞬时姿态及方位是影响多波束测深系统最终成果准确度的重要因素。GNSS方位辅助惯性导航系统,作为目前应用较为广泛的方位、姿态、及位置综合测量系统,不仅能够提供高精度位置信息,同时也能提供测量平台的瞬时姿态及方位数据,而且因为具有GNSS方位辅助测量,使得最终方位测量结果比传统方位测量精度大大提高,这对于多波束最终测量成果精度提高具有重要意义。文中从GNSS方位辅助惯性导航系统原理及技术优势出发,结合Trimble RTX后处理技术,从姿态测量、方位测量及辅助高程测量方面分析了在多波束水下地形测量中的应用,并以实际测量成果来展现其在水下地形精密测量技术方面的优势,结果显示,定位精度可以达到优于2 cm级别,方位精度可以优于0.01°(依赖于双GNSS天线之间的基线长度),该技术对水下地形测量准确度提升作用显著。  相似文献   

一种顾及道路复杂度的增量路网构建方法     

刘纪平  张用川  徐胜华  钱新林  仇阿根  张福浩 《测绘学报》2019,48(4):480-488

针对传统路网采集和更新需要昂贵的实地测量以及大量的后续内业处理问题,提出了一种从大规模粗糙轨迹数据中自动生成路网的方法。该方法包含轨迹滤选和路网增量构建两步:第1步通过构建空间、时间、逻辑约束的规则模型,在消除数据中的噪音和冗余的同时,将原始轨迹进行合理分割,滤选形成规范轨迹集合;第2步基于信息熵计算轨迹点周围道路的复杂度,据此自动调节道路分割参数,不断将新产生的路段加入到路网,同时计算道路平均交通流量和速度等路况信息,遍历各规范轨迹的定位点重复以上处理过程,最终得到完整路网。通过昆明市200辆出租车采集的约6851万条轨迹数据进行路网构建试验,并与OpenStreetMap数据比较,证明了本文方法的有效性。与已有典型方法比较,本文方法能用更少节点提取更高质量的路网。  相似文献   

融合三边测量和PDR的室内定位关键技术分析及应用     

陈鹏  廖明  刘武平  呙维  宋杨 《测绘通报》2019,(2):17-21

随着无线室内定位技术的发展,室内定位效果有了明显提升,但仅采用无线定位方法,定位点跳动频繁,定位效果较差,难以获取连续位置的准确定位。实际应用中不同的硬件平台也会影响具体定位方法的选择,通常需采用多种技术手段的组合以达到理想定位效果。本文基于微信公众平台的服务需要,提出了一种基于三边测量定位和步行者航位推算（PDR）融合的室内定位方法,通过地图信息匹配纠正定位结果,得到连续稳定的定位结果;并集成室内地图可视化技术,研发了一套基于微信平台的三维室内定位系统,在实际工程场景中进行应用,具有较好的定位效果。  相似文献   

基于多模CORS的网络RTK服务性能测试     

杜仲进 《地理空间信息》2019,17(4):32-34,47,I0002

从北斗地基增强系统建设出发,分析多模CORS实验网,提供多模网络RTK服务,增强北斗卫星导航系统的应用。根据实时测量精度、定位服务的时效性、时间可用性、空间可用性和实用性测试,评价实验网提供的网络RTK服务性能。测试结果表明通过加入北斗导航卫星系统信号,定位精度略为提高,可有效改善电离层模型,提高流动站固定的效率,可以解决困难环境的作业问题,提高作业效率。  相似文献   

应用数字航道航标信息提高航标测绘效率     

袁鹏 《地理空间信息》2019,17(4):69-70,I0003

通过研究"数字航道"动态监测平台中航标的各项信息与航标测绘数据的关联性,实现航标数据共享,优化现阶段航道维护性中航标测绘的工作方式和流程,从而实现利用数字航道航标信息提升航道测绘工作效率和质量,降低航道维护测量成本。  相似文献   

广西北斗地基增强系统性能测试与精度分析     

陈香萍  杨翼飞  李小行 《地理空间信息》2019,(7):65-67,I0002

在完成广西北斗地基增强系统建设的基础上,测试了系统网络RTK实时定位测量的内符合精度、环境可用性、空间可用性、时间可用性与兼容性;并对GPS+BDS+GLONASS、BDS、GPS+GLONASS三种模式下网络RTK的定位结果进行了对比分析。结果表明,广西北斗地基增强系统的各项精度指标满足设计要求,基于GPS+BDS+GLONASS多系统的网络RTK测量具有较高的精度与较好的稳定性和可靠性。  相似文献   

Status of Satellite Orbit Determination and Time Synchronization Technology for Global Navigation Satellite Systems     

ZHOU Shan-shi  HU Xiao-gong  LIU Li  HE Feng  TANG Cheng-pan  PANG Jun-yang 《Chinese Astronomy and Astrophysics》2019,43(4):479-492

In the form of satellite ephemerides and clock parameters, the space datum and system time information of one global navigation satellite system (GNSS) is transferred to users. With the continuous updating in the satellite payload such as the high-precision atomic clock, the monitoring and tracking technique such as the inter-satellite link, and in the data processing technique, the accuracy and real-time performance of the satellite ephemeris and clock error products are steadily improved. Starting from December 27th, 2018, the BeiDou Navigation System 3, or BDS-3, has provided the accurate and reliable basic positioning, navigation, and timing (PNT) service for the users in the countries within the “one belt and one road”. This paper has summarized the faced challenges of the precise orbit determination and time synchronization from the regional BDS-2 system to the BDS-3 global system, and the specific solutions at the control segment. In addition, this paper has compared the BDS with other GNSS systems in terms of technical characteristics. Finally, aiming at a higher accuracy and more reliable PNT service, the road map of precise orbit determination and time synchronization technique for the next generation navigation systems is discussed, which will provide a reference for developing the global navigation satellite systems with an even higher accuracy.  相似文献