On size and boundary effects in scaled model blasts spatial problems     

H. P. Rossmanith  K. Uenishi 《Fragblast: International Journal for Blasting and Fragmentation》2005,9(3):139-174

This paper addresses size and boundary effects on wave propagation, fracture pattern development and fragmentation in small scale laboratory-size specimens for model blasting. Small block type specimens are centre-line loaded by linear explosive charges and supersonically detonated. Using elastic wave propagation theory and fracture mechanics it is shown that the type of boundary conditions which prevail at the outer boundary of the cylinder control the extension of bore-hole cracking and fragmentation within the body of the cylinder. In the case of a composite block where a cylindrical core of different material is embedded, the level of fracturing and fragmentation is controlled by the separation of the interface which in turn depends on the relative dimensions of the core and the block. The most important parameter is the ratio between the length of the pulse (space-wise or time-wise) and the characteristic dimensions of the models, i.e. in this case the dimensions of the core and the mantel. Stress wave superposition effects occur in the corner sections of the mantel. Theoretical results are in good agreement with recent experimental findings.  相似文献   

Prediction of creep characteristic of rock under varying environment   总被引：2，自引：0，他引：2  

T. N. Singh  A. K. Verma 《Environmental Geology》2005,48(4-5):559-568

The strain developed due to creep is mainly proportional to the logarithm of the time under load, and is mostly proportional to the stress and temperature. At higher temperature the creep rate falls slowly with respect to time, and the creep strain is proportional to a fractional power of time, with the exponent increasing as the temperature increases and reaching a value approximately one-third at temperatures of about 0.5°C. At these temperatures, the creep increases with stress according to a power greater than unity and possibly exponentially. It increases with temperature as (−U/kT), where U is an activation energy and k is Boltzman’s constant. There are different methods to determine the creep strain and the energy of Jog (B) including experimental methods, multivariate regression analysis, and by numerical simulation. These methods are less cumbersome and time consuming. In the present investigation, artificial neural network technique has been used for prediction of the creep strain and energy of Jog (B). Two different networks have been tested and validated. Both the networks have four input neurons and one hidden layer with five neurons, and one output neuron. The data for different rocks at temperatures up to 750°C under conditions of compressive or tortional stress are taken from the literatures. The training and testing data sets used were 163 and 14, respectively. To deal with the problem of overfitting of data, Bayesian regulation has been used and network is trained with suitable training epochs. The coefficients of correlation among the predicted and observed values are found high and they improve the confidence of the users. The mean absolute percentage error obtained are also very low.  相似文献   

The role of socio-environmental networking in the sustainability of rain-fed agriculture in the coastal savanna of Ghana     

Michael O’Neal Campbell 《GeoJournal》2005,61(1):79-88

  相似文献   

Metrics to assess how longitudinal channel network connectivity and in‐stream Atlantic salmon habitats are impacted by hydropower regulation          下载免费PDF全文

Willem B. Buddendorf  Iain A. Malcolm  Josie Geris  Mark E. Wilkinson  Chris Soulsby 《水文研究》2017,31(12):2132-2142

Habitat fragmentation in channel networks and riverine ecosystems is increasing globally due to the construction of barriers and river regulation. The resulting divergence from the natural state poses a threat to ecosystem integrity. Consequently, a trade‐off is required between the conservation of biodiversity in channel networks and socio‐economic factors including power generation, potable water supplies, fisheries, and tourism. Many of Scotland's rivers are regulated for hydropower generation but also support populations of Atlantic salmon (Salmo salar L.) that have high economic and conservation value. This paper investigates the use of connectivity metrics and weightings to assess the impact of river barriers (impoundments) associated with hydropower regulation on natural longitudinal channel connectivity for Atlantic salmon. We applied 2 different weighting approaches in the connectivity models that accounted for spatial variability in habitat quality for spawning and fry production and contrasted these models with a more traditional approach using wetted area. Assessments of habitat loss using the habitat quality weighted models contrasted with those using the less biologically relevant wetted area. This highlights the importance of including relevant ecological and hydrogeomorphic information in assessing regulation impacts on natural channel connectivity. Specifically, we highlight scenarios where losing a smaller area of productive habitat can have a larger impact on Atlantic salmon than losing a greater area of less suitable habitat. It is recommended that future channel connectivity assessments should attempt to include biologically relevant weightings, rather than relying on simpler metrics like wetted area which can produce misleading assessments of barrier impacts.  相似文献   

Assessment of flow paths and confluences for saltwater intrusion in a deltaic river network          下载免费PDF全文

Baoshan Cui  Xiaojing Shao  Zhiming Zhang 《水文研究》2015,29(20):4549-4558

Saltwater intrusion is a serious issue in estuarine deltas all over the world due to rapid urban sprawl and water shortage. Therefore, detecting the major flow paths or locations at risk of saltwater intrusion in estuarine ecosystems is important for mitigating saltwater intrusion. In this paper, we introduce a centrality index, the betweenness centrality (BC), to address this problem. Using the BC as the weighted attribute of the river network, we identify the critical confluences for saltwater intrusion and detect the preferential flow paths for saltwater intrusion through the least‐cost‐path algorithm from a graph theory approach. Moreover, we analyse the responses of the BC values of confluences calculated in the river network to salinity. Our results show that the major flow paths and critical confluences for saltwater intrusion in a deltaic river network can be represented by the least cost paths and the BC values of confluences, respectively. In addition, a significant positive correlation between the BC values of confluences and salinity is determined in the Pearl River Delta. Changes in the salinity can produce significant variation in the BC values of confluences. Therefore, freshwater can be diverted into these major flow paths and critical confluences to improve river network management under saltwater intrusion. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Watershed structural influences on the distributions of stream network water and solute travel times under baseflow conditions          下载免费PDF全文

Anna Bergstrom  Brian McGlynn  John Mallard  Tim Covino 《水文研究》2016,30(15):2671-2685

Watershed structure influences the timing, magnitude, and spatial location of water and solute entry to stream networks. In turn, stream reach transport velocities and stream network geometry (travel distances) further influence the timing of export from watersheds. Here, we examine how watershed and stream network organization can affect travel times of water from delivery to the stream network to arrival at the watershed outlet. We analysed watershed structure and network geometry and quantified the relationship between stream discharge and solute velocity across six study watersheds (11.4 to 62.8 km²) located in the Sawtooth Mountains of central Idaho, USA. Based on these analyses, we developed stream network travel time functions for each watershed. We found that watershed structure, stream network geometry, and the variable magnitude of inputs across the network can have a pronounced affect on water travel distances and velocities within a stream network. Accordingly, a sample taken at the watershed outlet is composed of water and solutes sourced from across the watershed that experienced a range of travel times in the stream network. We suggest that understanding and quantifying stream network travel time distributions are valuable for deconvolving signals observed at watershed outlets into their spatial and temporal sources, and separating terrestrial and in‐channel hydrological, biogeochemical, and ecological influences on in‐stream observations. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Efficient estimation of flood forecast prediction intervals via single‐ and multi‐objective versions of the LUBE method          下载免费PDF全文

Lei Ye  Jianzhong Zhou  Hoshin V. Gupta  Hairong Zhang  Xiaofan Zeng  Lu Chen 《水文研究》2016,30(15):2703-2716

Prediction intervals (PIs) are commonly used to quantify the accuracy and precision of a forecast. However, traditional ways to construct PIs typically require strong assumptions about data distribution and involve a large computational burden. Here, we improve upon the recent proposed Lower Upper Bound Estimation method and extend it to a multi‐objective framework. The proposed methods are demonstrated using a real‐world flood forecasting case study for the upper Yangtze River Watershed. Results indicate that the proposed methods are able to efficiently construct appropriate PIs, while outperforming other methods including the widely used Generalized Likelihood Uncertainty Estimation approach. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Hydrological impact of a reservoir network in the upper Gan River Basin,China     

Ningpeng Dong  Zhongbo Yu  Chuanguo Yang  Mingxiang Yang  Wenzhuo Wang 《水文研究》2019,33(12):1709-1723

  相似文献   

Large‐scale poroelastic fractured reservoirs modeling using the fast multipole displacement discontinuity method          下载免费PDF全文

A. Verde  A. Ghassemi 《国际地质力学数值与分析法杂志》2016,40(6):865-886

An effective approach to modeling the geomechanical behavior of the network and its permeability variation is to use a poroelastic displacement discontinuity method (DDM). However, the approach becomes rather computationally intensive for an extensive system of cracks, particularly when considering coupled diffusion/deformation processes. This is because of additional unknowns and the need for time‐marching schemes for the numerical integration. The Fast Multipole Method (FMM) is a technique that can accelerate the solution of large fracture problems with linear complexity with the number of unknowns both in memory and CPU time. Previous works combining DDM and FMM for large‐scale problems have accounted only for elastic rocks, neglecting the fluid leak‐off from the fractures into the matrix and its influence on pore pressure and stress field. In this work we develop an efficient geomechanical model for large‐scale natural fracture networks in poroelastic reservoirs with fracture flow in response to injection and production operations. Accuracy and computational performance of the proposed method with those of conventional poroelastic DDM are compared through several case studies involving up to several tens of thousands of boundary elements. The results show the effectiveness of the FMM approach to successfully evaluate field‐scale problems for the design of exploitation strategies in unconventional geothermal and petroleum reservoirs. An example considering faults reveals the impact of reservoir compartmentalization because of sealing faults for both geomechanical and flow variables under elastic and poroelastic rocks. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Watershed delineation using hydrographic features and a DEM in plain river network region          下载免费PDF全文

Zhengqing Lai  Shuo Li  Guonian Lv  Zhirong Pan  Guosong Fei 《水文研究》2016,30(2):276-288

Watershed delineation is a required step when conducting any spatially distributed hydrological modelling. Automated approaches are often proposed to delineate a watershed based on a river network extracted from the digital elevation model (DEM) using the deterministic eight‐neighbour (D8) method. However, a realistic river network cannot be derived from conventional DEM processing methods for a large flat area with a complex network of rivers, lakes, reservoirs, and polders, referred to as a plain river network region (PRNR). In this study, a new approach, which uses both hydrographic features and DEM, has been developed to address the problems of watershed delineation in PRNR. It extracts the river nodes and determines the flow directions of the river network based on a vector‐based hydrographic feature data model. The river network, lakes, reservoirs, and polders are then used to modify the flow directions of grid cells determined by D8 approach. The watershed is eventually delineated into four types of catchments including lakes, reservoirs, polders, and overland catchments based on the flow direction matrix and the location of river nodes. Multiple flow directions of grid cells are represented using a multi‐direction encoding method, and multiple outflows of catchments are also reflected in the topology of catchments. The proposed approach is applied to the western Taihu watershed in China. Comparisons between the results obtained from the D8 approach, the ‘stream burning’ approach, and those from the proposed approach clearly demonstrate an improvement of the new approach over the conventional approaches. This approach will benefit the development of distributed hydrological models in PRNR for the consideration of different types and multiple inlets and outlets of catchments. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献