Application of the SHETRAN basin‐scale,landslide sediment yield model to the Llobregat basin,Spanish Pyrenees     

James C. Bathurst  Aidan Burton  Barry G. Clarke  Francesc Gallart 《水文研究》2006,20(14):3119-3138

The first application of the SHETRAN basin‐scale, landslide erosion and sediment yield model is carried out for a major landsliding event in the upper 505 km² of the Llobregat basin, in the eastern Spanish Pyrenees, in November 1982. The model simulates the spatial distribution of shallow landslides and their sediment yield. Acknowledging uncertainty in the model parameter evaluation, the aim of the application was not to reproduce the observed occurrence of landslides as accurately as possible with one simulation, but to bracket the observed pattern with several simulations representing uncertainty in the key input conditions. Bounds on the landslide simulations were thus determined as a function of uncertainty in the vegetation root cohesion (used in the model factor of safety calculations). The resulting upper bound considerably overestimates the observed pattern (17 000 landslides compared with an observation of around 700), but it reproduces several of the principal clusters in the observed pattern. The lower bound contains around 500 landslides. The sediment yield estimates (2670–14 630 t km^?2) are comparable to measurements elsewhere in the Pyrenees for extreme events. The results demonstrate an ability to simulate the basin‐scale landslide response to a rainfall event and the resulting sediment yield. They also highlight the need for further research in setting the uncertainty bounds and in avoiding large overestimates of landslide occurrence arising in part from a current inability to model small‐scale controls for a basin of the given size. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Assessing the Measurement Consistency Between the Jason-2/AMR and SARAL/AltiKa/DFMR Microwave Radiometers Using Simultaneous Nadir Observations     

Bin Zhang  Changyong Cao  John Lillibridge  Laury Miller 《Marine Geodesy》2015,38(3):143-155

SARAL/AltiKa has a Dual Frequency Microwave Radiometer (DFMR), and Jason-2 has an Advanced Microwave Radiometer (AMR). Both microwave radiometer sensors include a 23.8 GHz primary water sensing channel. The measurement consistencies between DFMR and AMR are important for establishing a consistent altimetry data set between SARAL/AltiKa and Jason-2 in order to accurately assess sea level rise in a long-term time series. This study investigates the measurement consistency in the 23.8 GHz channel between DFMR and AMR at the Simultaneous Nadir Overpasses (SNO's) between the two satellites and also at coldest ocean brightness temperature locations. Preliminary results show that while both instruments show no significant trends over the one year since the launch of SARAL, a consistent relative bias of 2.88 K (DFMR higher than AMR) with a standard deviation of 0.98 K is observed. The relative bias at the lowest brightness temperature from the SNO method (-3.82 K) is consistent with that calculated from coldest ocean method (-3.74 K). The relative bias exhibits strong latitude (and scene temperature) dependency, changing from -3.82 K at high latitudes to -0.92 K near the equator. There also exists an asymmetry between the northern and southern hemisphere. The relative bias increases toward the lower end of brightness temperature.  相似文献   

The 2013 Ibiza Calibration Campaign of Jason-2 and SARAL Altimeters     

F. Frappart  N. Roussel  R. Biancale  J.J. Martinez Benjamin  F. Mercier  F. Perosanz 《Marine Geodesy》2015,38(3):219-232

This study presents the results of the 2013 Ibiza (Western Mediterranean) calibration campaign of Jason-2 and SARAL altimeters. It took place from 14 to 16 September 2013 and comprised two phases: the calibration of the GNSS (Global Navigation Satellite System) buoys to estimate the antenna height of each of them and the absolute calibration to estimate the altimeter bias (i.e., the difference of sea level measured by radar altimetry and GNSS). The first one was achieved in the Ibiza harbor at a close vicinity of the Ibiza tide gauge and the second one was performed at ～ 40 km at the northwest of Ibiza Island at a crossover point of Jason-2 and SARAL nominal groundtracks. Five buoys were used to delineate the crossover region and their measurements interpolated at the exact location of each overflight. The overflights occurred two consecutive days: 15 and 16 September 2013 for Jason-2 and SARAL, respectively. The GNSS data were processed using precise point positioning technique. The biases found are of (?0.1 ± 0.9) and (?3.1 ± 1.5) cm for Jason-2 and SARAL, respectively.  相似文献   

顾及几何特征和拓扑连续性的道路网匹配方法     

秦育罗  宋伟东  张在岩  孙小荣 《测绘通报》2021,(8):55-60

已有的道路网匹配方法需要一定的人为干预和控制,仍无法实现匹配自动化,而且对于具有一定尺度差异的数据而言,受不相关道路对象的影响,匹配结果中会存在较多的误匹配。为此,本文提出一种顾及几何特征和拓扑连续性的由粗匹配到精匹配的分层匹配策略。粗匹配阶段,利用短边中位数Hausdorff距离计算匹配对象的相似度,再以道路网弧段端点的近邻分析结果作为匹配阈值,判断匹配对象是否为同名实体;精匹配阶段,将粗匹配阶段评价结果中离散的同名实体构建为完整的道路Stroke,即以追踪的方式剔除误匹配和添加漏匹配。利用宿城区不同尺度的道路网对所提算法进行验证,结果表明,该算法具有较好的匹配效果,能够实现匹配自动化。  相似文献   

基于计算机视觉的相机标定方法     

景国峰 《北京测绘》2021,35(1):122-125

随着航空摄影测量及倾斜摄影技术的不断推广,其相机传感器受内在及外在因素的影响,使得相机畸变参数的准确性并不是稳定如一,因而极大限制了数据处理的效率。针对这一问题,本文以解决相机畸变参数的准确性作为出发点,从相机成像原理出发,分析相机成像中的误差,介绍相机标定的方法,对相机标定进行实验分析,以达到准确标定相机参数的目的,并将计算的畸变参数应用于实际项目的空中三角测量。试验结果表明,获取的畸变参数可提高空三的效率及稳定性。  相似文献   

便携式消费级无人机相机标定有效性评估   总被引：1，自引：0，他引：1  

李冀  熊晶  熊保颂  吴星宇  张朝阳  李雪 《测绘通报》2021,(4):131-135

本文针对近年来在各行业中广泛使用的便携式消费级无人机开展了相机标定有效性研究,分别通过室内标定场和后处理软件对相机进行标定和自标定,在对比无相机标定、飞前相机标定、飞后相机标定和自标定迭代校正等方法所得成图精度后,对不同相机标定方案的有效性进行了评估。结果表明：各种方案成图总体精度差别不大;飞前、飞后相机标定与无相机标定的成图精度相当;自标定迭代校正的成图精度略高于其他方案。可见采用航拍照片自标定参数迭代校正的方法更适合于飞行控制精度和成像系统稳定性都不高的便携式消费级无人机相机标定。  相似文献   

分离式靶标摄影测量在LAMOST中的应用     

李明  王钢 《天文研究与技术》2011,(3)

为了获取LAMOST焦面板上光纤的零位位置,提出了一种基于分离式标准靶标的高精度摄影测量方法。首先,根据Tsai摄像机标定参数模型介绍了CCD相机的标定原理。然后介绍了用光重心算法求取靶标发光点像面坐标及通过球面三角公式计算靶标发光点物面坐标。接着,利用最小二乘法导出了含标定参数的方程组。最后,介绍了标准靶标的放置方法以及提高光纤位置测量精度的靶标取法。实验结果表明:CCD相机的标定残差平均值为8.8μm;标定残差的标准差为5.3μm。测量方法简单易行,通过仔细分析,找出了残差偏大的原因,对后续进一步测量实验有重要指导意义。  相似文献   

液闪法测量水中氚放射性活度的淬灭效应   总被引：3，自引：2，他引：1  

张向阳  刘福亮  张琳  郭华良 《岩矿测试》2010,29(4):469-471

采用液体闪烁计数法进行放射性同位素测量时存在淬灭效应,而且几乎每个样品的淬灭程度都不同,并影响测量精度。采用液体闪烁计数法测量水中氚的放射性活度,淬灭是难以避免的,因此要进行淬灭校正,才能使不同淬灭程度的样品的测量结果具有可比性。淬灭校正的方法有很多,外标准校正法是一种比较可靠的方法。文章采用氚外标准校正法进行实验,得出淬灭校正曲线即探测效率E与淬灭参数SQP(E)的关系式为E=0.001 3SQP(E)-0.707 6,经过样品验证,该曲线是可靠的。采用外标准校正法适合于大批样品的测量。  相似文献   

北京一号小卫星图像镶嵌处理技术研究     

高仉生  赵英俊 《铀矿地质》2010,26(1):60-64

介绍北京一号小卫星数据的特点及应用情况,分析了卫星图像镶嵌处理技术流程,对其中的技术难点,如去条带处理、几何校正、图像拼接及色彩平衡等进行了重点探讨并提出解决办法。利用北京一号小卫星数据将两幅多光谱影像进行了镶嵌处理,得到了一幅覆盖整个研究区的新影像,镶嵌影像色彩丰富、层次感好、信息量大。  相似文献   

单一松软煤层瓦斯抽采工艺数值模拟     

林萌 《中国煤炭地质》2010,(11):18-21,41

借鉴油气藏数值模拟理论、技术和方法,对单一松软煤层的瓦斯抽采工艺进行了研究分析。根据单一松软煤层特点,提出了单一松软煤层的几何模型技术——单直径球型孔隙模型,在此基础上建立了煤层瓦斯抽采的地质和数理模型,并根据网格差分方法推导出数值解。以实际生产数据对新模型及其数值解进行验证,结果表明该模型可以用于指导单一松软煤层瓦斯抽采工艺的确定。  相似文献