Continental subduction and exhumation of UHP rocks. Structural and geochronological insights from the Dabieshan (East China)   总被引：34，自引：0，他引：34  

Michel Faure  Wei Lin  Urs Schrer  Liangshu Shu  Yan Sun  Nicolas Arnaud 《Lithos》2003,70(3-4):213-241

In the Dabieshan, the available models for exhumation of ultrahigh-pressure (UHP) rocks are poorly constrained by structural data. A comprehensive structural and kinematic map and a general cross-section of the Dabieshan including its foreland fold belt and the Northern Dabieshan Domain (Foziling and Luzenguang groups) are presented here. South Dabieshan consists from bottom to top of stacked allochtons: (1) an amphibolite facies gneissic unit, devoid of UHP rocks, interpreted here as the relative autochton; (2) an UHP allochton; (3) a HP rock unit (Susong group) mostly retrogressed into greenschist facies micaschists; (4) a weakly metamorphosed Proterozoic slate and sandstone unit; and (5) an unmetamorphosed Cambrian to Early Triassic sedimentary sequence unconformably covered by Jurassic sandstone. All these units exhibit a polyphase ductile deformation characterized by (i) a NW–SE lineation with a top-to-the-NW shearing, and (ii) a southward refolding of early ductile fabrics.

The Central Dabieshan is a 100-km scale migmatitic dome. Newly discovered eclogite xenoliths in a Cretaceous granitoid dated at 102 Ma by the U–Pb method on titanite demonstrate that migmatization post-dates HP–UHP metamorphism. Ductile faults formed in the subsolidus state coeval to migmatization allow us to characterize the structural pattern of doming. Along the dome margins, migmatite is gneissified under post-solidus conditions and mylonitic–ultramylonitic fabrics commonly develop. The north and west boundaries of the Central Dabieshan metamorphics, i.e. the Xiaotian–Mozitan and Macheng faults, are ductile normal faults formed before Late Jurassic–Early Cretaceous. A Cretaceous reworking is recorded by synkinematic plutons.

North of the Xiaotian–Mozitan fault, the North Dabieshan Domain consists of metasediments and orthogneiss (Foziling and Luzenguang groups) metamorphosed under greenschist to amphibolite facies which never experienced UHP metamorphism. A rare N–S-trending lineation with top-to-the-south shearing is dated at 260 Ma by the ⁴⁰Ar/³⁹Ar method on muscovite. This early structure related to compressional tectonics is reworked by top-to-the-north extensional shear bands.

The main deformation of the Dabieshan consists of a NW–SE-stretching lineation which wraps around the migmatitic dome but exhibits a consistently top-to-the-NW sense of shear. The Central Dabieshan is interpreted as an extensional migmatitic dome bounded by an arched, top-to-the-NW, detachment fault. This structure may account for a part of the UHP rock exhumation. However, the abundance of amphibolite restites in the Central Dabieshan migmatites and the scarcity of eclogites (found only in a few places) argue for an early stage of exhumation and retrogression of UHP rocks before migmatization. This event is coeval to the N–S extensional structures described in the North Dabieshan Domain. Recent radiometric dates suggest that early exhumation and subsequent migmatization occurred in Triassic–Liassic times. The main foliation is deformed by north-verging recumbent folds coeval to the south-verging folds of the South Dabieshan Domain. An intense Cretaceous magmatism accounts for thermal resetting of most of the ⁴⁰Ar/³⁹Ar dates.

A lithosphere-scale exhumation model, involving continental subduction, synconvergence extension with inversion of southward thrusts into NW-ward normal faults and crustal melting is presented.  相似文献   

Compression mechanisms of coesite     

R. J. Angel  C. S. J. Shaw  G. V. Gibbs 《Physics and Chemistry of Minerals》2003,30(3):167-176

 The structure of coesite has been determined at ten pressures up to a maximum of 8.68 GPa by single-crystal X-ray diffraction. The dominant mechanism of compression is the reduction of four of the five independent Si–O–Si angles within the structure. There is no evidence of the fifth linkage, Si1–O1–Si1, deviating from 180°. Some Si–O bond distances also decrease by up to 1.6% over the pressure range studied. The pattern of Si–O–Si angle reduction amounts to a rotation of the Si2 tetrahedron around the [001] direction. This rotation induces significant internal deformation of the Si1 tetrahedron. Comparison of the experimental data with rigid-unit distance least-squares simulations of coesite suggests that this pattern of compression, the anomalous positive values of both s₂₃ and K′′ in the equation of state of coesite, its high elastic anisotropy and the unusual straight Si1–O1–Si1 linkage within the structure are all consequences of the connectivity of the tetrahedral framework. Received: 11 July 2002 / Accepted: 14 January 2003 Acknowledgements The help of Christian Baerlocher of ETH Zurich in providing both the DLS-76 software and advice in its use is gratefully acknowledged, as are discussions with Paul Ribbe of Virginia Tech and the comments of two anonymous reviewers. The data analysis was supported by the National Science Foundation under grant EAR-0105864 to N.L. Ross and R.J. Angel.  相似文献   

Atomistic simulation of the structure and elastic properties of pyrite (FeS2) as a function of pressure     

Sithole  H.M.  Ngoepe  P.E.  Wright  K. 《Physics and Chemistry of Minerals》2003,30(10):615-619

Interatomic potential parameters have been derived at simulated temperatures of 0 K and 300 K to model pyrite FeS₂. The predicted pyrite structures are within 1% of those determined experimentally, while the calculated bulk modulus is within 7%. The model is also able to simulate the properties of marcasite, even though no data for this phase were included in the fitting procedure. There is almost no difference in results obtained for pyrite using the two potential sets; however, when used to model FeS₂ marcasite, the potential fitted at 0 K performs better. The potentials have also been used to study the high-pressure behaviour of pyrite up to 44 GPa. The calculated equation of state gives good agreement with experiment and shows that the Fe–S bonds shorten more rapidly that the S–S dimer bonds. The behaviour of marcasite at high pressure is found to be similar to that of pyrite.  相似文献   

江西2003年夏季罕见高温气候特征及成因分析   总被引：2，自引：2，他引：2  

尹洁  张传江  张超美  文绮新 《气象与减灾研究》2003,26(4):19-22

对江西省2003年夏季罕见高温干旱的强度、气候历史地位、500hPa环流形势特征和海温特征等进行了分析。结果表明,2003年夏季高温强度在多项指标上均排建国以来第一位;在500hPa环流形势上具有特殊的分布特征;在前期环流形势场和海温场上具有一些前兆特征,有较好的预报意义。  相似文献   

中国夏季降水异常空间模与副热带高压的关系   总被引：13，自引：6，他引：13       下载免费PDF全文

王晓春  吴国雄 《大气科学》1997,21(2):161-169

本文用1959～1994年6、7、8月全国范围47个5°×5°经纬度网格降水资料分析了夏季降水异常空间模的月际差异，并在此基础上用西太平洋副高指数及青藏高原指数#FKB#FS分析降水异常空间模与环流的关系，为检验环流指数与降水相关场的整体信度，还对8月份降水资料进行了Monte-Carlo检验。结果表明，夏季总降水异常的空间模在每一月份中并非表现得同样清楚，江淮流域与河套及华南的反相关在8月份表现得最清楚。而青藏高原中东部南北两侧的负相关在6月及8月很清楚，7月份次之。8月份西太平洋副高北界异常对江淮流域与河套及华南地区降水异常反相关的产生有很大作用。副高稳定偏北时，河套、华南易涝，江淮易旱。反之亦然。青藏高原指数#FKB#FS与逐月降水的相关分析表明，青藏高原上高压及低涡活动对高原中东部南北两侧负相关的产生有一定作用。当高压活动偏多时，北侧易旱、南侧易涝。并且6月及8月的作用较大，7月较小。另外，8月份副高活动对这一降水异常空间模的产生也有一定影响。  相似文献   

大陆地震的动力学模型研究   总被引：7，自引：2，他引：7  

李丽  石耀霖 《地震》1997,17(2):133-141

应用非线性动力学模型，以大陆构造构体为参照对象，对大陆地震的成组孕育和发生过程进行模拟研究，通过对６×８弹簧－滑块－阻尼器组合单元非线性动力学模型的理论计算及其结果的分析，得到了一系列与实际地震较类似的人工地震图像，如模型中的地震活动在时间上有轮回怀，在地点上有条带性，并在不同轮回中有条过移的现象。模型中应力变化十分复杂，但仍能为预测地震提供概略性的信息。  相似文献   

试论陆壳增生的两种基本模式及其对比   总被引：2，自引：0，他引：2  

竺国强  程晓敢 《高校地质学报》1997,3(4):411-418

大陆地壳是地球形成演化的必然产物。大陆地壳由不同时代、不同类型、不同规模地体的拼贴而增生；同时已形成的大陆地壳沿着新的断裂分裂、离散而碱小。因此大陆地壳是地体拼贴增生与分裂离散的综合结果。太古代早期，原始陆壳形成后，主要通过环太平洋型与天山型两种基本模式达到陆壳的增生。环太平洋型陆壳增生模式出现于陆块的边缘，由古大陆向大洋方向单向增生，增生年代由老到新，增生地体一般都有较大距离的移置，其增生与板块的俯冲作用密切有关。天山型陆壳增生模式出现在陆块的内部，其形成与陆块的开台作用密切有关，可以但不一定伴随有俯冲作用。当古大陆沿一定方向断裂带分裂、离散。其间形成新的海槽接受碳酸盐岩和正常陆源碎屑沉积物与来自地壳深部或地幔的火山物质。由于壳下应力条件改变，两侧古陆相向运动，海槽中物质受两侧古陆碰撞挤压，形成褶皱造山带，并把两侧的古大陆“焊接”成新的、范围更大的大陆地壳。  相似文献   

西藏聂拉木高喜马拉雅结晶岩系的伸展变形     

何政伟  王根厚 《世界地质》1997,16(2):1-6

西藏聂拉木高喜马拉雅结晶岩系在区域上以单一的叶理和单一的拉伸线理占主要地位，其变形带的组构主要反映了透入性的伸展变形；根据显微构造分析表明早期由北往南推覆，晚期由南向北伸展，且晚期表现非常明显。  相似文献   

太古宙克拉通型下地壳剖面：华北怀安－丰镇－尚义的麻粒岩－角闪岩系   总被引：8，自引：4，他引：8  

翟明国  郭敬辉  阎月华  李永刚  李江海  张雯华 《岩石学报》1996,12(2)

华北克拉通北缘晋冀内蒙交界地区有变质程度连续变化、从高压基性麻粒岩、麻粒岩到角闪岩相的变质岩系出露。它们的古变质压力由＞１．４ＧＰａ（５０ｋｍ）变化到０．５ＧＰａ（１５ｋｍ）；岩石类型从变辉长岩、中酸性正片麻岩到表壳岩变化；变质矿物组合由不含水的耐火组合变为富含云母和角闪石的组合；地球化学性质表现出从贫Ｓｉ和Ａｌ、轻度亏损生热元素到具有正常的化学成分的连续变化；包裹体流体性质在轻度亏损生热元素的麻粒岩中均为ＣＯ２流体，而在麻粒岩相的表壳岩和角闪岩系中Ｈ２Ｏ流体逐渐增加。上述变质岩系剖面的组成和特点符合大陆下地壳的定义，可能代表了包括最下部地壳在内的华北地块太古宙克拉通型大陆下地壳。据此本文建立了我国第一条克拉通型大陆下地壳剖面，并讨论其地质意义以及相关的问题  相似文献   

华北中北部高级变质岩区的构造区划及其晚太古代构造演化   总被引：12，自引：4，他引：12  

李江海  翟明国 《岩石学报》1996,12(2):179-192

通过区域构造编图及重点地段的详细研究，在华北克拉通中北部识别出一条ＮＮＥ向的构造带——龙泉关－桑干带，它以大规模的韧性剪切带网络、重熔钾质花岗岩带、数量众多的高压麻粒岩构造透镜体或岩片为特征。剪切带以低角度逆冲为主，矿物拉伸线理指示运动方向为ＮＷ－ＳＥ向。这些剪切带造成东西两侧基底杂岩与表壳岩系包括孔兹岩系的广泛构造叠置，以及高压麻粒岩的近等温减压上隆。从更大的范围看，龙泉关－桑干带处于鄂尔多斯克拉通和阜平－赞皇克拉通之间，并且被五台－吕梁裂谷型绿岩带截切或不整合覆盖。该带应形成于晚太古代，记录了上述两个克拉通斜向拼合的构造过程  相似文献