A Combined Three-Dimensional Geological-Geostatistical-Numerical Model of Underground Excavations in Rock   总被引：1，自引：1，他引：1  

M. Stavropoulou  G. Exadaktylos  G. Saratsis 《Rock Mechanics and Rock Engineering》2007,40(3):213-243

Summary. This paper exploits geological and borehole geotechnical data obtained in the exploratory phase of a tunneling project to investigate in a first place if the kriging interpolation scheme may effectively reproduce the spatial variability of rock mass quality (Rock Mass Rating, RMR) in the vicinity of tunnels. For this purpose a quick solver in Fortran has been developed that performs variography analysis of 3D spatial data, fast kriging estimations of RMR between borehole sampling locations at the centroids of the elements of the numerical model, and model validation. For the purpose of an integrated underground excavation design, a step further is made by incorporating into the 3D mechanical numerical model of the rock mass, the three-dimensional (3D) solid geological model, thus coupling the geology with the ground (geotechnical) model (i.e. each element of the numerical model is assigned a geological material). The mechanical properties of each finite difference cell (or Representative Elementary Volume) of the ground model were then prescribed according to its geological type, the spatial heterogeneity of the rock mass expressed quantitatively with the kriging model, and the upscaling calculations of the mechanical properties of the intact rocks determined in the laboratory, based on the size-effect (strength dependence on size) and Damage Theory. Furthermore, a preliminary numerical simulation of the advance of unsupported tunnels in the model of the heterogeneous rock mass was performed for illustration purposes.  相似文献   

Controlled Fracture Growth by Blasting While Protecting Damages to Remaining Rock     

S. S. Rathore  S. Bhandari 《Rock Mechanics and Rock Engineering》2007,40(3):317-326

Summary. Conventional blasting causes cracks and fractures in the rock. Controlled blasting techniques produce the macrocrack in a desired direction and eliminate microcrack in the remaining rock. Macrocrack development in desired direction is required for extraction of dimensional stone and at the same time there is need to reduce microcrack development in the block and remaining rock. To achieve the objectives, experimental work in the quarries was carried out for separating marble block from the in situ strata as practiced in some of the Indian mines by using detonating cord of 30 to 50 g/m by varying hole spacing, hole diameter, air cushioning, water and sand filled blast-holes. Blasthole notching was carried out. Further, tests were carried out by using various liners inside the blasthole to determine the damages in the extracted block and remaining rock. The designed experimental work was undertaken and rock samples were collected by coring before and after blasting for quantification of microcrack in the rock. P-wave velocity and microscopic studies were conducted for quantification of damages. Experiments were also conducted at laboratory scale for the quantification of damages in single circular and notched holes with variation of stemming and liners. The P-wave velocity close to hole always reduces after blast and in case of NG-based charge and detonating cord it decreases up to 1/3^rd. With PVC pipe and paper tube liners decrease is negligible. Thus, by using notched hole with paper tube, decrease in P-wave is minimum indicating least damage.  相似文献   

Performance Prediction of Circular Diamond Saws from Mechanical Rock Properties in Cutting Carbonate Rocks   总被引：2，自引：0，他引：2  

M. Fener  S. Kahraman  M. O. Ozder 《Rock Mechanics and Rock Engineering》2007,40(5):505-517

  相似文献   

Digital Image Based Approach for Three-Dimensional Mechanical Analysis of Heterogeneous Rocks   总被引：2，自引：0，他引：2  

S. Chen  Z. Q. Yue  L. G. Tham 《Rock Mechanics and Rock Engineering》2007,40(2):145-168

Summary This paper presents a digital image based approach for three-dimensional (3-D) numerical simulation and failure analysis of rocks by taking into account the actual 3-D heterogeneity. Digital image techniques are adopted to extract two-dimensional (2-D) material heterogeneity from material surface images. The 2-D image mesostructures are further extrapolated to 3-D cuboid mesostructures by assuming the material surface as a representation of the inner material heterogeneity within a very small depth. The iterative milling and scanning system is set up to generate the 3-D rock mesostructures. A Hong Kong granite specimen is used as an example to demonstrate the procedure of 3-D mesostructure establishment. The mechanical responses and failure process under the conventional Brazilian tensile test condition are examined through numerical analyses. The stress distribution, crack propagation process and failure model of heterogeneous material cases are simulated with a finite difference software. The numerical results indicate that material heterogeneity plays an important role in determining the failure behavior of rocks under external loading.  相似文献   

SEDIMENT BUDGETS AND RATES OF SEDIMENT TRANSFER ACROSS COLD ENVIRONMENTS IN EUROPE: A COMMENTARY     

JEFF WARBURTON 《Geografiska Annaler: Series A, Physical Geography》2007,89(1):95-101

The sediment mass balance equation is the fundamental concept which underpins most sediment budget studies in cold climate environments. In these environments the interchange between water and ice plays a predominant geomorphological role. Such environments show a large variety of geomorphic processes which are conditioned by both contemporary environmental conditions but also the legacy of past events. In the northern Europe/Arctic fringe these cold regions are distributed in a fragmented fashion and are likely to be very sensitive to climate change scenarios. The significance of such changes for sediment transfer can only be established if we have good contemporary process understanding, the necessary tools to carefully monitor and model such changes, and can apply such methods at appropriate scales which integrate both sediment sources and sinks.  相似文献   

The 1.5–5-day eastward waves in the upper stratosphere–mesosphere as observed by the Esrange meteor radar and the SABER instrument     

E.G. Merzlyakov  D.V. Pancheva 《Journal of Atmospheric and Solar》2007,69(17-18):2102

Data of neutral meridional wind obtained by the meteor radar at Esrange and data of temperature and pressure measured by the Sounding of the Atmosphere using Broadband Emission Radiometry (SABER) instrument on board the Thermosphere–Ionosphere–Mesosphere Energetics and Dynamics (TIMED) spacecraft were studied with respect to a day-to-day atmospheric variability with periods ranging from 1.5 to 5 days. The detailed analysis was carried out for February 2004. Perturbations of the atmospheric parameters at the examined periods appeared mainly as eastward-propagating waves of zonal wavenumbers 1 and 2. We suggested that these waves excited by the jet instability on both flanks of the polar-night jet in the upper stratosphere and mesosphere interact nonlinearly with each other, and this interaction generates secondary waves. The radar observed both primary and secondary waves at mesospheric heights. The data analysis supports this suggestion. Under conditions of weaker instability observed in February 2003 the perturbations of atmospheric parameters of periods ranging from 1.5 to 5 days had smaller amplitudes at heights of the mesosphere than those in February 2004. It was found that the Eliassen-Palm fluxes calculated for the waves generated by the jet instability were mainly downward directed. This result suggests a possible dynamical influence of the mesospheric layers on the lower atmospheric levels.  相似文献   

A formula for computing the gravity disturbance from the second radial derivative of the disturbing potential   总被引：6，自引：0，他引：6  

J. Li 《Journal of Geodesy》2002,76(4):226-231

 A formula for computing the gravity disturbance and gravity anomaly from the second radial derivative of the disturbing potential is derived in detail using the basic differential equation with spherical approximation in physical geodesy and the modified Poisson integral formula. The derived integral in the space domain, expressed by a spherical geometric quantity, is then converted to a convolution form in the local planar rectangular coordinate system tangent to the geoid at the computing point, and the corresponding spectral formulae of 1-D FFT and 2-D FFT are presented for numerical computation. Received: 27 December 2000 / Accepted: 3 September 2001  相似文献   

Two different methods of geoidal height determinations using a spherical harmonic representation of the geopotential, topographic corrections and the height anomaly–geoidal height difference     

H. Nahavandchi 《Journal of Geodesy》2002,76(6-7):345-352

 It is suggested that a spherical harmonic representation of the geoidal heights using global Earth gravity models (EGM) might be accurate enough for many applications, although we know that some short-wavelength signals are missing in a potential coefficient model. A `direct' method of geoidal height determination from a global Earth gravity model coefficient alone and an `indirect' approach of geoidal height determination through height anomaly computed from a global gravity model are investigated. In both methods, suitable correction terms are applied. The results of computations in two test areas show that the direct and indirect approaches of geoid height determination yield good agreement with the classical gravimetric geoidal heights which are determined from Stokes' formula. Surprisingly, the results of the indirect method of geoidal height determination yield better agreement with the global positioning system (GPS)-levelling derived geoid heights, which are used to demonstrate such improvements, than the results of gravimetric geoid heights at to the same GPS stations. It has been demonstrated that the application of correction terms in both methods improves the agreement of geoidal heights at GPS-levelling stations. It is also found that the correction terms in the direct method of geoidal height determination are mostly similar to the correction terms used for the indirect determination of geoidal heights from height anomalies. Received: 26 July 2001 / Accepted: 21 February 2002  相似文献   

Determining the size of spatial clusters in focused tests: Comparing two methods by means of simulation in a GIS     

Yifei Sun 《Journal of Geographical Systems》2002,4(4):359-370

 Based on a four-point evaluation system consisting of accuracy, consistency, power, and chance to commit type I errors, this study compares Tango's minimum p (MinP) and Stone's maximum relative risk (MaxRR) methods for detecting focused cluster size through simulations in GIS. It reveals that the MinP method is more effective than the MaxRR method. The MinP method exhibits higher levels of accuracy and consistency; and its power and chance to commit type I errors are similar to the MinP method. The MaxRR method has a tendency to underestimate the cluster size, while the MinP method tends to overestimate the cluster size, particularly when the clusters are relatively big and have high relative risk levels. In addition, the MinP method seems to be most effective in revealing the size of clusters when clusters are neither too strong nor too weak. The lowest detection rates for clustering occur when the clustering signal is relatively weak, which is easily understandable. In practice, it might be useful to use both the methods to estimate a range of possible cluster sizes, where the MaxRR method indicates the lower estimate, while the MinP method gives the higher estimate of the cluster size. Received: 24 August 2002 / Accepted: 20 December 2002  相似文献   

Stochastic assessment of GPS carrier phase measurements for precise static relative positioning   总被引：17，自引：11，他引：17  

J. Wang  C. Satirapod  C. Rizos 《Journal of Geodesy》2002,76(2):95-104

 Global positioning system (GPS) carrier phase measurements are used in all precise static relative positioning applications. The GPS carrier phase measurements are generally processed using the least-squares method, for which both functional and stochastic models need to be carefully defined. Whilst the functional model for precise GPS positioning is well documented in the literature, realistic stochastic modelling for the GPS carrier phase measurements is still both a controversial topic and a difficult task to accomplish in practice. The common practice of assuming that the raw GPS measurements are statistically independent in space and time, and have the same accuracy, is certainly not realistic. Any mis-specification in the stochastic model will inevitably lead to unreliable positioning results. A stochastic assessment procedure has been developed to take into account the heteroscedastic, space- and time-correlated error structure of the GPS measurements. Test results indicate that the reliability of the estimated positioning results is improved by applying the developed stochastic assessment procedure. In addition, the quality of ambiguity resolution can be more realistically evaluated. Received: 13 February 2001 / Accepted: 3 September 2001  相似文献