Seafloor spreading, obduction and triple junction tectonics of the Mineoka Ophiolite, Central Japan     

Yujiro Ogawa  Akiko Takahashi 《Tectonophysics》2004,392(1-4):131

The Tertiary Mineoka ophiolite occurs in a fault zone at the intersection of the Honshu and Izu forearcs in central Japan and displays structural evidence for three major phases of deformation: normal and oblique-slip faults and hydrothermal veins formed during the seafloor spreading evolution of the ophiolite at a ridge-transform fault intersection. These structures may represent repeated changes in differential stress and pore-fluid pressures during their formation. The second series of deformation is characterized by oblique thrust faults with Riedel shears and no significant mineral veining, and is interpreted to have resulted from transpressional dextral faulting during the obduction of the ophiolite through oblique convergence and tectonic accretion. This deformation occurred at the NW corner of a TTT-type (trench–trench–trench) triple junction in the NW Pacific rim before the middle Miocene. The third series of deformation of the ophiolite is marked by contractional and oblique shear zones, Riedel shears, and thrust faults that crosscut and offset earlier structures, and that give the Mineoka fault zone its lenticular (phacoidal) fabric at all scales. This deformation phase was associated with the establishment and the southward migration of the TTT Boso triple junction and with the kinematics of oblique subduction and forearc sliver fault development. The composite Mineoka ophiolite hence displays rocks and structures that evolved during its complex geodynamic history involving seafloor spreading, tectonic accretion, and triple junction evolution in the NW Pacific Rim.  相似文献   

供电局设备保修Call Center系统的设计与实现   总被引：7，自引：0，他引：7  

黄晓杰  喻占武  张晋东 《武汉大学学报(信息科学版)》2004,29(3):278-281

介绍了客户呼叫中心(call center)的基本原理．分析了供电局设备保修的具体需求．提出了一个电力设备保修联动系统的解决方案。实践表明，该系统很好地解决了设备保修和用户投诉问题。  相似文献   

基于时空分析的贫困丘陵山区耕地变化机理研究   总被引：6，自引：0，他引：6  

何国松  祝国瑞 《武汉大学学报(信息科学版)》2004,29(6):508-512

在地理信息系统技术的支持下 ,利用耕地面积变化时间序列模型、耕地动态度模型、耕地重心变化模型等 ,对湖北省咸宁市耕地的时间变化和空间变化特征进行了定量的研究 ,并应用主成分分析法 ,选择 2 3个因素对其驱动因子进行了相关分析。结果表明 ,耕地变化主要受经济因子、人口、房地产政策及耕地开发强度的影响  相似文献   

Contemporary kinematics of the southern Aegean and the Mediterranean Ridge   总被引：4，自引：0，他引：4  

Corné Kreemer  Nicolas Chamot-Rooke 《Geophysical Journal International》2004,157(3):1377-1392

  相似文献   

A parameterisation for the threshold shear velocity to initiate deflation of dry and wet sediment   总被引：1，自引：0，他引：1  

Wim M. Cornelis  Donald Gabriels  Roger Hartmann 《Geomorphology》2004,59(1-4):43

A new parameterisation for the threshold shear velocity to initiate deflation of dry and wet particles is presented. It is based on the balance of moments acting on particles at the instant of particle motion. The model hence includes a term for the aerodynamic forces, including the drag force, the lift force and the aerodynamic-moment force, and a term for the interparticle forces. The effect of gravitation is incorporated in both terms. Rather than using an implicit function for the effect of the aerodynamic forces as reported earlier in literature, a constant aerodynamic coefficient was introduced. From consideration of the van der Waals force between two particles, it was further shown that the effect of the interparticle cohesion force between two dry particles on the deflation threshold should be inversely proportional to the particle diameter squared. The interparticle force was further extended to include wet bonding forces. The latter were considered as the sum of capillary forces and adhesive forces. A model that expresses the capillary force as a function of particle diameter squared and the inverse of capillary potential was deduced from consideration of the well-known model of Fisher and the Young–Laplace equation. The adhesive force was assumed to be equal to tensile strength, and a function which is proportional to particle diameter squared and the inverse of the potential due to adhesive forces was derived. By combining the capillary-force model and the adhesive force model, the interparticle force due to wet bonding was simplified and written as a function of particle diameter squared and the inverse of matric potential. The latter was loglinearly related to the gravimetric moisture content, a relationship that is valid in the low-moisture content range that is important in the light of deflation of sediment by wind. By introducing a correction to force the relationship to converge to zero moisture content at oven dryness, the matric potential–moisture content relationship contained only one unknown model parameter, viz. moisture content at −1.5 MPa. Working out the model led to a rather simple parameterisation containing only three coefficients. Two parameters were incorporated in the term that applies to dry sediment and were determined by using experimental data as reported by Iversen and White [Sedimentology 29 (1982) 111]. The third parameter for the wet-sediment part of the model was determined from wind-tunnel experiments on prewetted sand and sandy loam aggregates. The model was validated using data from wind-tunnel experiments on the same but dry sediment, and on data obtained from simulations with the model of Chepil [Soil Sci. Soc. Am. Proc. 20 (1956) 288]. The experiments showed that soil aggregates should be treated as individual particles with a density equal to their bulk density. Furthermore, it was shown that the surface had to dry to a moisture content of about 75% of the moisture content at −1.5 MPa before deflation became sustained. The threshold shear velocities simulated with our model were found to be in good agreement with own observations and with simulations using Chepil's model.  相似文献   

Crustal and upper mantle seismic structure of the Australian Plate, South Island, New Zealand   总被引：7，自引：0，他引：7  

Anne Melhuish  W. Steven Holbrook  Fred Davey  David A. Okaya  Tim Stern   《Tectonophysics》2005,395(1-2):113-135

Seismic reflection and refraction data were collected west of New Zealand's South Island parallel to the Pacific–Australian Plate boundary. The obliquely convergent plate boundary is marked at the surface by the Alpine Fault, which juxtaposes continental crust of each plate. The data are used to study the crustal and uppermost mantle structure and provide a link between other seismic transects which cross the plate boundary. Arrival times of wide-angle reflected and refracted events from 13 recording stations are used to construct a 380-km long crustal velocity model. The model shows that, beneath a 2–4-km thick sedimentary veneer, the crust consists of two layers. The upper layer velocities increase from 5.4–5.9 km/s at the top of the layer to 6.3 km/s at the base of the layer. The base of the layer is mainly about 20 km deep but deepens to 25 km at its southern end. The lower layer velocities range from 6.3 to 7.1 km/s, and are commonly around 6.5 km/s at the top of the layer and 6.7 km/s at the base. Beneath the lower layer, the model has velocities of 8.2–8.5 km/s, typical of mantle material. The Mohorovicic discontinuity (Moho) therefore lies at the base of the second layer. It is at a depth of around 30 km but shallows over the south–central third of the profile to about 26 km, possibly associated with a southwest dipping detachment fault. The high, variable sub-Moho velocities of 8.2 km/s to 8.5 km/s are inferred to result from strong upper mantle anisotropy. Multichannel seismic reflection data cover about 220 km of the southern part of the modelled section. Beneath the well-layered Oligocene to recent sedimentary section, the crustal section is broadly divided into two zones, which correspond to the two layers of the velocity model. The upper layer (down to about 7–9 s two-way travel time) has few reflections. The lower layer (down to about 11 s two-way time) contains many strong, subparallel reflections. The base of this reflective zone is the Moho. Bi-vergent dipping reflective zones within this lower crustal layer are interpreted as interwedging structures common in areas of crustal shortening. These structures and the strong northeast dipping reflections beneath the Moho towards the north end of the (MCS) line are interpreted to be caused by Paleozoic north-dipping subduction and terrane collision at the margin of Gondwana. Deeper mantle reflections with variable dip are observed on the wide-angle gathers. Travel-time modelling of these events by ray-tracing through the established velocity model indicates depths of 50–110 km for these events. They show little coherence in dip and may be caused side-swipe from the adjacent crustal root under the Southern Alps or from the upper mantle density anomalies inferred from teleseismic data under the crustal root.  相似文献   

Morphological and microtectonic analysis of Quaternary deformation from Puná and Santa Clara Islands, Gulf of Guayaquil, Ecuador (South America)     

J.F. Dumont  E. Santana  W. Vilema  K. Pedoja  M. Ordez  M. Cruz  N. Jimnez  I. Zambrano 《Tectonophysics》2005,399(1-4):331

This paper presents the neotectonic study of Santa Clara and Puná Islands sited in the Gulf of Guayaquil eastern part. Both islands are located on the south-western segment of the fault zone bounding to the east the North Andean Block. Fault motion and morphostructural analysis were carried out from Pleistocene age terrain. A two step deformation characterises the South Puná tectonics. The first step involves the Zambapala Cordillera uplift that post-dates Pleistocene sediments and pre-dates a marine terrace correlated with the M.I.S. 11 or 13 (440–550 ka). The second step is the formation of a pull-apart that shows evidence of 2.9 km dextral offset since the M.I.S. 11 or 13, giving an offset mean rate of 5.3 to 6.6 mm/yr. This rate is higher than the one calculated on the Pallatanga Fault northeast of the study area, in the Western Andean Cordillera, suggesting that deformation is split in different fault segments from the Gulf of Guayaquil to the continent. The Zambapala Cordillera uplift and transpression deformation requires a compressive event that may have been induced by the subduction process during the early Pleistocene.  相似文献   

Role of the Kazerun fault system in active deformation of the Zagros fold-and-thrust belt (Iran)     

Christine Authemayou  Olivier Bellier  Dominique Chardon  Zaman Malekzade  Mohammad Abassi 《Comptes Rendus Geoscience》2005,337(5):539-545

Field structural and SPOT image analyses document the kinematic framework enhancing transfer of strike-slip partitioned motion from along the backstop to the interior of the Zagros fold-and-thrust belt in a context of plate convergence slight obliquity. Transfer occurs by slip on the north-trending right-lateral Kazerun Fault System (KFS) that connects to the Main Recent Fault, a major northwest-trending dextral fault partitioning oblique convergence at the rear of the belt. The KFS formed by three fault zones ended by bent orogen-parallel thrusts allows slip from along the Main Recent Fault to become distributed by transfer to longitudinal thrusts and folds. To cite this article: C. Authemayou et al., C. R. Geoscience 337 (2005).  相似文献   

系统偏差常数弧段估计策略对多系统静态精密单点定位的影响     

洪菊  涂锐  王星星  刘崇锦  刘金海  黄小东  卢晓春 《大地测量与地球动力学》2019,39(9):947-951

为探讨系统偏差最优估计策略，利用IGS提供的GPS、BDS、GLONASS和Galileo 四系统的观测数据以及GFZ提供的精密卫星钟差和精密轨道产品，将系统偏差（ISB）按照高斯白噪声、20 min、30 min、1 h、2 h分段常数进行单天静态解，分别获得E、N、U方向上的坐标偏差，分析不同系统偏差求解策略下多系统融合PPP的收敛时间和定位精度。结果表明，在多系统融合静态PPP中，从观测模型强度与定位结果稳定性和可靠性角度综合考虑，对ISB采用20 min分段常数估计策略是最优的，静态PPP收敛时间在30 min左右，收敛后的定位精度E方向优于2 cm、N方向优于1 cm、U方向优于5 cm。  相似文献   

智慧城市时空信息云平台建设研究     

程晓燕  朱元彪  邬懿宁 《测绘与空间地理信息》2016,(7)

以完善的云环境建设为支撑,以构建标准安全的防护体系为保障,以时空信息云平台建设为基础,以智慧应用建设为重点,促成跨域、跨部门、跨层级的数据融合,提高城市综合智能化水平,使城市运转更加高效、敏捷、低碳与和谐。  相似文献