内蒙古中西部地区震源参数和场地响应反演   总被引：15，自引：0，他引：15       下载免费PDF全文

高立新  郑斯华  丁风和 《地震工程学报》2005,27(2):109-114

采用Atkinson方法，基于遗传算法，利用呼和浩特数字地震台网7个子台记录的9次质量较高的地震事件资料，计算了内蒙古中西部地区的品质因子Q值和非弹性衰减系数c（f）。在所研究的频率范围内，前者和频率．厂有很好的线形关系：Q（f）=116．8f^1.000后者与频率．厂的变化关系不明显。在此基础上采用Moya方法反演了7个地震台的场地响应和地震的震源参数，并对它们之间的相互关系进行了讨论。结果显示在所研究的频率域内7个基岩台站的场地均不同程度的存在放大作用，其次震源参数间具有较好的线性关系。本文还详细介绍了Atkinson方法和Moya方法的原理和计算步骤。  相似文献   

Probabilistic approach for active control of structures: experimental verification     

Jae‐Seung Hwang  Kyung‐Won Min  Sang‐Hyun Lee  Hongjin Kim 《地震工程与结构动力学》2005,34(3):207-225

In our previous study (Earthquake Engineering and Structural Dynamics 2003; 32 :2301), we have developed a probabilistic algorithm for active control of structures. In the probabilistic control algorithm, the control force is determined by the probability that the structural energy exceeds a specified target critical energy, and the direction of a control force is determined by the Lyapunov controller design method. In this paper, an experimental verification of the proposed probabilistic control algorithm is presented. A three‐story test structure equipped with an active mass driver (AMD) has been used. The effectiveness of the control algorithm has been examined by exciting the test structure using a sinusoidal signal, a scaled El Centro earthquake and a broadband Gaussian white noise; and, especially, experiments on control have been performed under different conditions to that of system identification in order to prove the stability and robustness of the proposed control algorithm. The experimental results indicate that the probabilistic control algorithm can achieve a significant response reduction under various types of ground excitations even when the modeling error exists. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

鄂尔多斯盆地南部的黄土塬区地震资料处理与解释,第一部分:地震资料处理     

Jiang Jiayu Fu Shouxian Li Jiuling 《应用地球物理》2005,2(4):241-246

Branching river channels and the coexistence of valleys, ridges, hiils, and slopes＇as the result of long-term weathering and erosion form the unique loess topography. The Changqing Geophysical Company, working in these complex conditions, has established a suite of technologies for high-fidelity processing and fine interpretation of seismic data. This article introduces the processes involved in the data processing and interpretation and illustrates the results.  相似文献   

对我国金刚石钻头胎体经典配方的理论优化和建议          下载免费PDF全文

侯传彬  郭铁峰  张祖培  任锡钢 《探矿工程》2005,32(8):58-59

选取合理可信的约束条件对我国经典的63号金刚石钻头胎体配方进行了优化验证，获得理论认识，并依此对已有成熟配方的改进提出了建议。  相似文献   

An adaptive finite element model for wellbore breakout simulation     

Diogo L. Cecílio  Philippe R. B. Devloo  Sônia M. Gomes  Erick S.R. Santos 《国际地质力学数值与分析法杂志》2019,43(4):814-828

A finite element formulation is proposed and implemented for analysing the stability of excavated wells using the DiMaggio-Sandler constitutive elastoplastic model with a typical carbonate reservoir configuration. The quality of the finite element approximation is ensured by applying smooth curved elements adapted to the wellbore geometry, and h − p adaptive finite element meshes in the plastic zone. General purpose procedures are defined to transfer the elastoplastic deformation history to newly created integration points. A breakout damage criterion is proposed based on the second invariant of the deviatoric plastic deformation tensor. This damage criterion is used to apply a mesh movement algorithm to represent material collapse. The automatic successive application of the breakout damage criterion results in elliptical realistically looking geometries obtained in experiments reported in the literature.  相似文献   

Material selection for the gas containment system of a compressed natural gas carrier fleet     

《Applied Ocean Research》2016

In this work, the possible exploitation of fiber-reinforced composites in the context of maritime transportation of compressed natural gas (CNG) is investigated. In addition to a more conventional steel configuration, two different fiber materials, carbon and glass, are considered as construction materials for pressure vessels (PVs) to be stored on board ships, with thickness optimized by FEM analysis.The considered scenario is represented by the transportation of CNG from an offshore well to a terminal on shore. Fleets of ships carrying CNG in pressure vessels manufactured with the investigated materials are generated by means of a ship synthesis model (SSM) software and compared on the basis of technical and economical indicators.The choice of the construction material influences considerably the weight of the PVs, which represent a major item of total ship weight and reflects directly on the general transport performances in terms of resistance, seakeeping and reliability in the service. On the other hand, capital as well as operating expenditures are considerably affected by the choice. When exploring the design space, the ship synthesis model is able, at a preliminary stage of the design, to account for the various technical and economical aspects, their implications and relationships. Results are presented of computations carried out in a specific case, identified by the annual gas production and other characteristics of the well terminal and a cruising route for the ships. The comparison is carried out on the basis of the cost per transported unit of gas and of the percentage of success in the transportation process. The computations show that the choice of the PV material has a key influence on the results in terms of optimal number, dimensions and speed of the ships.  相似文献   

Water level observations from unmanned aerial vehicles for improving estimates of surface water–groundwater interaction          下载免费PDF全文

Filippo Bandini  Michael Butts  Torsten Vammen Jacobsen  Peter Bauer‐Gottwein 《水文研究》2017,31(24):4371-4383

Integrated hydrological models are usually calibrated against observations of river discharge and piezometric head in groundwater aquifers. Calibration of such models against spatially distributed observations of river water level can potentially improve their reliability and predictive skill. However, traditional river gauging stations are normally spaced too far apart to capture spatial patterns in the water surface, whereas spaceborne observations have limited spatial and temporal resolution. Unmanned aerial vehicles can retrieve river water level measurements, providing (a) high spatial resolution; (b) spatially continuous profiles along or across the water body, and (c) flexible timing of sampling. A semisynthetic study was conducted to analyse the value of the new unmanned aerial vehicle‐borne datatype for improving hydrological models, in particular estimates of groundwater–surface water (GW–SW) interaction. Mølleåen River (Denmark) and its catchment were simulated using an integrated hydrological model (MIKE 11–MIKE SHE). Calibration against distributed surface water levels using the Differential Evolution Adaptive Metropolis algorithm demonstrated a significant improvement in estimating spatial patterns and time series of GW–SW interaction. After water level calibration, the sharpness of the estimates of GW–SW time series improves by ~50% and root mean square error decreases by ~75% compared with those of a model calibrated against discharge only.  相似文献   

Retaining wall optimization using interior search algorithm with different bound constraint handling          下载免费PDF全文

A.H. Gandomi  A.R. Kashani  F. Zeighami 《国际地质力学数值与分析法杂志》2017,41(11):1304-1331

Along with the applicability of optimization algorithms, there are lots of features that can affect the functioning of the optimization techniques. The main purpose of this paper is investigating the significance of boundary constraint handling (BCH) schemes on the performance of optimization algorithms. To this end, numbers of deterministic and probabilistic BCH approaches are applied to one of the most recent proposed optimization techniques, named interior search algorithm (ISA). Apart from the implementing different BCH methods, a sensitivity analysis is conducted to find an appropriate setting for the only parameter of ISA. Concrete cantilever retaining wall design as one of the most important geotechnical problems is tackled to declare proficiency of the ISA algorithm, on the one hand, and benchmark the effect of BCH schemes on the final results, on the contrary. As results demonstrate, various BCH approaches have a perceptible impact on the algorithm performance. In like manner, the essential parameter of ISA can also play a pivotal role in this algorithm's efficiency. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Slope stability analysis using evolutionary optimization techniques          下载免费PDF全文

A.H. Gandomi  A.R. Kashani  M. Mousavi  M. Jalalvandi 《国际地质力学数值与分析法杂志》2017,41(2):251-264

Slope stability optimization, in the presence of a band of a weak layer between two strong layers, is accounted for in complicated geotechnical problems. Classical optimization algorithms are not suitable for solving such problems as they need a proper preliminary solution to converge to a valid result. Therefore, it is necessary to find a proper algorithm which is capable of finding the best global solution. Recently a lot of metaheuristic algorithms have been proposed which are able to evade local minima effectively. In this study four evolutionary algorithms, including well‐known and recent ones, such as genetic algorithm, differential evolution, evolutionary strategy and biogeography‐based optimization (BBO), are applied in slope stability analysis and their efficiencies are explored by three benchmark case studies. Result show BBO is the most efficient among these evolutionary algorithms and other proposed algorithms applied to this problem. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Site characterization model using least‐square support vector machine and relevance vector machine based on corrected SPT data (Nc)     

Pijush Samui  T. G. Sitharam 《国际地质力学数值与分析法杂志》2010,34(7):755-770

Statistical learning algorithms provide a viable framework for geotechnical engineering modeling. This paper describes two statistical learning algorithms applied for site characterization modeling based on standard penetration test (SPT) data. More than 2700 field SPT values (N) have been collected from 766 boreholes spread over an area of 220 sqkm area in Bangalore. To get N corrected value (N_c), N values have been corrected (N_c) for different parameters such as overburden stress, size of borehole, type of sampler, length of connecting rod, etc. In three‐dimensional site characterization model, the function N_c=N_c (X, Y, Z), where X, Y and Z are the coordinates of a point corresponding to N_c value, is to be approximated in which N_c value at any half‐space point in Bangalore can be determined. The first algorithm uses least‐square support vector machine (LSSVM), which is related to a ridge regression type of support vector machine. The second algorithm uses relevance vector machine (RVM), which combines the strengths of kernel‐based methods and Bayesian theory to establish the relationships between a set of input vectors and a desired output. The paper also presents the comparative study between the developed LSSVM and RVM model for site characterization. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献