共查询到20条相似文献，搜索用时 15 毫秒
1.
The propagation of hydraulic fracture in elastic rocks has widely been investigated. In the paper, we shall focus on numerical modeling of hydraulic fracturing in a class of porous rocks exhibiting plastic deformation. The plastic strain of porous rocks is described by a non-associated plastic model based on Drucker–Prager criterion. The plastic deformation is coupled with fluid pressure evolution described by the lubrication theory. An extended finite element method is used for modeling the propagation of fracture. The fracture propagation criterion is based on the J-integral. The proposed numerical model is validated by comparisons with numerical and analytical results. The influence of plastic deformation on fracture propagation process is investigated.
相似文献2.
考虑岩石材料的应变软化及扩容效应,采用岩石材料的弹性-塑性软化-塑性残余三线性应力-应变软化模型和莫尔-库仑屈服准则,推导了非轴对称荷载下圆形隧洞围岩弹性区、塑性软化区和塑性残余区的应力场、应变场、位移场和塑性区半径的近似解析解,适用于围岩塑性区较大且侧压力系数1≤λ<3的情况。该近似解析方法与有限元法的计算结果较为接近,可代替有限元方法进行简单的圆形隧洞围岩弹塑性分析。 相似文献
3.
将确定双重孔隙-裂隙介质凝聚力及内摩擦角的方法与描述介质强度各向异性的微结构-无迹张量方法相结合,引入到三维有限元程序中。以简单的算例,通过解析解与数值解的比较,验证了所开发的有限元程序的可靠性。针对一个假定的位于被3组正交裂隙所切割的围岩中的矩形洞室,使用Mohr-Coulomb准则进行弹塑性数值模拟,就不同的工况分析了围岩中的位移、应力及塑性区的状态。计算结果显示：裂隙组的不同展布及组合使得岩体的变形及强度性质有着不同的各向异性,从而相应地导致围岩中的位移、应力及塑性区的分布与量值产生明显的差异。 相似文献
4.
深入研究盐岩受力变形、破坏机制及力学模型,对于保证油气地下储库的安全和稳定具有十分重要的意义。以盐岩在多组围压下的三轴试验为基础,由热力学定律出发,将损伤引入到改进的摩尔-库仑(Mohr-Coulomb)准则中,提出了与围压相关的损伤准则和塑性硬化函数,建立了一种能够描述盐岩力学特性的弹塑性损伤模型,该模型能够反映盐岩的塑性与损伤耦合、应变硬化-软化和围压影响。将研究成果与ABAQUS软件相结合,通过二次开发,编制了相应的计算程序。通过模拟盐岩室内三轴压缩试验表明,数值模拟曲线与试验曲线吻合较好,所建立的力学模型可以较好地描述盐岩在不同围压状态下的力学损伤发展、应变硬化-软化以及脆-塑性转换的力学特征。 相似文献
5.
采用有限元强度折减法分析边坡稳定性时,计算所得安全系数依赖于所采用的失稳评判标准。目前边坡失稳判据的多样性及其不确定性,使得计算所得安全系数的合理性及其唯一性受到了质疑,因此如何选择或改进一种既能满足工程需要又易于操作的失稳判定准则显得尤为重要。针对某一典型边坡算例分别按计算收敛性、特征部位位移突变性和塑性区贯通性等3 个失稳判据考查判据的合理性及其适用性,对比研究三维与二维数值所得边坡稳定安全系数的差异,然后对位移突变失稳判据进行了一种改进,通过绘制位移突变倍率(当前分析步位移与上一分析步位移之比)跟折减系数的关系曲线来确定边坡安全系数,并通过简化的实例模型证明了其适用性。 相似文献
6.
This paper presents a numerical technique for the analysis of the cone penetration test by means of the commercial finite element code ABAQUS. The von Mises yield criterion with its associated flow rule is assumed to model the plastic behaviour of elastoplastic undrained clays. An explicit finite element scheme is used to efficiently perform a large number of loading increments and to simplify the treatment of contact. An Arbitrary Langrangian–Eulerian (ALE) scheme is adopted to preserve the quality of mesh throughout the numerical simulation. A volumetric weighting algorithm adjusts the relative positions of nodes after each loading increment. This prevents mesh over distortion and allows the simulation to run continuously. The variation of the cone resistance is examined in relation to various parameters such as the in situ stress state, shaft and cone face roughness, and the material strength when steady state conditions have been reached. The trends of these variations are highlighted and compared with those found by other researchers. This technique can be extended to analyse the plastic behaviour of elastoplastic sands often modelled using either the Drucker–Prager yield criterion or a critical state model. 相似文献
7.
A finite strain solution for the elastoplastic ground response curve in tunnelling: rocks with non‐linear failure envelopes 
下载免费PDF全文
下载免费PDF全文 Apostolos Vrakas 《国际地质力学数值与分析法杂志》2017,41(7):1077-1090
This paper generalizes the finite strain Coulomb solution of Vrakas and Anagnostou (Int J Numer Anal Meth Geomech 2014; 38(11): 1131–1148) for the classic tunnel mechanics problem of the ground response curve to elastoplastic grounds satisfying a non‐linear Mohr's failure criterion. A linear (Coulomb‐type) plastic potential function is used, leading to a non‐associated flow law, and edge plastic flow is considered in the plastic zone. The solution for a general non‐linear Mohr's failure criterion is semi‐analytical in that it requires the evaluation of definite integrals. In the special case of the Hoek–Brown criterion, however, these integrals are calculated analytically, resulting in a rigorous closed‐form series solution. The applicability of the derived solution is illustrated through the example of the Yacambú‐Quibor tunnel, where very large deformations were observed when crossing of weak graphitic phyllites. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
8.
在实际隧道施工过程中,隧道开挖引起地下岩体应力重分布使得围岩的微裂纹扩展损伤,并伴随有塑性流动变形。在地下水环境中对于孔隙和微裂隙围岩介质受到应力作用时,在内部将产生高孔隙水压力影响岩石的力学性质,也改变了围岩的破坏模式。为了研究损伤引起的刚度退化和塑性导致的流动两种破坏机制的耦合作用,从弹塑性力学和损伤理论的角度出发,同时引入修正有效应力原理来考虑孔隙水压力的作用,建立基于Drucker-Prager屈服准则的弹塑性损伤本构模型;针对该本构模型推导了孔隙水压力作用下弹塑性损伤本构模型的数值积分算法-隐式返回映射算法,分别对预测应力返回到屈服面的光滑圆锥面或尖点奇异处两种可能的情况给出了详细的描述,隐式返回映射算法具有稳定性和准确性的特点;大多数弹塑性损伤模型中涉及参数多且不易确定的问题,采用反分析方法获得损伤参数,解决了损伤参数不易确定的难题;采用面向对象的编程方法,使用C++语言编制了弹塑性损伤本构求解程序,并对所建立的弹塑性损伤模型和所编程序进行了试验和数值两个方面的验证;最后将其在吉林抚松隧道工程中进行应用,模拟了塑性区和损伤区的发展变化。研究结果表明：所建立的弹塑性损伤本构模型能够较好地描述岩石的力学性能、塑性和损伤变化趋势,所编程序能够进行实际工程问题的模拟,对现场施工给予一定的指导。 相似文献
9.
岩盐弹塑性损伤耦合模型研究 总被引：5，自引：1，他引：4
岩盐力学模型是进行能源岩盐储存工程稳定性分析的基础,而损伤和塑性机制并存且相互耦合是岩盐力学行为的基本特点。采用云应岩盐,进行了多组围压条件下的三轴压缩试验,分析了不同围压下岩盐的变形特征。在试验分析的基础上,提出了一种能够描述岩盐特性的弹塑性损伤耦合的模型,该模型描述了岩盐损伤的演化和塑性变形的耦合关系,并引入了一种非关联的塑性流动法则来描述岩盐从塑性体积压缩到膨胀的转化。采用该模型对在三轴压缩下的岩盐应力-应变关系进行了模拟分析,并与试验数据进行了对比,结果表明该模型能够较好地描述岩盐的主要力学和变形特性。 相似文献
10.
Based on the unsaturated triaxial experiments for the intact fourth period Middle Pleistocene Epoch loess (Q2l loess), the mechanical characteristic of Q2l loess is studied. According to the continuum damage mechanics and elastic–plastic theory, the damage potential function and loading function were deduced. Besides, plastic deformation and irreversible damage deformation are supposed to obey Hyushin’s postulate. The elastoplastic damage constitutive model and damage evolution law of the unsaturated intact Q2 loess are set up. Comparing the experiment curves with the computation result of this model, it is shown that the model can stimulate the mechanics characteristics of Q2 loess well. 相似文献
11.
12.
13.
We present a numerical modelling of elastoplastic damage due to drying shrinkage of concrete in the framework of mechanics of partially saturated porous media. An elastoplastic model coupled with isotropic damage is first formulated. Two plastic flow mechanisms are involved, controlled by applied stress and suction, respectively. A general concept of net effective stress is used in take into account effects of capillary pressure and material damage on stress‐controlled plastic deformation. Damage evolution depends both on elastic and plastic strains. The model's parameters are determined or chosen from relevant experimental data. Comparisons between numerical simulations and experimental data are presented to show the capacity of model to reproduce mains features of concrete behaviour under mechanical loading and during drying shrinkage of concrete. An example of application concerning drying of a concrete wall is finally presented. The results obtained allow to show potential capacity of proposed model for numerical modelling of complex coupling processes in concrete structures. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
14.
大理岩弹塑性耦合特性试验研究 总被引：6，自引：0，他引：6
大量研究表明,岩石经历塑性变形时其弹性参数会发生变化,即存在弹塑性耦合现象。为了研究岩石的弹塑性耦合特性,进行了两种大理岩的循环加、卸载试验。试验结果表明:与常规试验对比,循环加、卸载试验对岩石的变形、强度及破坏形态影响较小;弹性参数随塑性变形的变化显著,考虑弹塑性耦合时,弹性参数取体积模量和剪切模量更为合适;基于Mohr-Coulomb屈服准则,计算得到了强度参数,即黏聚力和内摩擦角随塑性内变量的演化规律。所得结论将为岩石弹塑性耦合本构模型的建立提供基本的试验支持。 相似文献
15.
在大量旁压试验数据分析的基础上,通过曲线拟合,建立了旁压试验弹塑性阶段曲线的椭圆方程,利用土体SMP屈服准则和Rowe流动法则,推导出土体塑性阶段应力增量与应变增量间关系矩阵。在弹性阶段,假设土体应力-应变服从广义虎克定律,建立了基于旁压试验的土体弹塑性本构模型。编制了相应的计算程序,将文中模型计算结果与实际旁压试验曲线进行对比,初步验证了模型的正确性。将本构模型编译为ABAQUS自定义材料子程序UMAT,通过有限元对比分析,文中模型计算变形较弹性模型小,较摩尔-库仑模型大,与模型建立的假设一致。基于旁压试验的土体弹塑性本构模型参数少,且易于获取,便于在实际工程中应用。 相似文献
16.
在冻融条件下岩石微裂隙中的水发生相变,体积膨胀,对微裂隙产生很大的冻胀力,当冻胀力超过岩石的抗拉强度时,微裂隙扩展。温度升高时,水又进入新的微裂隙,如此反复循环造成了岩石的损伤。据此,将岩石中的微裂隙等效为扁平状椭圆裂隙,基于断裂力学建立了单条微裂隙下裂隙扩展长度与冻胀力的关系,考虑岩石中微裂隙的分布,将岩石冻融条件下的应变分解为初始损伤应变、附加损伤应变和塑性应变,建立了弹塑性冻融损伤本构模型。最后,通过岩石冻融试验对该模型的合理性进行了验证,结果表明,该模型能够较好地模拟岩石在不同冻融次数下的应力-应变关系曲线。 相似文献
17.
关于强度折减有限元方法中边坡失稳判据的讨论 总被引：100，自引：18，他引：82
在边坡稳定性分析中采用强度折减弹塑性有限元方法时,所得到的总体安全系数在一定程度上依赖于所采用的失稳评判标准,通常以数值计算的收敛性作为边坡失稳判据。而有限元计算的数值收敛性受多种因素的影响,因而由此所得到的安全系数的合理性及其唯一性受到了质疑。为了考查目前各种失稳判据的合理性及其适用性,分别依据计算的收敛性、特征部位位移的突变性和塑性区的贯通性等3个失稳判据,针对某一典型边坡算例,采用强度折减弹塑性有限元方法进行稳定性分析,并与Spencer极限平衡法所得到的总体安全系数进行了对比。对比分析表明,以有限元数值计算的收敛性作为失稳判据在某些情况下所得到的安全系数可能误差较大,而采用特征部位位移的突变性或塑性区的贯通性作为失稳判据所得到的边坡安全系数与Spencer极限平衡法的计算结果比较接近,考虑到实用性与简便性,建议在边坡稳定性分析的强度折减有限元方法中联合采用特征部位位移的突变性和塑性区的贯通性作为边坡的失稳判据。 相似文献
18.
The paper presents a new fully coupled elastoplastic solution for the response of a poroelastic thick-walled soil cylinder around an elastoplastic stone column using Biot’s (J Appl Phys 12:155–164, 1941) consolidation theory. A unit cell concept is adopted for the soil–stone column analysis, and the problem is formulated in cylindrical coordinates. Expressions for excess pore pressure, stresses and displacements in the Laplace domain are derived analytically taking into account elastic or plastic behavior of the column. The inverse of the Laplace transform is evaluated numerically using an efficient scheme to obtain the final elastoplastic solution in time domain. The validity of the new solution has been checked against finite element solution and compared with some previously developed analytical methods for the stone column analysis. The results showing settlements, change in excess pore pressures and stresses with time are presented in terms of time factor. The proposed solution can be used to calculate transient state of settlements, distribution of deformations, stresses and excess pore pressures in soil and column under instantaneous or time-dependent monotonically increasing rigid vertical load. 相似文献
19.
In this paper, liquefaction potential of loose sand deposit subjected to an earthquake loading is evaluated. The analysis is performed by using a finite element technique incorporating the equations of dynamics of saturated porous elastoplastic media. The soil response is modelled by an anisotropic hardening rule, similar to that as proposed by Poorooshasb and Pietruszczak.1 The concept is based on the theory of bounding surface plasticity incorporating a non-associated flow rule and the idea of reflected plastic potential. The present paper provides a modified formulation to that discussed in Reference 1. Modifications are aimed at simplifying the concept for numerical implementations. 相似文献
20.
边坡的破坏过程是由土体局部破坏向整体失稳发展的过程,其塑性区的开展及其水平位移增量的变化较完美地展现了这个过程。根据边坡的实际破坏和有限元数值模拟情况,提出了以特征点位移增量的突变及塑性区贯通作为边坡的失稳判断准则;并以此为判据,采用基于强度折减的大变形有限元方法分析了土质边坡的破坏及稳定性。研究表明,采用强度折减有限元法可有效分析边坡的破坏及其稳定性;此外还分析了带有软弱夹层黏土边坡的破坏性状及其稳定性,并比较了大、小变形有限元的计算结果,结果表明,带有软弱夹层黏土边坡的破坏性状随软弱夹层土体性质的变化而变化,由大小变形有限元分析得到的边坡稳定安全系数较为一致,但边坡的破坏机制随软弱夹层土体性质变化的转变点不同。 相似文献