基于星载SAR信号的TEC反演新方法          下载免费PDF全文

王成  张民  许正文  毛聪  陈春 《地球物理学报》2014,57(11):3570-3576

由于星载合成孔径雷达(SAR)系统工作于电离层之上,其信号不可避免地将受到电离层的影响. 背景电离层以及电离层电子密度不规则体多重散射效应可引起距离向图像质量的下降, 在强起伏情况下, 多重散射效应对信号的延迟影响不可忽略. 针对此问题, 本文提出了一种基于SAR回波信号的三频相位自适应TEC反演新方法, 利用反演的结果对电离层的影响进行校正. 给出了校正前后的点目标成像仿真, 结果显示此方法充分考虑了多重散射效应引起的TEC估计误差, 可以有效地补偿电离层对距离向成像的影响, 提高了距离向点目标图像质量.  相似文献   

吉林省夹皮沟金矿带几个重要地质问题的讨论   总被引：1，自引：0，他引：1       下载免费PDF全文

谢宏远  沈远超  焦旭东  孟庆瑜 《地质科学》2000,35(1):111-120

夹皮沟金矿带位于吉林省东南部桦甸地区。自1820 年发现以来,已累计探明黄金地质储量150 吨左右。该金矿带位于中朝古板块北缘东段与布列亚-佳木斯地块南缘的碰撞对接部位附近。区内发育5 条平行的NW 向含矿构造带,其北端均以锐角交汇于挥发河断裂。有别于前人的研究成果,本文提出夹皮沟金矿带恰好位于高级区与夹皮沟花岗-绿岩带的接触部位,形成以夹皮沟金矿化带为中心的矿化分带。夹皮沟金矿带为中生代成矿,夹皮沟NW 向弧形构造片理化带及其上盘扇状断裂系控制着金矿床的分布。在主要NW 构造带之间,还存在一系列与之平行的次级构造,它们与扇状断裂的交汇点及扇状构造系中的横向应力集中带是金矿化定位的有利部位。  相似文献   

Controls on suspended‐sediment transfer at a high‐arctic glacier,determined from statistical modelling     

Richard Hodgkins 《地球表面变化过程与地形》1999,24(1):1-21

Simple linear regression models have been widely employed in the analysis of suspended‐sediment concentration (SSC) time series from glacierized catchments, although they have many limitations. This paper builds regression models which address these shortcomings and permit inferences concerning the controls on suspended‐sediment transfer from a glacier at 78°N in the Svalvard archipelago. A bivariate regression model, deterministically predicting SSC from discharge alone, explained less than 15 per cent of the variance in SSC. A multivariate model, incorporating additional potentially explanatory variables, offered little improvement. Diurnal hysteresis in the data gives rise to quasi‐autocorrelation in the residual series from regression models. This was effectively removed by incorporating dummy diurnal variables into the multivariate model. The presence of a first‐order autoregressive, stochastic process gives rise to true autocorrelation in the residual series from regression models. This was accommodated by incorporating an ARIMA (1,0,0) term into a multivariate autoregression model. The model‐building process yielded a systematic progression in the explanation of variance in SSC, stripping away pattern in the autocorrelation function of the residual series; mean model error was reduced from 54 per cent to 6 per cent. The dependence of SSC on the magnitude of discharge is weak and highly variable, whereas the dependence of current SSC on recent values of SSC, revealed through the stochastic term, is an order of magnitude greater and relatively constant during the melt season. The dominant control on SSC throughout the melt season is therefore short‐term sediment availability. The simple and largely unchanging stochastic process generally responsible for generating the observed SSC series implies a simple and unchanging glacier drainage system. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

Predictive optimal control for seismic analysis of non-linear and hysteretic structures     

K. Huang  R. Betti 《地震工程与结构动力学》1999,28(6):585-607

In this paper, an effective active predictive control algorithm is developed for the vibration control of non-linear hysteretic structural systems subjected to earthquake excitation. The non-linear characteristics of the structural behaviour and the effects of time delay in both the measurements and control action are included throughout the entire analysis (design and validation). This is very important since, in current design practice, structures are assumed to behave non-linearly, and time delays induced by sensors and actuator devices are not avoidable. The proposed algorithm focuses on the instantaneous optimal control approach for the development of a control methodology where the non-linearities are brought into the analysis through a non-linear state vector and a non-linear open-loop term. An autoregressive (AR) model is used to predict the earthquake excitation to be considered in the prediction of the structural response. A performance index that is quadratic in the control force and in the predicted non-linear states, with two additional energy related terms, and that is subjected to a non-linear constraint equation, is minimized at every time step. The effectiveness of the proposed closed-open loop non-linear instantaneous optimal prediction control (CONIOPC) strategy is presented by the results of numerical simulations. Since non-linearity and time-delay effects are incorporated in the mathematical model throughout the derivation of the control methodology, good performance and stability of the controlled structural system are guaranteed. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

线性关联滞后广义大系统的变结构控制     

高存臣  郭继峰 《中国海洋大学学报(自然科学版)》2005,35(5):757-760

研究了一类线性关联滞后广义大系统的变结构控制综合问题.首先根据系统的结构和控制输入的特定形式,引入了1种新的受限系统等价分解形式,把每个子系统分解成2个低维的动态子系统：1个是不带控制项的线性关联微分差分系统,另1个是带有控制项的线性关联差分系统.然后设计了带有积分动态补偿器的切换函数, 给出了滑动模渐近稳定的充分条件.最后设计了可以保证系统的解的轨迹到达切换流形的多层分散变结构控制.这种控制对物理上分散等类型的线性关联滞后广义系统是合理的有效的.  相似文献   

Landsat 8全色影像阴影的扁平冰山出水高度提取     

关真富  程晓  刘岩  璩榆桐  李腾 《遥感学报》2022,26(7):1450-1458

冰山出水高度是测量冰山厚度进而估算冰山体积的一个重要几何参数,是定量评估冰山对海洋的淡水输入量的基础。冬季冰山在海冰上成影且阴影较长,本文提出利用阴影测高模型高精度测量冰山出水高度的方法。试验选择2016年8月29日、9月7日和9月16日中心太阳高度角分别为5.43°、7.49°和11.01°的3期Landsat 8全色15 m影像,以独立扁平冰山为例,自动提取冰山在海冰上的阴影长度计算冰山出水高度,并利用不同时相同名成影点进行交叉验证评估测量精度。结果显示：阴影长度测量误差优于1个像元,在太阳高度角低于11.01°时,全色15 m影像提取的冰山出水高度均方根误差（RMSE）低于2.0 m,平均绝对误差（MAE）低于1.5 m。由此表明：在冬季低太阳高度角下,Landsat 8全色15 m影像可用于高精度测量冰山出水高度,具有大范围测量南极冰山出水高度的潜力。  相似文献   

关于干旱监测评估指标的一种新探讨   总被引：10，自引：1，他引：9  

庞万才  周晋隆  王桂芝 《气象》2005,31(10):32-34

从有效降水过程观点入手,针对降水过程次数、降水过程总量,尤其是降水过程的时间分布结构和效能,提出了一种新的干旱指数式。该结果在干旱研究分析、监测评估业务和决策服务中都有实用意义。  相似文献   

East Asia winter monsoon variations on a millennial time‐scale before the last glacial–interglacial cycle     

Huayu Lu  Ko Van Huissteden  Zhisheng An  Govert Nugteren  Jef Vandenberghe 《第四纪科学杂志》1999,14(2):101-110

Grain size and magnetic susceptibility measurements on samples from a typical loess–palaeosol sequence on the central Chinese Loess Plateau are used to reconstruct the Pleistocene East Asian monsoon climate. The coarse‐grained fraction, i.e. the weight percentage > 30 μm of the bulk grain‐size distribution, is used as a sensitive proxy index of the East Asia winter monsoon strength. On the basis of an absolute time‐scale, time‐series variations of this proxy show that winter monsoon strengths varied on millennial time‐scales during the periods 145–165, 240–280, 320–350, 390–440, 600–640, 860–890, 900–930 and 1330–1400 kyr BP. The wavelength of these climatic oscillations varied between 1.89 and 4.0 kyr, as is shown by spectral analysis using the multitaper method. Although numerical simulation experiments show that high frequencies also can arise from measurement errors in the grain‐size analysis, the frequencies prove to be sufficiently stable when the spectral analysis is repeated with a different number of tapers. For the time being, we do not correlate these climatic oscillations with palaeoclimatic records in the North Atlantic deep‐sea sediments because both time‐scales need to be further improved. Our data, however, certainly demonstrate that millennial‐scale East Asian winter monsoon variations in the last 1.4 million years can be detected from terrestrial loess records. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

基于Born敏感核函数的VTI介质多参数全波形反演   总被引：1，自引：4，他引：1       下载免费PDF全文

刘玉柱  王光银  杨积忠  董良国 《地球物理学报》2015,58(4):1305-1316

本文基于VTI介质拟声波方程,利用散射积分原理,在Born近似下导出了速度与各向异性参数的敏感核函数,同时结合作者前期研究提出的矩阵分解算法实现了一种新的VTI介质多参数全波形反演方法.矩阵分解算法通过对核函数-向量乘进行具有明确物理含义的向量-标量乘分解累加运算实现目标函数一阶方向或二阶方向的直接求取,从而避免了庞大核函数矩阵与Hessian矩阵的存储,该方法同时可以大大降低常规全波形反演在计算二阶方向时的庞大计算量.为了克服不同参数对波场影响程度的不同,本文利用作者前期在VTI介质射线走时层析成像研究中提出的分步反演策略实现了多参数联合全波形反演.理论模型实验表明,本文提出的基于Born敏感核函数的各向异性矩阵分解全波形反演方法可以获得较好的多参数反演结果.  相似文献   

粉质黏土填料在K30试验加载进程中的变形时间效应状态分析     

熊勇  罗强  张良  蒋良潍  朱江江 《岩土力学》2018,39(3):863-871

变形稳定标准和分级加载制度是影响K30试验效率和准确性的关键因素,与加载进程中填土的变形时间效应状态密切相关。开展了3组最优含水率下压实系数K分别为0.90、0.95和1.00填土模型的小型平板载荷试验,获得了不同荷载作用下填土变形时程曲线和弹塑性变形数据,讨论了在K30试验加载进程中填土变形状态的变化及其对加载稳定时间的影响。试验表明：良好压实的粉质黏土填料,在K30试验进程中的变形以弹性为主,处于缓慢收敛状态,随着加载级数增加,塑性变形比例逐渐增大,变形时间效应呈现出由微弱进入明显状态的演化趋势,变形1.25 mm对应于缓慢收敛中的微弱时间效应亚状态;“变形速率不超过0.01 mm/min”变形稳定标准分级加载时间随时间效应指数呈加速增长规律,能在保证试验精度的基础上提高试验效率;以最大荷载下填土变形时间效应不应超过显著状态、变形量不小于1.25 mm为约束条件,针对5级加载、0.04 MPa荷载增量的加载制度,可得K30试验的适宜范围为60～160 MPa/m。  相似文献