地下水非稳定流的LTFAM算法     

王文科  李俊亭 《地球科学与环境学报》1993,(4)

渗流域内应用拉普拉斯变换(LT)建立相应的有限分析(FAM)方程,顾及渗流域内地下水流的初始条件和边界条件,可在LT空间构成一个封闭的以水头像函数为变量的线性方程组。将此方程组所得的解,通过Stehfest数值反演公式,可归化为时间域的解(水头)。由于时间t被隐含在数值方程内,从而克服了传统数值法按时段(△t)逐步迭代的缺陷,提高了计算效率,也为用嵌入法建立地下水流管理模型提供了一条捷径。  相似文献   

含煤层地质环境下地震波场的数值模拟   总被引：3，自引：2，他引：1  

潘冬明  杨顶辉 《地球物理学进展》1997,12(1):74-83

本文对含低速煤层地质环境下弹性波场多波多分量地震资料进行了二维数值模拟研究,对人工边界反射进行了有效处理,频散效应得到了有效的压制,对几种不同激发与观测排列方式下的弹性波资料进行了模型计算与分析。  相似文献   

地震短临综合预报方法的研究     

李文英  平建军 《华北地震科学》1995,13(3):36-43

本文在《中国震例》资料基础上,详细分析了华北地区１７次中强以上地震前的短临异常,得到华北地区中强以上地震短临异常的三个综合特征,在归纳出短临异常综合特征的基础上,提出了两个判定孕震过程、前兆异常由中期向短期过渡的定量的综合标志。据中期异常的追踪分析和短临异常综合分析相结合的原则,定义并计算了综合预报指标Ｓ值,以此值作为是否发生中强以上地震的判据。本文的重点是在分析短临异常综合特征的基础上,结合实用  相似文献   

关于地震预报科学思路,方法论及难点的思考   总被引：3，自引：0，他引：3  

陈立德 《地震研究》1992,15(2):186-192

中国地震预报的科学思路为整体观指导下的异常群体阶段性追踪预报模式。在方法论方面强调了宏观唯象方法的重要性,认为利用地震学、地球物理、地壳形变和地球化学等资料,采用统计识别的方法来寻找地震前兆、进行三要素预报是解决孕震过程这类复杂系统的较好方法。同时指出,地震成因、震源孕育物理力学过程、前兆成因机制、临震阶段起主宰作用的变量等是地震预报的难关所在。临震阶段潮汐力、气压、降水等这些平时视为干扰因素的变化,可能成为发震的触发调制因素。从而增加了前兆的复杂性,在排除干扰时应特别注意。  相似文献   

“煤特征指数”与矿井瓦斯危险类型的关系     

张世平 《煤田地质与勘探》1992,20(6):36-39

矿井瓦斯危险程度与煤层中瓦斯赋存状况及其泄出方式有关,并取决于多种地质条件和采掘工艺。其中,煤特征条件特别重要。本文分析了湖南省的5种矿井瓦斯危险类型以及相应的煤特征条件,提出了“煤特征指数(I_c)”这一概念。I_c是一项评价矿井瓦斯危险程度的综合指标。研究表明,矿井瓦斯危险愈严重,则其I_c值愈高。应用该项成果预测了16对矿井的瓦斯危险类型,取得了满意的效果。  相似文献   

Comparison of structural and least-squares lines for estimating geologic relations   总被引：1，自引：0，他引：1  

Garnett P. Williams  Brent M. Troutman 《Mathematical Geology》1990,22(8):1027-1049

Two different goals in fitting straight lines to data are to estimate a true linear relation (physical law) and to predict values of the dependent variable with the smallest possible error. Regarding the first goal, a Monte Carlo study indicated that the structural-analysis (SA) method of fitting straight lines to data is superior to the ordinary least-squares (OLS) method for estimating true straight-line relations. Number of data points, slope and intercept of the true relation, and variances of the errors associated with the independent (X) and dependent (Y) variables influence the degree of agreement. For example, differences between the two line-fitting methods decrease as error in X becomes small relative to error in Y. Regarding the second goal—predicting the dependent variable—OLS is better than SA. Again, the difference diminishes as X takes on less error relative to Y. With respect to estimation of slope and intercept and prediction of Y, agreement between Monte Carlo results and large-sample theory was very good for sample sizes of 100, and fair to good for sample sizes of 20. The procedures and error measures are illustrated with two geologic examples.  相似文献   

FS方法及其在综合多项震兆中的应用   总被引：1，自引：0，他引：1       下载免费PDF全文

范洪顺  王碧泉 《地球物理学报》1990,33(3):297-307

本文提出了一种模式识别方法--FS方法.该方法的特征取为某些论域上的模糊子集.先以每三个原始特征组成子分类器的特征集,“训练”这些分类器,然后对子分类器进行筛选,最后用筛选出的子分类器的“软”分类结果的加权平均作为判别函数,形成总的分类决策.将FS方法应用于综合多项震兆,并进行了一系列控制试验,还与地震学中几种常用的方法进行了对比试验.结果表明,FS方法是稳定和有效的.  相似文献   

Increasing critical sensitivity of the Load/Unload Response Ratio before large earthquakes with identified stress accumulation pattern   总被引：2，自引：0，他引：2  

Huai-zhong Yu  Zheng-kang Shen  Yong-ge Wan  Qing-yong Zhu  Xiang-chu Yin   《Tectonophysics》2006,428(1-4):87-94

The Load/Unload Response Ratio (LURR) method is proposed for short-to-intermediate-term earthquake prediction [Yin, X.C., Chen, X.Z., Song, Z.P., Yin, C., 1995. A New Approach to Earthquake Prediction — The Load/Unload Response Ratio (LURR) Theory, Pure Appl. Geophys., 145, 701–715]. This method is based on measuring the ratio between Benioff strains released during the time periods of loading and unloading, corresponding to the Coulomb Failure Stress change induced by Earth tides on optimally oriented faults. According to the method, the LURR time series usually climb to an anomalously high peak prior to occurrence of a large earthquake. Previous studies have indicated that the size of critical seismogenic region selected for LURR measurements has great influence on the evaluation of LURR. In this study, we replace the circular region usually adopted in LURR practice with an area within which the tectonic stress change would mostly affect the Coulomb stress on a potential seismogenic fault of a future event. The Coulomb stress change before a hypothetical earthquake is calculated based on a simple back-slip dislocation model of the event. This new algorithm, by combining the LURR method with our choice of identified area with increased Coulomb stress, is devised to improve the sensitivity of LURR to measure criticality of stress accumulation before a large earthquake. Retrospective tests of this algorithm on four large earthquakes occurred in California over the last two decades show remarkable enhancement of the LURR precursory anomalies. For some strong events of lesser magnitudes occurred in the same neighborhoods and during the same time periods, significant anomalies are found if circular areas are used, and are not found if increased Coulomb stress areas are used for LURR data selection. The unique feature of this algorithm may provide stronger constraints on forecasts of the size and location of future large events.  相似文献   

Engineering geological studies and tunnel support design at Sulakyurt dam site, Turkey   总被引：2，自引：0，他引：2  

H. Basarir 《Engineering Geology》2006,86(4):225-237

This paper presents the results of engineering geological investigations and tunnel support design studies, carried out at the Sulakyurt dam site, northeast of Ankara, Turkey. The Sulakyurt dam will be used for flow control and water storage for irrigation projects. Studies were carried out both in the field and the laboratory. Field studies include engineering geological mapping, intensive discontinuity surveying, core drilling and sampling for laboratory testing. The diversion tunnel will be driven in rock mass, consisting of granite and diorite. Empirical, analytical and numerical methods were combined for safe tunnel design. Rock mass rating (RMR), Rock mass quality (Q) and Geological strength index (GSI) systems were used for empirical rock mass quality determination, site characterization and support design. The convergence–confinement method was used as analytical method and software called Phase², a 2D finite element program, was utilized as numerical method. According to the results acquired from the empirical, analytical and numerical methods, tunnel stability problems were expected in both granite and diorite rock masses. The support system, suggested by empirical methods, was applied and the performance of suggested support system was evaluated by means of numerical modelling. It was concluded that the suggested support systems were adequate, since after applying the suggested support system to granite and diorite, tunnel deformation and the yielded elements around the tunnel decreased significantly. Thus, it is suggested that for more reliable support design empirical, numerical and analytical methods should be combined.  相似文献   

Testing earthquake prediction methods: «The West Pacific short-term forecast of earthquakes with magnitude MwHRV ≥ 5.8»     

V.G. Kossobokov   《Tectonophysics》2006,413(1-2):25

Analyzing the tables and probability maps posted by Yan Y. Kagan and David D. Jackson in April 2002–September 2004 at http://scec.ess.ucla.edu/~ykagan/predictions_index.html and the catalog of earthquakes for the same period, the conclusion is drawn that the underlying method could be used for prediction of aftershocks, while it does not outscore random guessing when main shocks are considered.  相似文献