Modelling the effects of temperature and food on individual growth and reproduction of Daphnia and their consequences on the population level     

Karsten Rinke  Thomas Petzoldt 《Limnologica》2003,33(4):293-304

Individual based simulations of population dynamics require the availability of growth models with adequate complexity. For this purpose a simple-to-use model (non-linear multiple regression approach) is presented describing somatic growth and reproduction of Daphnia as a function of time, temperature and food quantity. The model showed a good agreement with published observations of somatic growth (r² = 0.954, n = 88) and egg production (r² = 0.898, n = 35). Temperature is the main determinant of initial somatic growth and food concentration is the main determinant of maximal body length and clutch size. An individual based simulation was used to demonstrate the simultaneous effects of food and temperature on the population level. Evidently, both temperature and food supply affected the population growth rate but at food concentrations above approximately 0.4 mg Cl⁻¹ Scenedesmus acutus temperature appeared as the main determinant of population growth.

Four simulation examples are given to show the wide applicability of the model: (1) analysis of the correlation between population birth rate and somatic growth rate, (2) contribution of egg development time and delayed somatic growth to temperature-effects on population growth, (3) comparison of population birth rate in simulations with constant vs. decreasing size at maturity with declining food concentrations and (4) costs of diel vertical migration. Due to its plausible behaviour over a broad range of temperature (2–20 °C) and food conditions (0.1–4 mg Cl⁻¹) the model can be used as a module for more detailed simulations of Daphnia population dynamics under realistic environmental conditions.  相似文献   

Physical model for dynamic analysis of structures with FPS isolators     

Jos L. Almazn  Juan C. De la Llera 《地震工程与结构动力学》2003,32(8):1157-1184

This article presents a physical model for frictional pendulum isolators (FPS) that is ready to be implemented in most commercial software. The model is capable of accounting for effects such as large deformations, sticking, and uplift and impact by sensing the normal loads in the isolators through a gap element. Sticking has been incorporated into the model by extending the Park–Wen hysteretic model to the case of large deformations. The proposed model has been tested against a theoretically ‘exact’ formulation leading to essentially identical results. To facilitate its use, the physical FPS model has been cast into a typical non‐linear structural element format, i.e. with deformation as input and restoring force as output. Examples of a building and a bridge have been chosen to show the potential of the element and to provide further insight into the earthquake response of structures with FPS isolators; in particular, in aspects such as the orientation in placement of the isolator, sticking, P? Δ, and other large deformation effects. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Application of extended distinct element method with lattice model to collapse analysis of RC bridges     

Limin Sun  Cen Zhou  Dong Qin  Lichu Fan 《地震工程与结构动力学》2003,32(8):1217-1236

This paper proposes a simple lattice model for collapse analysis of RC bridges subjected to earthquakes by using the extended distinct element method (EDEM). In the model, a concrete element consists of lumped masses connected to one another by springs, and a reinforcement bar is represented by a discrete model or an integrated model. The proposed lattice model is simple but its parameters are reasonably defined. It has fewer element nodes and connecting springs, which will be of benefit by shortening the CPU time. The processes to determine the initial stiffness of concrete and steel springs, the parameters of the constitutive model and the fracture criteria for springs are described. A re‐contact spring model is also proposed to simulate the re‐contact of the concrete after fracture of springs; and a general grid searching method is used to decrease the CPU time for judging re‐contact after fracture. The lattice model is assessed by numerical simulations and experiments. As an application, a damaged single‐column pier subjected to the Kobe Earthquake in 1995 is analysed by EDEM with the proposed model. The simulation results indicate that the proposed model predicts well qualitatively the collapse process of RC bridges. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Cyclic tests on large‐scale models of existing bridge piers with rectangular hollow cross‐section     

A. V. Pinto  J. Molina  G. Tsionis 《地震工程与结构动力学》2003,32(13):1995-2012

Cyclic tests on two large‐scale models of existing bridge piers with rectangular hollow cross‐section were performed in the ELSA laboratory. The prototype structure is an existing reinforced concrete highway bridge constructed in Austria in 1975. The piers presented several seismic deficiencies and consequently they showed poor hysteretic behaviour and limited deformation capacity as well as undesirable failure modes that do not comply with the requirements of modern codes for seismic‐resistant structures. Experimental data are compared to numerical and empirical predictions. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

最优化的矿物扩散地质速率计:北大别黄土岭麻粒岩缓慢冷却的证据   总被引：2，自引：0，他引：2  

程昊  陈道公  Weiji Cheng  吴元保  黄升 《地球化学》2003,32(2):167-172

对北大别黄土岭麻粒岩中石榴子石进行了详细的电子探针工作，并根据一颗石榴子石的成分环带，建立了扩散模型并进行了数值模拟，结合最优化的方法，得到了极其缓慢的冷却速率0.1℃/a。从扩散动力学数值模拟的角度对大别山造山带的冷却速率进行了探索性研究。该结果表明，黄土岭麻粒岩在受麻粒岩相改造后经历的是一个极其缓慢、持续时间很长的冷却过程。  相似文献   

Lateral tidal mixing in the Antarctic marginal seas     

Aike Beckmann  Adriene F. Pereira 《Ocean Dynamics》2003,53(1):21-26

Tidal mixing plays an important role in the modification of dense water masses around the Antarctic continent. In addition to the vertical (diapycnal) mixing in the near-bottom layers, lateral mixing can also be of relevance in some areas. A numerical tide simulation shows that lateral tidal mixing is not uniformly distributed along the shelf break. In particular, strong mixing occurs all along the Ross Sea and Southern Weddell Sea shelf breaks, while other regions (e.g., the western Weddell Sea) are relatively quiet. The latter regions correspond surprisingly well to areas where indications for cross-shelf exchange of dense water masses have been found. The results suggest that lateral tidal mixing may account for the relatively small contribution of Ross Sea dense water masses to Antarctic Bottom Water.  相似文献   

Aseismic negative dislocation model and deformation analysis of crustal horizontal movement during 1999——2001 in the northeast margin of Qinghai-Xizang block     

张希 江在森王琪  张晓亮 《地震学报(英文版)》2003,16(4):395-403

Through numerical simulation for GPS data, aseism/c negative dislocation model for crustal horizontal movement during 1999-2001 in the northeast margin of Qinghai-Xizang block is presented, combined with the spatial distri-bution of apparent strain field in this area, the characteristics of motion and deformation of active blocks and their boundary faults, together with the place and intensity of strain accumulation are analyzed. It is shown that: a) 9 active blocks appeared totally clockwise motion from eastward by north to eastward by south. Obvious sinistral strike-slip and NE-NEE relative compressive motion between the blocks separated by Qilianshan-Haiyuan fault zone was discovered; b) 20 fault segments (most of them showed compression) locked the relative motion between blocks to varying degrees, among the total, the mid-east segment of Qilianshan fault (containing the place where it meets Riyueshan-Lajishan fault) and the place where it meets Haiyuan fault and Zhuanglanghe fault, more favored accumulation of strain. Moreover, the region where Riyueshan-Lajishan fault meets north boundary of Qaidam block may have strain accumulation to some degree, c) Obtained magnitude of block velocities and locking of their boundaries were less than relevant results for observation in the period of 1993-1999.  相似文献   

NNR constraint in ITRF2000 and the new global plate motion model NNR-ITRF2000VEL   总被引：4，自引：0，他引：4  

朱文耀  符养  李彦  吴显兵 《中国科学D辑(英文版)》2003,46(Z2)

There are 54 sites employed by ITRF2000 for ITRF2000 orientation. The deficiencies are obvious. First, these sites cannot well represent the rotation rate of the earth crust because there is no selected site in five out of fourteen tectonic plates and three of fourteen plates only have one site each. Second, the total angular momentum of the crust is non-vanishing in ITRF2000, even though it is declared that No Net Rotation (NNR) with respect to NNR-NUVEL1A is imposed on ITRF2000 construction according to the documentations of ITRF2000. So the NNR condition in conventional terrestrial reference system (CTRS) realization cannot be satisfied in ITRF2000. In this paper, the criteria of site selection for estimating the Euler vectors are suggested; the Tisserand system constraint equation in ITRF construction is derived; and as a product, the global plate motions can be obtained from the ITRF2000 construction.  相似文献   

高填方路堤互锚式薄壁挡土墙土压力试验研究   总被引：1，自引：0，他引：1  

窦斌  梅利芳  范瑛  余天庆  杨凯华 《地质科技情报》2003,22(3):109-112

在山区修建高等级公路工程中，挡土墙结构广泛应用于高填方路堤工程。在提出一种新型互锚式薄壁挡土墙结构的基础上，通过埋设土压力盒的方法对该种挡土墙的结构型式进行了力学模型试验，并进行了模型土压力强度特性分析。试验及分析表明，该挡土墙结构成本低廉，施工方便，结构合理，可以应用于高填方路堤实际工程。  相似文献   

试论碳酸盐岩上覆红土的形成模式及演化趋势   总被引：14，自引：1，他引：14  

符必昌  黄英 《地质科学》2003,38(1):128-136

据长期对岩溶及红土化作用等的研究成果,本文全面系统地分析了碳酸盐岩上覆红土的形成及演化规律,提出了一个新的碳酸盐岩上覆红土的形成模式,进而深入阐明了碳酸盐岩上覆红土的演化规律及其在现代气候条件下的演化趋势等,在解决岩溶及红土学术界存在的碳酸盐岩上覆红土的形成、碳酸盐岩与上覆红土之间的相互关系及其发展演化规律等一系列重大疑难问题上向前迈进了一步,对相关学科的发展将产生积极的推动作用.  相似文献