有限区域大气-海浪耦合模式的建立及海表粗糙度参数化试验   总被引：1，自引：0，他引：1  

关皓  周林  王汉杰  景丽 《海洋学报》2008,30(4):30-38

利用LINUX操作系统下的进程通讯(IPC)技术将中尺度大气模式MM5(V3)与第三代海浪模式WW3进行双向耦合,建立考虑大气-海浪相互作用的风浪耦合模式,在耦合模式中引入3种海表粗糙度参数化方案,通过对一次热带气旋过程的模拟,研究大气-海浪相互作用对热带气旋系统的影响及耦合模式对海表粗糙度参数化方案的敏感性。结果表明:LINUX系统下的进程通讯技术可以方便有效地实现大气和海浪模式的双向耦合,模式运行稳定;耦合模式能够较好的模拟热带气旋的发展和演变过程及其影响下海浪场的分布和演变,模拟结果对海表粗糙度参数化方案较敏感;海浪的反馈作用同时影响了海气间的动力和热力作用过程,不同的海表粗糙度参数化方案下,海浪对两种作用过程不同的影响程度决定了其对气旋系统强度的影响。  相似文献   

A real-time, event-triggered storm surge forecasting system for the state of North Carolina   总被引：3，自引：0，他引：3  

Craig Mattocks  Cristina Forbes   《Ocean Modelling》2008,25(3-4):95-119

A new real-time, event-triggered storm surge prediction system has been developed for the State of North Carolina to assist emergency managers, policy-makers and other government officials with evacuation planning, decision-making and resource deployment during tropical storm landfall and flood inundation events. The North Carolina Forecast System (NCFS) was designed and built to provide a rapid response assessment of hurricane threat, accomplished by driving a high-resolution, two-dimensional, depth-integrated version of the ADCIRC (Advanced Circulation) coastal ocean model with winds from a synthetic asymmetric gradient wind vortex. These parametric winds, calculated at exact finite-element mesh node locations and directly coupled to the ocean model at every time step, are generated from National Hurricane Center (NHC) forecast advisories the moment they are inserted into the real-time weather data stream, maximizing the number of hours of forecast utility. Tidal harmonic constituents are prescribed at the open water boundaries and applied as tidal potentials in the interior of the ocean model domain. A directional surface roughness parameterization that modulates the wind speed at a given location based on the types of land cover encountered upwind, a forest canopy sheltering effect, and a spatially varying distribution of Manning’s–n friction coefficient used for computing the bottom/channel bed friction are also included in the storm surge model. Comparisons of the simulated wind speeds and phases against their real meteorological counterparts, of model elevations against actual sea surface elevations measured by NOAA tide gauges along the NC coast, and of simulated depth-averaged current velocities against Acoustic Doppler Current Profiler (ADCP) data, indicate that this new system produces remarkably realistic predictions of winds and storm surge.  相似文献   

A traversing system to measure bottom boundary layer hydraulic properties   总被引：1，自引：0，他引：1  

Ayub Ali  Charles J. Lemckert   《Estuarine, Coastal and Shelf Science》2009,83(4):425-433

This study describes a new convenient and robust system developed to measure benthic boundary layer properties, with emphasis placed on the determination of bed shear stress and roughness height distribution within estuarine systems by using velocity measurements. This system consisted of a remotely operated motorised traverser that allowed a single ADV to collect data between 0 and 1 m above the bed. As a case study, we applied the proposed traversing system to investigate bottom boundary layer (BBL) hydraulic properties within Coombabah Creek, Queensland, Australia. Four commonly-employed techniques: (1) Log-Profile (LP); (2) Reynolds stress (RS); (3) Turbulent Kinetic Energy (TKE); and (4) Inertial Dissipation (ID) used to estimate bed shear stresses from velocity measurements were compared. Bed shear stresses estimated with these four methods agreed reasonably well; of these, the LP method was found to be most useful and reliable. Additionally, the LP method permits the calculation of roughness height, which the other three methods do not. An average value of bed shear stress of 0.46 N/m², roughness height of 4.3 mm, and drag coefficient of 0.0054 were observed within Coombabah Creek. Results are consistent with that reported for several other silty bed estuaries.  相似文献   

Estimation of the wave-related ripple characteristics and induced bed shear stress   总被引：1，自引：0，他引：1  

Benoît Camenen   《Estuarine, Coastal and Shelf Science》2009,84(4):553-564

A large data set on ripples was collected and examined. A set of new formulas for the prediction of the ripple characteristics is proposed with an emphasis on the disappearance of the ripples. The ripple wavelength was observed to be proportional to the bottom wave excursion but also to be a function of the grain-related Shields parameter and wave period parameter introduced by Mogridge et al. (1994). The ripple steepness was found to be nearly constant for orbital ripples, and with a sharp decrease for suborbital ripples. Two empirical functions are added including the effects of the critical Shields parameters (inception of transport and inception of sheet flow), i.e. giving the boundaries for the ripple existence's domain. The proposed formulas yield better prediction capabilities compared to the previously published formulas, especially when ripples are washed out. The effect of the ripple characteristics on the roughness height and the calculation of the bed shear stress is also discussed. It appeared that the bed shear stress calculation is more sensitive to the empirical coefficient a_r introduced in the estimation of the ripple-induced roughness height or to the limits of existence of the ripples than the ripple characteristics themselves.  相似文献   

江苏大丰潮滩潮流边界层特征研究   总被引：7，自引：0，他引：7  

李占海  高抒  陈沈良 《海洋工程》2007,25(3):53-60

2003年7月中小潮期间使用MIDAS-400用户化数据采集系统在江苏大丰潮滩上进行了垂向多层位同步的流速和悬沙浓度观测。根据观测资料研究了潮流作用下的潮滩底部边界层过程,结果表明,观测地点的潮汐不对称现象十分明显,落潮流速、历时和输水输沙量皆明显大于涨潮;在潮周期内的多数时间里流速剖面符合对数分布,但在风力较强、水流快速增加和流速缓慢的情况下,流速剖面常偏离对数分布;悬沙颗粒垂向混合均匀,悬沙浓度剖面符合Rouse公式;落潮时的底部切应力和摩阻流速明显大于涨潮,摩阻流速与各水层流速通常有较好的线性关系;滩面糙度主要与沙纹形态和推移质运动强度有关,它与摩阻流速存在密切关系;悬沙浓度具有明显的减阻效应,受其影响,摩阻流速和底部切应力分别减小了28%~41%和40%~62%。  相似文献   

基于卫星遥感数据改进区域尺度的显热通量模型     

宋小宁  赵英时  冯晓明 《地理与地理信息科学》2007,23(1):36-38

以西北半干旱地区的内蒙古农牧交错地带锡林郭勒盟为研究区,以不同退化程度的草地为研究对象,通过叶面积指数计算各像元的动力传输粗糙度长度,以改进显热通量算法;并结合植被／土壤组分温度分别计算基于亚像元的植被／土壤的显热通量。由敏感性分析和模型验证表明,改进的显热通量算法能够提高区域尺度的能量平衡计算精度。  相似文献   

Numerical modeling investigation on turbulent oscillatory flow over a plane rough bed composed by randomly arrayed particles   总被引：1，自引：0，他引：1  

ZHOU Zhibo  ZHANG Jinfeng  ZHANG Qinghe  LIU Run 《海洋学报(英文版)》2018,37(7):62-68

A three-dimensional numerical model is established to simulate the turbulent oscillatory boundary layer over a fixed and rough bed composed by randomly arrayed solid spheres based on the lattice Boltzmann method and the large eddy simulation model.The equivalent roughness height,the location of the theoretical bed and the time variation of the friction velocity are investigated using the log-fit method.The time series of turbulent intensity and Reynolds stress are also investigated.The equivalent roughness height of cases with Reynolds numbers of 1×10~4–6×10~4 is approximately 2.81 d(grain size).The time variation of the friction velocity in an oscillatory cycle exhibits sinusoidal-like behavior.The friction factor depends on the relative roughness in the rough turbulent regime,and the pattern of solid particles arrayed as the rough bed in the numerical simulations has no obvious effect on the friction factor.  相似文献   

基于MISR多角度光学遥感影像的海面风速估算实验          下载免费PDF全文

王艺霖  王晓林  张华国 《海洋学研究》2018,36(2):19-26

太阳耀光是来自粗糙海面的直接太阳反射光,其强度与海面粗糙度密切相关,而海面粗糙度主要受海面风场影响。因此,包含太阳耀光信息的光学遥感影像在海洋动力过程和海面风速探测中具有积极意义。本文利用2016年2月到2017年3月期间成像的25幅Terra卫星MISR(Multi-angle Imaging Spectro Radiometer)传感器的多角度遥感影像,分别提取了太阳的高度角和方位角、正视和后视影像的卫星观测角、方位角等信息,校正获得正视和后视影像的太阳耀光辐射强度,进一步反演海表面粗糙度信息,进而计算海面风速。最后利用ECMWF(European Centre for Medium-Range Weather Forecasts)的模式风速数据与反演获得的风速结果进行对比验证。结果表明,两者的相关系数较高(R=0.745),均方根误差和平均绝对偏差值分别为1.514 m·s^-1和1.319 m·s^-1。初步实验结果表明,利用MISR多角度光学遥感影像估算海表面风速是可行性的。  相似文献   

地表组合粗糙度不确定性引起的SAR反演土壤水分的不确定性分析     

陈鲁皖  韩玲  王文娟  秦小宝 《地球信息科学学报》2018,20(1):108-118

地表粗糙度的不确定性是引起SAR土壤水分反演结果不确定性的主要因素,现有研究大多着重于研究单个粗糙度参数（主要是相关长度）的不确定性,直接研究地表组合粗糙度不确定性的较少。本文使用偏度、峰度和四分位距3个指标来量化不确定性,通过在组合粗糙度中加入不同量级高斯噪声进行随机扰动的方法,研究组合粗糙度不确定性在反演过程中的传递,并对反演土壤水分的不确定性进行定量分析。进一步研究反演土壤水分的均方根误差对组合粗糙度不同比例误差范围的响应特征,得到满足反演精度要求的组合粗糙度误差控制范围。样区的实验分析结果表明：组合粗糙度高斯噪声标准差在0-0.045之间时,峰度取值从-0.1984到1.2501,偏度取值从0.0191到0.6791,四分位距取值从0.0018到0.0167,3个量化指标都随组合粗糙度高斯噪声量级的增大而增大,土壤水分反演值有集中在众数附近的趋势,土壤水分低估倾向比高估倾向更明显;本文提出的组合粗糙度误差控制范围可满足反演精度要求,误差控制范围与入射角负相关。  相似文献   

机载LiDAR地形特征信息快速提取     

刘智敏  杨安秀  宿殿鹏  刘盼 《大地测量与地球动力学》2018,38(11):1186-1190

为更有效地获取地形特征信息,提出一种机载LiDAR地形特征信息快速提取算法。首先,通过构建二次曲面拟合模型,建立实测LiDAR地形数据与拟合曲面的几何规则;然后,采用LM算法迭代参数寻优,获得最优化结果下的地形拟合参数,计算拟合时间及拟合精度;最后,以地形拟合模型为基础,进行地形特征信息的快速提取。通过机载LiDAR实测数据验证,当最优搜索半径为2 m时,地形曲面的拟合时间仅为0.02 s,RMSE仅为5.09 cm。该算法保证了地形特征信息提取效率和精度,能够有效满足机载LiDAR科学研究和工程应用的技术需求。  相似文献