2007年初一次雪后大雾天气过程分析   总被引：1，自引：1，他引：1  

曹治强  方翔  吴晓京  李小龙 《气象》2007,33(9):52-58

大雾天气是主要的灾害性天气之一。利用多种观测资料和NCEP再分析资料,分析了2007年1月15日华北和黄淮地区的雪后大雾天气产生的天气背景及其形成的温湿条件和层结特征。结果表明:在这次大雾天气发生时,亚欧大陆中高纬度的环流形势为两槽一脊型,中纬度无明显冷空气活动,南支气流较为平直,天气形势比较稳定。华北和黄淮地区位于入海高压的后部,近地面层有弱的东北风或偏东风,即有利于海洋上暖湿气流的平流输送,又不至于破坏大雾形成的温湿条件。同时,大气层结是绝对稳定的,低层有深厚的逆温层,当暖湿空气平流到温度较低的下垫面上时冷却而形成雾,因而这次大雾天气属于典型的平流雾。这种形势的稳定维持,造成了这次持续时间较长的大范围的大雾天气。另外,华北和黄淮较低的海拔高度,有利于暖湿空气的平流进入,也是大雾形成的重要因子。  相似文献   

Estimation of Sensible Heat Flux from Surface Temperature Wave and One-Time-of-Day Air Temperature Observation     

K. Blümel 《Boundary-Layer Meteorology》1998,86(2):193-232

By means of the algorithm presented here, the temporal course H(t) and the daily mean H¯ of the sensible heat flux H can be estimated from measurements of the thermodynamic surface temperature (as a function of time) and from a one-time-of-day air temperature observation. In addition to these temperatures, one needs estimates for daily mean wind speed, for the roughness lengths of momentum and heat transfer, and for the displacement height. First, a quite general solution of the equation for heat conductance (equation for the vertical profile of potential temperature (z,t)) in the dynamic sublayer will be presented. The undetermined parameters in this solution will be defined with the aid of the above mentioned measurements. The influence of horizontal advection will be taken into account. After that, the sensible heat flux can be evaluated from the temperature difference between surface and air with the well known resistance formulae. In this paper the algorithm is derived for areas with homogeneous surfaces, i.e., with uniform surface temperatures. Finally, the method will be verified by measurements taken during the field campaigns HIBE 89 (Hildesheimer Börde in Germany) and EFEDA 91 (Spain). The root mean square errors (RMSE) for the comparison between measurement and model with regard to the temperature difference of surface and air amount to one or two degrees Kelvin, and the error of H¯ reaches 10 to 25 per cent. The method can be used to determine the sensible heat flux from measurements of surface temperatures by satellites (e.g., METEOSAT), but can also be applied to ground based measurements. For instance, horizontal temperature advection can be estimated from measurements at a single location, especially if more than one near-surface air temperature is available. The procedure can be generalized for larger areas, which consist of various surface types with different surface temperatures. This generalization of the algorithm is in progress and will be addressed in a subsequent paper. It will allow us to improve the estimates for H(t) by means of temperature measurements from, e.g., NOAA/AVHRR or LANDSAT/TM, taking into account the heterogeneity of the area that is contained in one METEOSAT pixel.  相似文献   

2007年红河州一次典型两高辐合区强降水过程分析     

周秀美  兰兰  侬耀辉 《云南地理环境研究》2007,(Z1)

2007年7月,红河州多受两高间辐合区影响,产生强降水,选取7月18～20日强降水过程进行分析,得出:单纯的两高辐合区并不一定能产生强降水。虽然此次过程中有深厚的西南涡从四川东南移,但强降水的触发机制并不是西南涡,而是高空冷平流,且高空冷平流具有高层强、低层弱的特点。水汽、能量条件表现出在高层随着环流背景场南移、中低层少变的特点,较强的上升运动也集中在对流层中上层。MM5对于此次过程较强降水发生的时间、区域有较好的预报能力,但降水量级偏小。  相似文献   

Application of an improved semi-Lagrangian procedure to fully-nonlinear simulation of sloshing in non-wall-sided tanks     

《Applied Ocean Research》2015

The semi-Lagrangian procedure is widely used for updating the fully-nonlinear free surface in the time domain. However, this procedure is only available to cases when the body surface is vertical near the waterline. Present study introduces an improved semi-Lagrangian procedure which removes this ‘vertical-wall’ limitation. Coupling with the boundary element method, the improved semi-Lagrangian procedure is applied to the simulation of fully-nonlinear sloshing waves in non-wall-sided tanks. From the result comparison with the open source CFD software OpenFOAM, it is confirmed that this numerical scheme could guarantee a sufficient accuracy. Further series studies on 2D and 3D fully-nonlinear sloshing waves in wedged tanks are performed. Featured phenomena are observed which are distinct from those in wall-sided tanks.  相似文献   

伴随对流层中低层气温持续下降的雪转雨过程分析   总被引：2，自引：0，他引：2  

李海军  张雪慧  潘士雄 《气象科技》2015,43(6):1164-1169

利用欧洲中期天气预报中心（ECMWF）0.25°×0.25°分辨率细网格模式产品、探空观测资料和风廓线雷达等资料,对2014年2月18日浙江嘉兴雨雪天气过程中降水相态先由雨转雪、再由雪转雨的变化条件进行了分析,并对ECMWF细网格模式产品进行了预报性能检验,结果表明：模式形势预报准确,但未能预报出雪转雨过程。在对流层中低层气温持续降低的情况下,水汽凝结高度不同是造成两次相态转换的主要原因。上午垂直运动加强,水汽充沛,降水粒子的凝结高度高,足以形成大的雪花,在较低的零度层高度以下降落时不至于融化;下午垂直运动减弱,水汽集中在低层,尽管这一高度层的气温在-3～-2 ℃,但是不足以凝结成固态降水,同时地面气温受海上暖平流影响而回升,因此降水相态由雪转雨。  相似文献   

Beach tar accumulation, transport mechanisms, and sources of variability at Coal Oil Point, California     

Del Sontro TS  Leifer I  Luyendyk BP  Broitman BR 《Marine pollution bulletin》2007,54(9):1461-1471

A new field method for tar quantification was used at Coal Oil Point (COP), California to study the mechanisms transporting oil/tar from the nearby COP natural marine hydrocarbon seep field. This method segregates tar pieces into six size classes and assigns them an average mass based on laboratory or direct field measurements. Tar accumulation on the 19,927m(2) survey area was well resolved spatially by recording tar mass along twelve transects segmented into 4-m(2) blocks and then integrating over the survey area. A seasonal trend was apparent in total tar in which summer accumulations were an order of magnitude higher than winter accumulations. Based on multiple regression analyses between environmental data and tar accumulation, 34% of tar variability is explained by a combination of onshore advection via wind and low swell height inhibiting slick dispersion.  相似文献   

Improvement of the semi-Lagrangian advection scheme in the GRAPES model: Theoretical analysis and idealized tests   总被引：2，自引：0，他引：2  

HUANG Bo  CHEN Dehui  LI Xingliang  LI Chao 《大气科学进展》2014,31(3):693-704

ABSTRACT The Global/Regional Assimilation and PrEdiction System （GRAPES） is the newgeneration numerical weather predic- tion （NWP） system developed by the China Meteorological Administration. It is a fully compressible non-hydrostatical global/regional unified model that uses a traditional semi-Lagrangian advection scheme with cubic Lagrangian interpola tion （referred to as the SL_CL scheme）. The SL_CL scheme has been used in many operational NWP models, but there are still some deficiencies, such as the damping effects due to the interpolation and the relatively low accuracy. Based on Reich＇s semi-Lagrangian advection scheme （referred to as the R2007 scheme）, the Re_R2007 scheme that uses the low- and high-order B-spline function for interpolation at the departure point, is developed in this paper. One- and two-dimensional idealized tests in the rectangular coordinate system with uniform grid cells were conducted to compare the Re..R2007 scheme and the SL_CL scheme. The numerical results showed that： （1） the damping effects were remarkably reduced with the Re_R2007 scheme; and （2） the normalized errors of the Re_R2007 scheme were about 7.5 and 3 times smaller than those of the SL_CL scheme in one- and two-dimensional tests, respectively, indicating the higher accuracy of the Re..R2007 scheme. Furthermore, two solid-body rotation tests were conducted in the latitude-longitude spherical coordinate system with non uniform grid cells, which also verified the Re_R2007 scheme＇s advantages. Finally, in comparison with other global advection schemes, the Re_R2007 scheme was competitive in terms of accuracy and flow independence. An encouraging possibility for the application of the Re_R2007 scheme to the GRAPES model is provided.  相似文献   

Calibration and use of continuous heat-type automated seepage meters for submarine groundwater discharge measurements     

B.M. Mwashote  W.C. Burnett  J. Chanton  I.R. Santos  N. Dimova  P.W. Swarzenski 《Estuarine, Coastal and Shelf Science》2010

Submarine groundwater discharge (SGD) assessments were conducted both in the laboratory and at a field site in the northeastern Gulf of Mexico, using a continuous heat-type automated seepage meter (seepmeter). The functioning of the seepmeter is based on measurements of a temperature gradient in the water between downstream and upstream positions in its flow pipe. The device has the potential of providing long-term, high-resolution measurements of SGD. Using a simple inexpensive laboratory set-up, we have shown that connecting an extension cable to the seepmeter has a negligible effect on its measuring capability. Similarly, the observed influence of very low temperature (≤3 °C) on seepmeter measurements can be accounted for by conducting calibrations at such temperatures prior to field deployments. Compared to manual volumetric measurements, calibration experiments showed that at higher water flow rates (>28 cm day⁻¹ or cm³ cm⁻² day⁻¹) an analog flowmeter overestimated flow rates by ≥7%. This was apparently due to flow resistance, turbulence and formation of air bubbles in the seepmeter water flow tubes. Salinity had no significant effect on the performance of the seepmeter. Calibration results from fresh water and sea water showed close agreement at a 95% confidence level significance between the data sets from the two media (R² = 0.98). Comparatively, the seepmeter SGD measurements provided data that are comparable to manually-operated seepage meters, the radon geochemical tracer approach, and an electromagnetic (EM) seepage meter.  相似文献   

Peat porewater chloride concentration profiles in the Everglades during wet/dry cycles from January 1996 to June 1998: field measurements and theoretical analysis     

Michael M. Reddy  Micaela B. Reddy  Kenneth L. Kipp  Aaron Burman  Paul Schuster  Peter S. Rawlik Jr. 《水文研究》2008,22(11):1713-1724

Water quality is a key aspect of the Everglades Restoration Project, the largest water reclamation and ecosystem management project proposed in the United States. Movement of nutrients and contaminants to and from Everglades peat porewater could have important consequences for Everglades water quality and ecosystem restoration activities. In a study of Everglades porewater, we observed complex, seasonally variable peat porewater chloride concentration profiles at several locations. Analyses and interpretation of these changing peat porewater chloride concentration profiles identifies processes controlling conservative solute movement at the peat–surface water interface, that is, solutes whose transport is minimally affected by chemical and biological reactions. We examine, with an advection–diffusion model, how alternating wet and dry climatic conditions in the Florida Everglades mediate movement of chloride between peat porewater and marsh surface water. Changing surface water–chloride concentrations alter gradients at the interface between peat and overlying water and hence alter chloride flux across that interface. Surface water chloride concentrations at two frequently monitored sites vary with marsh water depth, and a transfer function was developed to describe daily marsh surface water chloride concentration as a function of marsh water depth. Model results demonstrate that porewater chloride concentrations are driven by changing surface water chloride concentrations, and a sensitivity analysis suggests that inclusion of advective transport in the model improves the agreement between the calculated and the observed chloride concentration profiles. Published in 2007 by John Wiley & Sons, Ltd.  相似文献   

两步保形平流方案在高分辨率球面经纬网格下的跳点差分试验   总被引：1，自引：0，他引：1  

张祎  宇如聪  李建  陈昊明 《气象学报》2013,71(6):1089-1102

尝试用一个基于有限差分的两步保形平流方案（TSPAS）替代美国国家大气研究中心第5版公用大气模式（NCAR-CAM5）欧拉-谱动力框架中的半拉格朗日传输（SLT）平流方案,并针对不同分辨率版本,计算水汽等物质的传输过程。通过设计保证守恒性的跳点差分法,解决了基于经纬网格的模式在高分辨率下由于极区纬向格距过小而造成的差分方案积分时间步长过短的问题,使得TSPAS在高分辨率下仍然可以使用较大的时间步长。理想试验表明：（1）跳点TSPAS在守恒性、数值精度（量级上）、保形性等方面均较好地保持了原TSPAS的特点,而积分步长可增大到与CAM5-SLT相同,比原TSPAS提高超过一个数量级;（2）较半拉格朗日传输方案,尽管TSPAS的耗散更大,但是在相同时间步长下更省时,且改进了半拉格朗日传输求解平流方程造成的不守恒问题。CAM5的比较试验表明：（1）采用跳点TSPAS的模式结果与非跳点计算结果相当,在高纬度跳点区域也并未出现模拟异常;（2）在高分辨率下,采用跳点TSPAS方案的CAM5模拟结果与原模式结果相近,并初步显示对东亚青藏高原南侧的虚假降水有所抑制。该工作确保了基于欧拉通量差分型的TSPAS在高分辨率模式下的大时间步长稳定积分,为解决有限差分方法在高分辨率模式发展中的相关计算问题提供了启示,为后续针对东亚地区的模式性能改进奠定了基础。  相似文献