Pressure sensitivity of olivine slip systems: first-principle calculations of generalised stacking faults     

J. Durinck  A. Legris  P. Cordier 《Physics and Chemistry of Minerals》2005,32(8-9):646-654

We have used a first-principle approach based on the calculation of generalised stacking faults (GSF) to study the influence of pressure on the mechanical properties of forsterite. Six cases corresponding to [100] glide over (010), (021) and (001), and [001] glide over (100), (010) and (110) have been considered. The relaxed energy barriers associated with plastic shear have been calculated by constraining the Si atoms to move perpendicular to the fault plane and allowing Mg and O atoms to move in every direction. These conditions, which preserve dilations as a relaxation process, introduce Si–O tetrahedral tilting as an additional relaxation mechanism. Relaxed GSF show little plastic anisotropy of [100] glide over different planes and confirms that [001] glide is intrinsically easier than [100] glide. The GSF are affected by the application of a 10 GPa confining pressure with a different response for each slip system that cannot be explained by sole elastic effect. In particular, [100](010) is found to harden significantly under pressure compared to [001](010). Our results give the first theoretical framework to understand the pressure-induced change of dominant slip systems observed by Couvy et al. (in Eur J Mineral 16(6):877–889, 2004) and P. Raterron et al. (in GRL, submitted). It appears necessary to account for the influence of pressure on the mechanical properties of silicates in the context of the deep Earth.  相似文献   

9: Processes of tectonism, magmatism and mineralization: Lessons from Europe     

Derek Blundell  Nicholas Arndt  Peter R. Cobbold  Christoph Heinrich 《Ore Geology Reviews》2005,27(1-4):333

Metallogenic provinces in Europe range in age from the Archaean to the Neogene. Deposit types include porphyry copper and epithermal Cu–Au, volcanic-hosted massive sulphide (VMS), orogenic gold, Fe-oxide–Cu–Au, anorthosite Fe–Ti-oxide and sediment-hosted base-metal deposits. Most of them formed during short-lived magmatic events in a wide range of tectonic settings; many can be related to specific tectonic processes such as subduction, hinge retreat, accretion of island arcs, continental collision, lithosphere delamination or slab tear. In contrast, most sediment-hosted deposits in Europe evolved in extensional, continental settings over significant periods of time. In Europe, as elsewhere, ore formation is an integral part of the geodynamic evolution of the Earth's crust and mantle. Many tectonic settings create conditions conducive to the generation of water-rich magma, but the generation of ore deposits appears to be restricted to locations and short periods of change in temperature and stress, imposed by transitory plate motions. Crustal influence is evident in the strong structural controls on the location and morphology of many ore deposits in Europe. Crustal-scale fault–fracture systems, many involving strike-slip elements, have provided the fabric for major plumbing systems. Rapid uplift, as in metamorphic core complexes, and hydraulic fracturing can generate or focus magmatic–hydrothermal fluid flow that may be active for time spans significantly less than a million years. Once a hydrologically stable flow is established, ore formation is strongly dependent on the steep temperature and pressure gradients experienced by the fluid, particularly within the upper crust. In Europe, significant fracture porosity deep in the crystalline basement (1%) is not only important for magmatic–hydrothermal systems, but allows brines to circulate down through sedimentary basins and then episodically upward, expelled seismically to produce sediment-hosted base-metal deposits and Kupferschiefer copper deposits. Emerging research, stimulated by GEODE, can improve the predicting power of numerical simulations of ore-forming processes and help discover the presence of orebodies beneath barren overburden.  相似文献   

Numerical simulation of percussive drilling          下载免费PDF全文

Alexandre Depouhon  Vincent Denoël  Emmanuel Detournay 《国际地质力学数值与分析法杂志》2015,39(8):889-912

This paper presents a novel dynamical model to analyze the long‐term response of a percussive drilling system. This departs from existing approaches that usually consider a single activation and bit/rock interaction cycle for the analysis of the process performance. The proposed model integrates the axial dynamics of an elastic piston and an elastic drill bit, a motion‐dependent pressure law to drive the piston, and a generalized bit/rock interaction law representative of the dynamic indentation taking place at the bit/rock interface. It applies to down‐the‐hole percussive drilling as well as top‐hole, with minor modifications. The model does not account for the angular motion or the hole cleaning, however. The model is first formulated mathematically; then, a finite‐dimensional approximation is proposed for computations. Numerical analyses of the model response, for a low‐size down‐the‐hole percussive system, follow. The period‐1 stationary response for the reference configuration is studied in detail, and parametric analyses assessing the influence on the rate of penetration of the bit/rock interaction parameters, the feed force, and the percussive activation parameters are conducted. These analyses reveal that the multiscale nature of the process is well captured by the model and recover expected trends for the influence of the parameters. They also suggest that a significant increase of the penetration rate can be achieved by increasing the percussive frequency. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Integration of aquifer geology,groundwater flow and arsenic distribution in deltaic aquifers – A unifying concept          下载免费PDF全文

Mohammad A. Hoque  William G. Burgess  Kazi M. Ahmed 《水文研究》2017,31(11):2095-2109

Groundwater arsenic (As) presents a public health risk of great magnitude in densely populated Asian delta regions, most acutely in the Bengal Basin (West Bengal, India and Bangladesh). Research has focused on the sources, mobilisation, and heterogeneity of groundwater As, but a consistent explanation of As distribution from local to basin scale remains elusive. We show for the Bengal Aquifer System that the numerous, discontinuous silt‐clay layers together with surface topography impose a hierarchical pattern of groundwater flow, which constrains As penetration into the aquifer and controls its redistribution towards discharge zones, where it is re‐sequestered to solid phases. This is particularly so for the discrete periods of As release to groundwater in the shallow subsurface associated with sea level high‐stand conditions of Quaternary inter‐glacial periods. We propose a hypothesis concerning groundwater flow ( S ilt‐clay layers I mpose H ierarchical groundwater flow patterns constraining A rsenic progression [SIHA]), which links consensus views on the As source and history of sedimentation in the basin to the variety of spatial and depth distributions of groundwater As reported in the literature. SIHA reconciles apparent inconsistencies between independent, in some cases contrasting, field observations. We infer that lithological and topographic controls on groundwater flow, inherent to SIHA, apply more generally to deltaic aquifers elsewhere. The analysis suggests that groundwater As may persist in the aquifers of Asian deltas over thousands of years, but in certain regions, particularly at deeper levels, As will not exceed low background concentrations unless groundwater flow systems are short‐circuited by excessive pumping.  相似文献   

Analytical solutions for advective–dispersive solute transport in double‐layered finite porous media     

Peter John Cleall 《国际地质力学数值与分析法杂志》2011,35(4):438-460

Analytical solutions for advection and dispersion of a conservative solute in a one‐dimensional double‐layered finite porous media are presented. The solutions are applicable to five scenarios that have various combinations of fixed concentration, fixed flux and zero concentration gradient conditions at the inlet and outlet boundaries that provide a wide number of options. Arbitrary initial solute concentration distributions throughout the media can be considered via explicit formulations or numerical integration. The analytical solutions presented have been verified against numerical solutions from a finite‐element‐based approach and an existing closed‐form solution for double‐layered media with an excellent correlation being found in both cases. A practical application pertaining to advective transport induced by consolidation of underlying sediment layers on contaminant movement within a capped contaminated sediment system is presented. Comparison of the calculated concentrations and fluxes with alternative approaches clearly illustrates the need to consider advection processes. Consideration of the different features of contaminant transport due to varying pore‐water velocity fields in primary consolidation and secondary consolidation stages is achieved via the use of non‐uniform initial concentration distributions within the proposed analytical solutions. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

车载移动测量系统应用于城市大比例尺地形图更新     

田茂义  俞家勇  谢欣鹏  李鹏飞  周茂伦 《测绘与空间地理信息》2016,(6):5-7

将车载移动测量系统与城市大比例尺数字地形图测图相结合,成功地将车载移动测量系统运用于城市大比例尺测图更新应用中。通过在测区内布设靶标控制点,对比靶标的点云量算坐标与全站仪实测实际坐标,统计分析车载移动测量系统的测图精度。实验结果表明,车载移动测量系统能够满足城市大比例尺地形图测图要求。  相似文献   

Reconstructing fluvial bar surfaces from compound cross‐strata and the interpretation of bar accretion direction in large river deposits          下载免费PDF全文

Renato P. Almeida  Bernardo T. Freitas  Bruno B. Turra  Felipe T. Figueiredo  André Marconato  Liliane Janikian 《Sedimentology》2016,63(3):609-628

The interpretation of fluvial styles from the rock record is based for a significant part on the identification of different types of fluvial bars, characterized by the geometric relationship between structures indicative of palaeocurrent and surfaces interpreted as indicative of bar form and bar accretion direction. These surfaces of bar accretion are the boundaries of flood‐related bar increment elements, which are typically less abundant in outcrops than what would be desirable, particularly in large river deposits in which each flood mobilizes large volumes of sediment, causing flood‐increment boundary surfaces to be widely spaced. Cross‐strata set boundaries, on the other hand, are abundant and indirectly reflect the process of unit bar accretion, inclined due to the combined effect of the unit bar surface inclination and the individual bedform climbing angle, in turn controlled by changes in flow structure caused by local bar‐scale morphology. This work presents a new method to deduce the geometry of unit bar surfaces from measured pairs of cross‐strata and cross‐strata set boundaries. The method can be used in the absence of abundant flood‐increment bounding surfaces; the study of real cases shows that, for both downstream and laterally accreting bars, the reconstructed planes are very similar to measured bar increment surfaces.  相似文献   

Re-conceptualizing the Anthropocene: A call for collaboration     

《Global Environmental Change》2016

Since it was first proposed in 2000, the concept of the Anthropocene has evolved in breadth and diversely. The concept encapsulates the new and unprecedented planetary-scale changes resulting from societal transformations and has brought to the fore the social drivers of global change. The concept has revealed tensions between generalized interpretations of humanity’s contribution to global change, and interpretations that are historically, politically and culturally situated. It motivates deep ethical questions about the politics and economics of global change, including diverse interpretations of past causes and future possibilities. As such, more than other concepts, the Anthropocene concept has brought front-and-center epistemological divides between and within the natural and social sciences, and the humanities. It has also brought new opportunities for collaboration. Here we explore the potential and challenges of the concept to encourage integrative understandings of global change and sustainability. Based on bibliometric analysis and literature review, we discuss the now wide acceptance of the term, its interpretive flexibility, the emerging narratives as well as the debates the concept has inspired. We argue that without truly collaborative and integrative research, many of the critical exchanges around the concept are likely to perpetuate fragmented research agendas and to reinforce disciplinary boundaries. This means appreciating the strengths and limitations of different knowledge domains, approaches and perspectives, with the concept of the Anthropocene serving as a bridge, which we encourage researchers and others to cross. This calls for institutional arrangements that facilitate collaborative research, training, and action, yet also depends on more robust and sustained funding for such activities. To illustrate, we briefly discuss three overarching global change problems where novel types of collaborative research could make a difference: (1) Emergent properties of socioecological systems; (2) Urbanization and resource nexus; and (3) Systemic risks and tipping points. Creative tensions around the Anthropocene concept can help the research community to move toward new conceptual syntheses and integrative action-oriented approaches that are needed to producing useful knowledge commensurable with the challenges of global change and sustainability.  相似文献   

气象预警信息一键式发布系统研究与应用     

张亚  江春  陈浩  袁兴德  罗希昌 《气象科技》2016,44(1):41-46

基于WebGIS、HTTP通信、数据库等技术,制定了一键式预警信息发布规范,有效整合了电子显示屏、预警大喇叭、手机等预警发布终端,开发了气象预警信息一键式发布平台,实现了地图综合显示、气象数据叠加、任意预警区域选取、一键式发布预警信息等功能,提高了预警信息发布的可视化水平,保证了多终端预警信息发布的高效性、一致性。该系统的一键式信息发布技术,为气象预警发布开拓了新思路,能够有效提升业务水平和预警发布能力。  相似文献   

A hybrid approach to modeling territorial control in violent armed conflicts          下载免费PDF全文

Ran Tao  Daniel Strandow  Michael Findley  Jean‐Claude Thill  James Walsh 《Transactions in GIS》2016,20(3):413-425

Territorial control is central to the understanding of violent armed conflicts, yet reliable and valid measures of this concept do not exist. We argue that geospatial analysis provides an important perspective to measure the concept. In particular, measuring territorial control can be seen as an application of calculating service areas around points of control. The modeling challenge is acute for areas with limited road infrastructure, where no complete network is available to perform the analysis, and movements largely occur off road. We present a new geospatial approach that applies network analysis on a hybrid transportation network with both actual road data and hexagon‐fishnet‐based artificial road data representing on‐road and off‐road movements, respectively. Movement speed or restriction can be readily adjusted using various input data. Simulating off‐road movement with hexagon‐fishnet‐based artificial road data has a number of advantages including scalability to small or large study areas and flexibility to allow all‐directional travel. We apply this method to measuring territorial control of armed groups in Sub‐Saharan Africa where inferior transport infrastructure is the norm. Based on the Uppsala Conflict Data Program's (UCDP) Georeferenced Event Data (GED) as well as spatial data on terrain, population locations, and limited transportation networks, we enhance the delineation of the specific areas directly controlled by each warring party during civil wars within a given travel time.  相似文献