盐城市地下水水质控制因素分析     

卞锦宇  方瑞 《水文地质工程地质》2003,30(5):56-60

本文采用主因素分析的方法,结合盐城市近几年地下水水质监测资料,对盐城市淡水区和微咸水区地下水水质各监测组分按不同的分类标准分成全体组和离子组进行分析,确定地下水水质控制因素,并将计算结果与盐城市水文地质条件相结合,分析了计算得出的研究区地下水水质控制因素的形成原因及特点。最后根据分析结果制定一套适用于盐城市第Ⅲ承压含水层水质监测方案。为提高治理水环境的综合效益提供了科学依据。  相似文献   

京珠高速公路小塘至甘塘段煤系地层路堑高边坡稳定性分析与防治   总被引：6，自引：0，他引：6  

李吉东 《水文地质工程地质》2003,30(5):86-88

京珠高速公路粤境小塘至甘塘段20m以上高度的煤系地层路堑边坡共计11处。岩层以全—强风化层为主,厚度20～40m,其物理力学性质大大降低,边坡可能发生平面破坏和圆弧破坏等2种破坏模式。部分地下水水质中SO2-4含量大于200mg l,具有强烈的硫酸盐侵蚀性。边坡防治对策应在详细勘察工程地质、水文地质的基础上,合理选用设置山坡截水沟、平台截水沟、泄水洞、边坡渗沟、排水仰孔等防、排水措施,减少地表水渗入坡体,疏干边坡表层地下水。  相似文献   

基于预测控制的结构振动半主动控制研究   总被引：6，自引：0，他引：6  

徐建功  王肇民  何玉敖 《世界地震工程》2003,19(2):126-131

建立了半主动控制系统的理论模型，分析了半主动控制机理，并结合现代控制理论，将预测控制应用于结构半主动控制中，提出了在线预测控制算法，建立了预测模型，并成功的解决了时滞问题，最后作了计算机仿真分析，证明该系统有较好的控制效果。将预测控制思想应用于结构半主动控制中，为结构控制注入了新的思路，通过研究及仿真分析也说明了这种思想是可行的并且具有很大的发展前途。  相似文献   

新型组合连梁控制结构体系   总被引：9，自引：0，他引：9  

邓志恒  潘峰  陶晓光  唐光暹 《世界地震工程》2003,19(3):6-11

分析了连梁在水平力作用下的破坏机制，对连梁结构体系的发展及结构抗震控制进行了评述，在此基础上提出一种新型组合连梁控制结构体系，并对其进行了概念分析，提出了有待研究的若干关键问题。  相似文献   

Earthen barriers to control lava flows in the 2001 eruption of Mt. Etna     

F. Barberi  F. Brondi  M. L. Carapezza  L. Cavarra  C. Murgia 《Journal of Volcanology and Geothermal Research》2003,123(1-2):231

Preceded by four days of intense seismicity and marked ground deformation, a new eruption of Mt. Etna started on 17 July and lasted until 9 August 2001. It produced lava emission and strombolian and phreatomagmatic activity from four different main vents located on a complex fracture system extending from the southeast summit cone for about 4.5 km southwards, from 3000 to 2100 m elevation (a.s.l.). The lava emitted from the lowest vent cut up an important road on the volcano and destroyed other rural roads and a few isolated country houses. Its front descended southwards to about 4 km distance from the villages of Nicolosi and Belpasso. A plan of intervention, including diversion and retaining barriers and possibly lava flow interruption, was prepared but not activated because the flow front stopped as a consequence of a decrease in the effusion rate. Extensive interventions were carried out in order to protect some important tourist facilities of the Sapienza and Mts. Silvestri zones (1900 m elevation) from being destroyed by the lava emitted from vents located at 2700 m and 2550 m elevation. Thirteen earthen barriers (with a maximum length of 370 m, height of 10–12 m, base width of 15 m and volume of 25 000 m³) were built to divert the lava flow away from the facilities towards a path implying considerably less damage. Most of the barriers were oriented diagonally (110–135°) to the direction of the flow. They were made of loose material excavated nearby and worked very nicely, resisting the thrust of the lava without any difficulty. After the interventions carried out on Mt. Etna in 1983 and in 1991–1992, those of 2001 confirm that earthen barriers can be very effective in controlling lava flows.  相似文献   

Optimum multiple tuned mass dampers for structures under the ground acceleration based on the uniform distribution of system parameters     

Chunxiang Li  Yanxia Liu 《地震工程与结构动力学》2003,32(5):671-690

The five MTMD models, with natural frequencies being uniformly distributed around their mean frequency, have been recently presented by the first author. They are shown to have the near‐zero optimum average damping ratio (more precisely, for a given mass ratio there is an upper limit on the total number, beyond which the near‐zero optimum average damping ratio occurs). In this paper, the eight new MTMD models (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1～US‐MTMD3, UD‐MTMD1 and UD‐MTMD2), with the system parameters (mass, stiffness and damping coefficient) being, respectively, uniformly distributed around their average values, have been, for the first time here, proposed to seek for the MTMD models without the near‐zero optimum average damping ratio. The structure is represented by the mode‐generalized system corresponding to the specific vibration mode that needs to be controlled. Through minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure with the eight MTMD models (i.e. through the implementation of Min.Min.Max.DMF), the optimum parameters and values of Min.Min.Max.DMF for these eight MTMD models are investigated to evaluate and compare their control performance. The optimum parameters include the optimum mass spacing, stiffness spacing, damping coefficient spacing, frequency spacing, average damping ratio and tuning frequency ratio. The six MTMD models without the near‐zero optimum average damping ratio (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1, US‐MTMD2 and UD‐MTMD2) are found through extensive numerical analyses. Likewise, the optimum UM‐MTMD3 offers the higher effectiveness and robustness and requires the smaller damping with respect to the rest of the MTMD models in reducing the responses of structures subjected to earthquakes. Additionally, it is interesting to note, by comparing the optimum UM‐MTMD3 with the optimum MTMD‐1 recently investigated by the first author, that the effectiveness and robustness for the optimum UM‐MTMD3 is almost identical to that for the optimum MTMD‐1 (without inclusion of the optimum MTMD‐1 with the near‐zero optimum average damping ratio). Recognizing these performance benefits, it is preferable to employ the optimum UM‐MTMD3 or the optimum MTMD‐1 without the near‐zero optimum average damping ratio, when installing the MTMD for the suppression of undesirable oscillations of structures under earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Steel frames with bracing mechanism and hysteretic dampers     

M. C. Phocas  A. Pocanschi 《地震工程与结构动力学》2003,32(5):811-825

A new earthquake resistant structural system for multi‐storey frame structures, based on a dual function of its bracing components, is developed. This consists of a hysteretic damper device and a cross‐bracing mechanism with a kinetic closed circuit, working only in tension, so that cable members can be used for this purpose. Solutions are presented regarding the connections' design of three types of structural frame system, that are concerned throughout the study: braced moment free frame, braced moment resisting frame with moment free supports, and with moment resisting supports. The dynamic behaviour of the system is investigated on the basis of an SDOF model, and based on the response spectra method an approximate design approach of the controlled structures is shown. From the time history analysis of the structural systems for the El Centro earthquake the areas of appropriate stiffness relations of the frames to the hysteretic dampers and the cable braces are deduced, so that the energy dissipation of the system may be controlled by the damper‐cable bracing mechanism. Based on the results of these studies, a predesign approach is developed for the implementation of the control system in frame structures. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Statistical performance analysis of seismic‐excited structures with active interaction control     

Yunfeng Zhang  Wilfred D. Iwan 《地震工程与结构动力学》2003,32(7):1039-1054

This paper presents a statistical performance analysis of a semi‐active structural control system for suppressing the vibration response of building structures during strong seismic events. The proposed semi‐active mass damper device consists of a high‐frequency mass damper with large stiffness, and an actively controlled interaction element that connects the mass damper to the structure. Through actively modulating the operating states of the interaction elements according to pre‐specified control logic, vibrational energy in the structure is dissipated in the mass damper device and the vibration of the structure is thus suppressed. The control logic, categorized under active interaction control, is defined directly in physical space by minimizing the inter‐storey drift of the structure to the maximum extent. This semi‐active structural control approach has been shown to be effective in reducing the vibration response of building structures due to specific earthquake ground motions. To further evaluate the control performance, a Monte Carlo simulation of the seismic response of a three‐storey steel‐framed building model equipped with the proposed semi‐active mass damper device is performed based on a large ensemble of artificially generated earthquake ground motions. A procedure for generating code‐compatible artificial earthquake accelerograms is also briefly described. The results obtained clearly demonstrate the effectiveness of the proposed semi‐active mass damper device in controlling vibrations of building structures during large earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Predictive instantaneous optimal control of elastic structures during earthquakes     

Kevin K. F. Wong  Rong Yang 《地震工程与结构动力学》2003,32(14):2161-2177

A predictive instantaneous optimal control (PIOC) algorithm is proposed for controlling the seismic responses of elastic structures. This algorithm compensates for the time delay that happens in practical control applications by predicting the structural response over a period that equals the time delay, and by substituting the predicted response in the instantaneous optimal control (IOC) algorithm. The unique feature of this proposed PIOC algorithm is that it is simple and at the same time compensates for the time delay very effectively. Numerical examples of single degree of freedom structures are presented to compare the performance of PIOC and IOC systems for various time delay magnitudes. Results show that a time delay always causes degradation of control efficiency, but PIOC can greatly reduce this degradation compared to IOC. The effects of the structure's natural periods and the choice of control gains on the degradation induced by the time delay are also analyzed. Results show that shorter natural periods and larger control gains are both more sensitive and more serious to the degradation of control efficiency. Finally, a practical application of PIOC is performed on a six‐story moment‐resisting steel frame. It is demonstrated that PIOC contributes significantly to maintain stability in multiple degree of freedom structures, and at the same time PIOC has a satisfactory control performance. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Predictive instantaneous optimal control of inelastic structures during earthquakes     

Kevin K. F. Wong  Rong Yang 《地震工程与结构动力学》2003,32(14):2179-2195

A new inelastic structural control algorithm is proposed by incorporating the force analogy method (FAM) with the predictive instantaneous optimal control (PIOC) algorithm. While PIOC is very effective in compensating for the time delay for elastic structures, the FAM is highly efficient in performing the inelastic analysis. Unlike conventional inelastic analysis methods of changing stiffness, the FAM analyzes structures by varying the structural displacement field, and therefore the state transition matrix needs to be computed only once. This greatly simplifies the computation and makes inelastic analysis readily applicable to the PIOC algorithm. The proposed algorithm compensates for the time delay that happens in practical control systems by predicting the inelastic structural response over a period that equals the magnitude of the time delay. A one‐story frame with both strain‐hardening and strain‐softening inelastic characteristics is analyzed using this algorithm. Results show that the proposed control algorithm is feasibile for any inelastic structures. While the control efficiency deteriorates with the increase in magnitude of the time delay, the PIOC maintains acceptable performance within a wide range of time delay magnitudes. Finally, a computer model of a six‐story moment‐resisting steel frame is analyzed to show that PIOC has good control results for real inelastic structures. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献