On size and boundary effects in scaled model blasts spatial problems     

H. P. Rossmanith  K. Uenishi 《Fragblast: International Journal for Blasting and Fragmentation》2005,9(3):139-174

This paper addresses size and boundary effects on wave propagation, fracture pattern development and fragmentation in small scale laboratory-size specimens for model blasting. Small block type specimens are centre-line loaded by linear explosive charges and supersonically detonated. Using elastic wave propagation theory and fracture mechanics it is shown that the type of boundary conditions which prevail at the outer boundary of the cylinder control the extension of bore-hole cracking and fragmentation within the body of the cylinder. In the case of a composite block where a cylindrical core of different material is embedded, the level of fracturing and fragmentation is controlled by the separation of the interface which in turn depends on the relative dimensions of the core and the block. The most important parameter is the ratio between the length of the pulse (space-wise or time-wise) and the characteristic dimensions of the models, i.e. in this case the dimensions of the core and the mantel. Stress wave superposition effects occur in the corner sections of the mantel. Theoretical results are in good agreement with recent experimental findings.  相似文献   

Validating the ability of the discontinuous deformation analysis method to model normal P‐wave propagation across rock fractures          下载免费PDF全文

Wenjun Gong  Yunsheng Wang  Youjun Ning  Yonghong Luo  Yujie Wang 《国际地质力学数值与分析法杂志》2017,41(10):1267-1282

The effects of fractures on wave propagation problems are increasingly abstracting the attention of scholars and engineers in rock engineering field. This study aims to fully validate the ability of discontinuous deformation analysis (DDA) to model normal P‐wave propagation across rock fractures. The effects of a single fracture and multiple parallel fractures are all tested. The results indicate that DDA can accurately reflect the fracture effects, including the fractures stiffness, the fracture spacing and the fracture number, and the effects of incident wave frequency on one‐dimensional P‐wave propagation problems. Thus, DDA is able to deal well with normal incident P‐wave propagation problems. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Discrete element model for crack propagation in brittle materials          下载免费PDF全文

Ba Danh Le  Georg Koval  Cyrille Chazallon 《国际地质力学数值与分析法杂志》2016,40(4):583-595

We propose a discrete element model for brittle rupture. The material consists of a bidimensional set of closed‐packed particles in contact. We explore the isotropic elastic behavior of this regular structure to derive a rupture criterion compatible to continuum mechanics. We introduce a classical criterion of mixed mode crack propagation based on the value of the stress intensity factors, obtained by the analysis of two adjacent contacts near a crack tip. Hence, the toughness becomes a direct parameter of the model, without any calibration procedure. We verify the consistency of the formulation as well as its convergence by comparison with theoretical solutions of tensile cracks, a pre‐cracked beam, and an inclined crack under biaxial stress. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

南海东北部内潮的模态结构和传播     

刘倩  谢晓辉  尚晓东  陈桂英  汪宏 《海洋学报(英文版)》2019,38(9):12-23

The evolution of energy, energy flux and modal structure of the internal tides(ITs) in the northeastern South China Sea is examined using the measurements at two moorings along a cross-slope section from the deep continental slope to the shallow continental shelf. The energy of both diurnal and semidiurnal ITs clearly shows a～14-day spring-neap cycle, but their phases lag that of barotropic tides, indicating that ITs are not generated on the continental slope. Observations of internal tidal energy flux suggest that they may be generated at the Luzon Strait and propagate west-northwest to the continental slope in the northwestern SCS. Because the continental slope is critical-supercritical with respect to diurnal ITs, about 4.6 kJ/m~2 of the incident energy and 8.7 kW/m of energy flux of diurnal ITs are reduced from the continental slope to the continental shelf. In contrast, the semidiurnal internal tides enter the shelf because of the sub-critical topography with respect to semidiurnal ITs.From the continental slope to the shelf, the vertical structure of diurnal ITs shows significant variation, with dominant Mode 1 on the deep slope and dominant higher modes on the shelf. On the contrary, the vertical structure of the semidiurnal ITs is stable, with dominant Mode 1.  相似文献   

近岸海域大型水母来源与迁移路径分析——以红沿河电厂海域为例     

孙雪  魏皓  张海彦  王彦涛  张广跃  刘汉霖 《海洋与湖沼》2019,50(6):1281-1291

近岸海域水母暴发可导致滨海火/核电厂取水口堵塞,对电厂安全运行造成潜在威胁。寻找水母源地及其迁移路径是水母治理的基础。本文基于拉格朗日质点追踪方法(LTRANS)建立反向追踪模型,并结合水母生态学特性对2015年6—9月聚集在红沿河电厂海域的大型水母进行溯源,获得水母源地及迁移路径,可以为螅状体栖息地寻找和水母拦截打捞提供依据,对近岸海域水母灾害防治具有重要指导意义。溯源结果表明:(1)红沿河电厂及其邻近海域的水母可能来自多个不同源区,辽东湾西部、北部及电厂南北两侧等海域的水母均有可能迁移至电厂附近;(2)受水温和环流影响,6—9月期间到达电厂附近的水母主要源区及迁移路径不同,早期出现在电厂海域的水母很可能是局地产生的,而7—9月持续的高风险水母灾害则主要取决于渤海不同源区水母的物理聚集;(3)根据水母的主要迁移路径,建议在电厂取水口约15km的海域设置一条封闭监测断面,对水母进行实时监测;在距离取水口约30km的外侧海域设置一条调查断面,于7月初至8月中旬,每5天进行一次定点拖网调查。此外,在距离电厂取水口15—20km的西南方向上,对水母进行拦截打捞可大大降低水母入侵风险。  相似文献   

木本植被覆盖岸坡上波浪爬升过程的数值模拟研究   总被引：1，自引：1，他引：0  

徐海珏  胡萍  白玉川  杨波 《海洋学报》2020,42(3):10-24

近岸木本植物构成的生态缓冲带作为新型的海岸软防护结构，兼具功能性和生态友好性，在沿海工程建设中愈发受到关注，如何深入开展其防护效果的机理研究是目前亟待解决的问题。本文采用数值模拟方法，在N-S方程中分别考虑树枝和树干的拖曳力影响，提出了木本植被作用下波浪沿斜坡爬升的表面波衰减的连续介质等效模型，并采用MAC法来跟踪自由曲面上的水颗粒轨迹。本文以波浪沿1/30的斜坡爬升为算例，对比讨论了有无植被作用下波浪的传播过程，并将算例结果与以往试验结果规律进行对照，验证了数值模型的有效性。最后，分别讨论了植物枝干的高度、密度、树枝倾斜角度等植被特性和波浪因素对植被消浪效果的影响，得到植被消浪的基本规律。文中的计算结果也可为实际的护岸工程和生态景观设计提供参考。  相似文献   

Application of the numerical manifold method for stress wave propagation across rock masses     

G. F. Zhao  X. B. Zhao  J. B. Zhu 《国际地质力学数值与分析法杂志》2014,38(1):92-110

In this paper, the numerical manifold method (NMM) is extended to study wave propagation across rock masses. First, improvements to the system equations, contact treatment, and boundary conditions of the NMM are performed, where new system equations are derived based on the Newmark assumption of the space–time relationship, the edge‐to‐edge contact treatment is further developed for the NMM to handle stress wave propagation across discontinuities, and the viscous non‐reflection boundary condition is derived based on the energy minimisation principle. After the modification, numerical comparisons between the original and improved NMM are presented. The results show that the original system equations result in artificial numerical damping, which can be overcome by the Newmark system equations. Meanwhile, the original contact scheme suffers some calculation problems when modelling stress wave propagation across a discontinuity, which can be solved by the proposed edge‐to‐edge contact scheme. Subsequently, the influence of the mesh size and time step on the improved NMM for stress wave propagation is studied. Finally, 2D wave propagation is modelled, and the model's results are in good agreement with the analytical solution. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Cracking risk of partially saturated porous media—Part I: Microporoelasticity model     

Bernhard Pichler  Luc Dormieux 《国际地质力学数值与分析法杂志》2010,34(2):135-157

Drying of deformable porous media results in their shrinkage, and it may cause cracking provided that shrinkage deformations are hindered by kinematic constraints. This is the motivation to develop a thermodynamics‐based microporoelasticity model for the assessment of cracking risk in partially saturated porous geomaterials. The study refers to 3D representative volume elements of porous media, including a two‐scale double‐porosity material with a pore network comprising (at the mesoscale) 3D mesocracks in the form of oblate spheroids, and (at the microscale) spherical micropores of different sizes. Surface tensions prevailing in all interfaces between solid, liquid, and gaseous matters are taken into account. To establish a thermodynamics‐based crack propagation criterion for a two‐scale double‐porosity material, the potential energy of the solid is derived, accounting—in particular—for mesocrack geometry changes (main original contribution) and for effective micropore pressures, which depend (due to surface tensions) on the pore radius. Differentiating the potential energy with respect to crack density parameter yields the thermodynamical driving force for crack propagation, which is shown to be governed by an effective macrostrain. It is found that drying‐related stresses in partially saturated mesocracks reduce the cracking risk. The drying‐related effective underpressures in spherical micropores, in turn, result in a tensile eigenstress of the matrix in which the mesocracks are embedded. This way, micropores increase the mesocracking risk. Model application to the assessment of cracking risk during drying of argillite is the topic of the companion paper (Part II). Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Investigation of directional hydraulic fracturing based on true tri-axial experiment and finite element modeling     

《Computers and Geotechnics》2016

The initiation and propagation of directional hydraulic fracturing (DHF) was investigated based on true tri-axial experiment and finite element modeling. The influences of notch angle, notch length and injection rate on the DHF were investigated. The initiation and propagation of DHF was modeled by a 3D nonlinear finite element method. A comparison between experimental investigation and numerical modeling results indicates that there is a good correlation between unbalanced force (UF) and fracturing. UF can be used to predict the hydraulic fracture initiation and propagation.  相似文献   

江苏盐城地区一次持续雾-霾天气过程的综合分析   总被引：7，自引：3，他引：4  

周文君  平海波  刘端阳  魏建苏  韦莹莹  王群 《气象》2016,42(7):838-846

2013年12月上旬江苏盐城地区出现了一次历史罕见的持续重度雾-霾天气,利用盐城市常规气象观测资料、NCEP再分析资料(1°×1°)及环境监测中心站的污染物浓度资料等,对此次过程的环流背景、气象要素、大气层结特征以及动力条件、污染情况等进行了综合性分析。结果发现:12月上旬中高层冷空气势力弱,以纬向环流为主;低层弱的水平风场为雾-霾的发生发展提供了有利的环流背景;稳定的层结特征,近地面高强度的贴地逆温和持续较低的混合层高度是此次雾-霾天气长时间维持的重要因素;边界层内弱正散度及负涡度是此次雾-霾天气得以维持发展的动力因子;通过后向轨迹分型和火点监测资料分析发现:污染物的长距离输送在此次重污染天气的形成过程中起到了一定作用。最后,文中建立了能见度和PM_(2.5)浓度、相对湿度的非线性回归方程,对能见度的预报效果较好,为实际业务应用中雾-霾的预报提供了有利的依据。  相似文献