某双向混凝土立交桥顶推法施工控制测量     

马勇  李仲勤  梅泽 《测绘与空间地理信息》2016,(11):213-215

文中所选立交桥为双向三车道桥梁,单幅为3跨105 m的箱型连续梁,重量3 400 t,横跨铁路线。对于跨铁路的桥梁建设,顶推法施工可最大限度地减少对交通的影响。桥梁重量大,所须牵引力约280 t,施工过程中对桥墩及其他建筑物产生的变形较大,施工前模拟施工状态,设计控制测量监控的基本方案,利用控制测量方法,对施工状态实时监测,预测变形及偏位、纠偏,使施工状态最大限度地接近理想状态。顶推到位后,轴向偏位满足1 cm的限差,桥墩变形基本满足施工规范的要求,最终顺利完成顶推过程。  相似文献   

IEC的风机选型参数估算方法在中国的适用性研究     

黄林宏  宋丽莉  李刚  王丙兰  张永山 《气象》2016,42(12):1522-1530

国际电工委员会编制的《风力发电机组设计要求》(IEC 61400-1)推荐了针对风电机组安全等级评估的极端风速和湍流强度特征值估算方法,因其简单便捷,在风电领域被广泛采用。利用全国风能资源专业观测网的193座测风塔观测数据,对IEC推荐的极端风速计算方法与我国规范推荐的基于极值I型概率分布方法进行比较,发现两种方法计算的193座塔70 m高度层50年一遇10 min平均最大风速,仅有7座测风塔较为一致,差异在±1%;IEC推荐方法的计算结果多数偏小,其中偏小10%以上的测风塔有121座,偏小30%以上的有44座测风塔,而偏大10%以上的只有9座测风塔;IEC方法计算的极值风速大幅度偏小的测风塔主要分布在台风影响的东南沿海地区,偏差较小的测风塔主要分布在西北和华北地形平缓区域,但同时偏大10%以上的测风塔也多分布在这一地区。以目前行业领域普遍采用的以15 m·s~(-1)风速的平均湍流强度作为风电机组选型指标,与严格按照规范,以15 m·s~(-1)风速段所有样本湍流强度的90%分位数处的值作为指标进行风电机组等级确定作对比,发现193座塔中有46座塔的选型是不安全的,甚至相差两个等级。  相似文献   

新疆昌吉市主汛期降水日变化特征     

黄秋霞  方雯  王春燕  田喜凤 《沙漠与绿洲气象(新疆气象)》2016,10(6):19-23

基于昌吉市2008—2015年逐时自动降水资料,分析了主汛期(5—8月)降水日变化特征。结果表明,降水主要集中在夜间21:00至翌日03:00,最大值出现在02:00,最小值出现在14:00;逐时降水频次为明显的单峰型,降水易发生在21:00至翌日08:00,降水频次的高峰值出现在01:00,降水最不易产生于午后15:00至18:00;降水强度变化的波动性较大,大值区出现在21:00至翌日02:00和午后15:00至19:00,最高值出现在18:00,最低值出现在04:00至08:00;在≥0.1 mm、≥1 mm和≥3 mm的逐时降水频次中,夜间降水频次较白天高,≥0.1 mm的降水出现次数较多;降水主要以夜雨,且以短时间(1—4h)的降水为主,贡献率最大的是持续7h的降水,最小的为12h;总云量和低云量的变化与降水量成显著正相关关系。  相似文献   

中国地面气温统计降尺度预报方法研究   总被引：1，自引：1，他引：0       下载免费PDF全文

陈国华  郭品文 《大气科学学报》2016,39(4):569-575

利用中国752个基本、基准地面气象观测站2000—2010年地面温度日值数据,采用具有自适应特征的Kalman滤波类型的递减平均统计降尺度技术,对中国地面温度进行精细化预报研究。分析该方案的降尺度效果,并与常用插值降尺度方法进行比较。结果表明:1)递减平均统计降尺度技术相比插值方法有较大的提高,显著减小东西部预报效果差异,1~3 d预报的均方根误差减小了1.4℃;2)该方案1~3 d预报的均方根误差为1.5℃,预报误差从东南地区(均方根误差为1.4℃)向西北地区(均方根误差为1.8℃)逐渐增大,并且预报效果夏季优于冬季。因此,递减平均统计降尺度技术对中国地面温度进行精细化预报是可行的。  相似文献   

基于 CCD 方法的超高层建筑周日摆动监测研究     

兰泽英  刘洋 《测绘工程》2016,25(8)

对超高层建筑塔体进行周日摆动监测,为施工投点纠偏和选择合适投点时机提供科学依据,是施工控制网竖向传递的核心问题。文中针对现有方法在自动化采集及实时表达方面的不足,基于自适应阈值激光光斑中心定位方法,自主研发基于CCD的塔体摆动监测系统,并采用倾斜仪方法与之做同步比较研究。两种方法在广州市东塔施工第三方监测中互为检核验证,具有借鉴意义。  相似文献   

变形监测缺失数据序列灰色建模方法探讨     

周清  王奉伟 《测绘工程》2016,25(12):70-73

在测量工作中,由于气候环境、观测方法、观测仪器以及观测人员自身因素等多方面的原因,可能造成观测数据的丢失或者不完全。文中针对这类数据的处理,采用加权平均法和三次样条插值法对缺失数据进行修复,建立GM （1,1）模型,并与非等间隔预测模型进行对比。通过两组仿真数据和两组实测数据验证发现：对于呈指数增长的序列和高增长序列修复之后建模预测精度更高;三次样条插值法数据修复后GM （1,1）建模预测精度较加权平均法预测精度更高;对于低增长序列,直接采用非等间隔建模预测精度更高。  相似文献   

Quality control methods for KOOS operational sea surface temperature products     

YANG Chansu  KIM Sunhwa 《海洋学报(英文版)》2016,35(2):11-18

Sea surface temperature SST obtained from the initial version of the Korea Operational Oceanographic System(KOOS) SST satellite have low accuracy during summer and daytime. This is attributed to the diurnal warming effect. Error estimation of SST data must be carried out to use the real-time forecasting numerical model of the KOOS. This study suggests two quality control methods for the KOOS SST system. To minimize the diurnal warming effect, SSTs of areas where wind speed is higher than 5 m/s were used. Depending on the wind threshold value, KOOS SST data for August 2014 were reduced by 0.15°C. Errors in SST data are considered to be a combination of random, sampling, and bias errors. To estimate bias error, the standard deviation of bias between KOOS SSTs and climatology SSTs were used. KOOS SST data yielded an analysis error standard deviation value similar to OSTIA and NOAA NCDC(OISST) data. The KOOS SST shows lower random and sampling errors with increasing number of observations using six satellite datasets. In further studies, the proposed quality control methods for the KOOS SST system will be applied through more long-term case studies and comparisons with other SST systems.  相似文献   

Calculation method for thickness of discontinuous boundary layer of engineering pavement     

ZhongQiong Zhang  QingBai Wu  Peng Zhang  SiRu Gao 《寒旱区科学》2016,8(6):461-466

The boundary layer is a buffer layer of water and heat exchange between the atmosphere and permafrost.Based on the atmospheric boundary layer and heat transfer theory,we established a method for determining the boundary layer thickness of engineering pavement(asphalt and sand pavement)in permafrost region.The boundary layer can be divided into the Boundary Layer Above Surface(BLAS)and the Boundary Layer Below Surface(BLBS).From in-situ monitoring data,the thickness of BLAS was determined through the laminar thickness,and the thickness of BLBS was determined through ground temperature,the heat conduction function,and the mean attenuation function(α).For asphalt pavement,the BLAS thickness varied between 2.90 and 4.31 mm and that of BLBS varied between 28.00 and 45.38 cm.For sand pavement,the BLAS thickness varied between 2.55 and 3.29 mm and that of BLBS varied between 15.00 and 46.44 cm.The thickness varied with freezing and thawing processes.The boundary layer calculation method described in this paper can provide a relatively stable boundary for temperature field analysis.  相似文献   

A late Holocene winter monsoon record inferred from the palaeo-aeolian sand dune in the southeastern Mu Us Desert, northern China     

Bing Liu  HeLing Jin  Fan Yang 《寒旱区科学》2016,8(5):388-399

The variation of the Asian winter monsoonal strength has seriously affected the climate and environmental conditions in the Asian monsoonal region, and even in marginal islands and the ocean in the East Asian region. However, relevant understanding remains unclear due to the lack of suitable geological materials and effective proxies in the key study areas. Here, we present a grain-size record derived from the palaeo-aeolian sand dune in the southeastern Mu Us Desert, together with other proxies and OSL dating, which reflect a relatively detailed history of the winter monsoon and abrupt environmental events during the past 4.2 ka. Our grain-size standard deviation model indicated that >224 μm content can be considered as an indicator of the intensity of Asian winter monsoon, and it shows declined around 4.2-2.1 ka, enhanced but unstable in 2.1-0.9 ka, and obviously stronger since then. In addition, several typical climate events were also documented, forced by the periodic variation of winter monsoonal intensity. These include the cold intervals of 4.2, 2.8, 1.4 ka, and the Little Ice Age (LIA), and relatively warm sub-phases around 3.0, 2.1, 1.8 ka, and the Medieval Warm Period (MWP), which were roughly accordant with the records of the aeolian materials, peat, stalagmites, ice cores, and sea sediments in various latitudes of the Northern Hemisphere. Combined with the previous progresses of the Asian summer monsoon, we preliminarily confirmed a millennial-scale anti-correlation of Asian winter and summer monsoons in the Late Holocene epoch. This study suggests that the evolution of the palaeo-aeolian sand dune has the potential for comprehending the history of Asian monsoon across the desert regions of the modern Asian monsoonal margin in northern China.  相似文献   

山东黄金西岭勘查区深部勘探孔防斜与纠斜措施          下载免费PDF全文

潘垚 《探矿工程》2018,45(3):37-41

西岭勘查区金矿找矿工作已全面进入勘探阶段,勘查区网度为80 m×80 m,对于钻孔质量要求十分严格：终孔靶点偏差不超过勘探网度的四分之一,即不超过20 m。对于西岭勘查区设计孔深均超过1500 m（部分钻孔设计甚至超过2500 m）的钻孔而言,这种要求远远超过地质岩心钻探规程要求。山东黄金地勘公司根据多年深孔施工经验,在防斜与纠斜方面均取得了一些突破,自主研发了钻具扶正器、独创了钻孔纠斜法,形成了一套实用的钻孔质量保证措施。  相似文献