汉源县大渡河“8.6”崩塌堵河灾害研究   总被引：2，自引：0，他引：2  

葛永刚  陈兴长  方华  裴来政 《山地学报》2010,28(1)

2009-08-06四川省汉源县顺河乡猴子岩发生大型崩塌,90余万m~3崩塌体直接冲进大渡河,形成40 m高的堰塞坝,阻断大渡河,形成库容达6 000×10~4 m~3堰塞湖,导致2人死亡,29人失踪和重大财产损失.以现场调查与观测为基础,分析灾害发育条件和成灾过程,认为高陡边坡次级断裂造成的岩体破裂是崩塌发育的基础条件,"5.12"汶川大地震、强降雨及道路工程建设造成的边坡失稳是灾害发生的重要原因.针对崩塌堵河灾害的成灾特点,提出加强山区重大工程区地质灾害评价、预防、预警,科学设计、施工减少陡坡开挖,采取果断措施处置施工过程中出现的险情、灾情,及时在灾害点设置警示标志减少灾害损失等减灾对策.  相似文献   

拉萨市夏季大气降尘单颗粒矿物组成及其形貌特征   总被引：3，自引：0，他引：3       下载免费PDF全文

张学磊  邬光剑  岳雅慧  张成龙 《岩石矿物学杂志》2011,30(1):127-134

应用带能谱的电子扫描电镜(SEM-EDX)对拉萨市夏季正常天气下收集的大气自然沉降气溶胶样品进行分析,研究了拉萨市大气降尘矿物组成和各种物相形貌特征信息。拉萨市大气颗粒物含有硅酸盐颗粒、富钙颗粒、富铁颗粒、富碳颗粒(燃煤飞灰颗粒和燃油飞灰颗粒)和植物残体颗粒。根据颗粒物数量统计发现拉萨市大气颗粒物以硅酸盐颗粒为主,富钙颗粒和富铁颗粒次之,需要指出的是以燃油飞灰为主的富碳颗粒已占到一定比重,说明以燃油为主的机动车尾气对拉萨大气污染在加强。研究结果表明,大气降尘矿物成分及其形貌特征可以用作判定污染物来源的重要标志,拉萨大气中颗粒来源的多样性决定了治理措施也应综合进行。  相似文献   

多重散射问题的改进算法以及双排非连续弹性屏障对水平向剪切波的隔离研究     

夏唐代  孙苗苗  陈晨 《岩土力学》2011,32(8):2402-2408

与Aviles等学者的多重散射隔振理论相比较,采用更为完整的Fourier-Bessel函数系的级数展开表达式来研究弹性波入射下的多重散射问题。引入Graf加法定理,并结合位移和应力边界条件,推导了无限均匀弹性介质中任意分布的多个弹性圆柱体对于平面水平向剪切波(SH波)入射时散射系数的理论解析解。随后,取圆柱体分布于两条相互平行的直线上,则问题演变为双排弹性桩屏障对于弹性波的隔离问题。引入无量纲位移(屏障后土体总的位移与仅由入射平面水平向剪切波引起的位移的比值)和透射系数(屏障宽度范围内无量纲位移的几何平均值)的概念来研究屏障的隔振效果。重点讨论了双排桩间距h以及桩土的剪切模量比ξ对于屏障整体隔振效果的影响,阐述了双排桩屏障的隔振性状。特别地,当h=0时,该问题退化为常见的单排非连续屏障的隔振问题。  相似文献   

砂质海滩地形动力分类研究进展     

于吉涛  陈子燊 《热带地理》2011,31(1):107-112

海滩状态是一个地形与水动力相互作用的三维地形动力问题.国外对海滩状态的地形动力分类已开展了大量卓有成效的研究工作,既包括波控、小潮、开阔海岸海滩状态的研究,也包括波控、不同潮差海岸海滩类型的研究和岬间海岸海滩类型的研究.文中回顾并概括了自20世纪70年代至今国外在砂质海滩地形动力分类方面代表性的研究工作,这些对于我国的...  相似文献   

1981—2020年贵州省降雪时空分布特征          下载免费PDF全文

王芬  刘芷含  孟庆怡  李腹广  管玥 《气象与减灾研究》2022,45(3):172-178

利用1981—2020年贵州省降雪日数、初始日期、终止日期资料,分析了贵州降雪的气候特征,以及降雪日数与海拔高度、纬度的关系。结果表明：1） 贵州降雪日数西北多、南少,大值中心位于贵州西北部;降雪日数整体偏少,呈逐渐减小的趋势,2012年为突变点,整体上降雪日数每10 a减少1.6 d。降雪从11月开始出现,持续到次年3月,主要集中在冬季;开始时间集中在08—10时和20—21时;降雪具有明显的间歇性特征,降雪天气过程中仅发生1次降雪的占全部降雪过程的48.1%,主要在贵州南部,持续3 d及以上的过程集中在贵州中北部。2） 降雪初始日期集中在12、1月,最早11月;终止日期集中在2、3月,最晚4月。贵州中北部开始降雪多为12月,终止降雪多为2月;南部初始多为1月,终止降雪多为1—2月。贵州中北部降雪期更长,开始到结束间隔约为60—129 d,而南部大部为40 d以下,全省平均54 d。3） 降雪日数随着海拔高度每升高100 m增加2.3 d,纬度每增加1°增加11.4 d。  相似文献   

A laboratory study of the self sealing behaviour of a compacted sand–bentonite mixture     

《Geomechanics and Geoengineering》2013,8(1):73-85

Bricks made of compacted sand–bentonite mixture are considered as a possible engineered barrier to isolate high-level radioactive waste at great depth. This work is aimed at investigating some specific effects related to the presence of discontinuities at the contact between the bricks and the excavation wall. In order to do this, an experimental device was developed in the laboratory. The model is made up of a specially designed infiltration cylinder which allows the precise definition of a planar discontinuity between the compacted specimen (a sand–bentonite mixture made up of sand and Kunigel clay from Japan) and a metal wall. During hydration and subsequent specimen swelling, the planar wall is filled, resulting in a healing process. Three total pressure gauges placed along the wall allow a detailed observation of the increase in total stress against the wall. After different periods of swelling, the maximum resistance of the specimen–wall interface to pressure was tested by imposing a pressure increase through a porous stone placed at one end of the cylinder. It was found that the maximum pressure supported by the interface is a function of the initial thickness of the discontinuity and the initial density of the specimen. It was also found that the maximum sustainable pressure depends linearly on the elapsed time. These results are of interest for optimizing water infiltration procedures in either mock-up tests or real disposal systems. If the maximum sustainable pressure at the interface is known, it is possible either to ensure homogeneous hydration of a mass of bricks by respecting the maximum injection pressure limit or to accelerate hydration by forcing water paths along the discontinuities.  相似文献   

Calibration of the specific barrier model to Iranian plateau earthquakes and development of physically based attenuation relationships for Iran   总被引：1，自引：0，他引：1  

H. Zafarani  M. Mousavi  As. Noorzad  A. Ansari 《Soil Dynamics and Earthquake Engineering》2008,28(7):550-576

Earthquake ground-motion relationships for soil and rock sites in Iran have been developed based on the specific barrier model (SBM) used within the context of the stochastic modeling and calibrated against up-to-date Iranian strong-motion data. A total of 171 strong-motion accelerograms recorded at distances of up to 200 km from 24 earthquakes with moment magnitudes ranging from Mw 5.2 to 7.4 are used to determine the region-specific source parameters of this model. Regression analysis was conducted using the “random effects” methodology that considers both earthquake-to-earthquake (inter-event) variability and within-earthquake (intra-event) variability to effectively handle the problem of weighting observations from different earthquakes. The minimization of the error function in each iteration of the “random effects” procedure was performed using the genetic algorithm method. The residuals are examined against available Iranian strong-motion data to confirm that the model predictions are unbiased and that there are no significant residual trends with distance and magnitude. No evidence of self-similarity breakdown is observed between the source radius and its seismic moment. To verify the robustness of the results, tests were performed to confirm that the results are unchanged if the number of observations is changed by removing different randomly selected datasets from the original database. Stochastic simulations, using the derived SBM, are then performed to predict peak ground-motion and response spectra parameters for a wide range of magnitudes and distances. The stochastic SBM predictions agree well with the new empirical regression equations proposed for Iran, Europe and Middle East in the magnitude–distance ranges well represented by the data. It has been shown that the SBM of this study provides unbiased ground-motion estimates over the entire frequency range of most engineering interests (1–10 Hz) for the Iranian earthquakes. Our results are also important for the assessment of hazards in other seismically active environments in the Middle East and Mediterranean regions.  相似文献   

A local model for analysis of pump and treat systems with vertical barrier walls     

Elizabeth Mesa  Erik I. Anderson 《Advances in water resources》2008

We present a mathematical model of local, steady groundwater flow near a vertical barrier wall. Flow features represented in the model include an impermeable arc-shaped barrier wall and multiple wells; distant boundary conditions are not included explicitly, but their effects on the local flow field are modelled by specifying a uniform flow at infinity and a constant areal recharge within a local domain. We develop an explicit closed-form solution to the boundary-value problem using the analytic element method. The solution is an extension of a harmonic solution presented by Anderson and Mesa [Anderson EI, Mesa E. The effects of vertical barrier walls on the hydraulic control of contaminated groundwater. Adv Water Resourc 2006;29(1):89–98] which does not include the effects of recharge. We demonstrate that the general solution with recharge consists of the harmonic solution superposed on a special case of the harmonic solution along with two elementary one-dimensional flow solutions. The results are used to investigate the effects of areal recharge on the capture zone envelopes of the pumping wells and on the reduction in discharge that can be achieved by including a barrier wall in a pump and treat design. We find that the benefits of including an open barrier wall in a design, measured as a reduction in the pumping rate required to contain a plume, increase for higher recharge rates. Dimensionless plots of capture zone envelopes are presented for a practical well and barrier wall configuration.  相似文献   

Quantifying volcanic ash fall hazard to electricity infrastructure     

Mark Bebbington  Shane J. Cronin  Ian Chapman  Michael B. Turner 《Journal of Volcanology and Geothermal Research》2008

Quantifying the potential ash fall hazards from re-awakening volcanoes is a topic of great interest. While methods for calculating the probability of eruptions, and for numerical simulation of tephra dispersal and fallout exist, event records at most volcanoes that re-awaken sporadically on decadal to millennial cycles are inadequate to develop rigorous forecasts of occurrence, much less eruptive volume. Here we demonstrate a method by which eruption records from radiocarbon-dated sediment cores can be used to derive forecasting models for ash fall impacts on electrical infrastructure. Our method is illustrated by an example from the Taranaki region of New Zealand. Radiocarbon dates, expressed as years before present (B.P.), are used to define an age-depth model, classifying eruption ages (with associated errors) for a circa 1500–10 500 year B.P. record at Mt. Taranaki (New Zealand). In addition, data describing the youngest 1500 years of eruption activity is obtained from directly dated proximal deposits. Absence of trend and apparent independence in eruption intervals is consistent with a renewal model using a mix of Weibulls distributions, which was used to generate probabilistic forecasts of eruption recurrence. After establishing that interval length and tephra thickness were independent in the record, a thickness–volume relationship (from [Rhoades, D.A., Dowrick, D.J., Wilson, C.J.N., 2002. Volcanic hazard in New Zealand: Scaling and attenuation relations for tephra fall deposits from Taupo volcano. Nat. Hazards, 26:147–174]) was inverted to provide a frequency–volume relationship for eruptions. Monte Carlo simulation of the thickness–volume relationship was then used to produce probable ash fall thicknesses at any chosen site. Several critical electrical infrastructure sites in the Taranaki Region were analysed. This region, being the only gas and condensate-producing area in New Zealand, is of national economic importance, with activities in and around the area depending on uninterrupted power supplies. Forecasts of critical ash thicknesses (1 mm wet and 2 mm dry) that may cause short-circuiting, surges or power shutdowns in substations show that the annual probabilities of serious impact are between ~ 0.5% and 27% over a 50 year period. It was also found that while large eruptions with high ash plumes tend to affect “expected” areas in relation to prevailing winds, the direction impacts of small ash falls are far less predictable. In the Taranaki case study, areas out of normal downwind directions, but close to the volcano, have probabilities of impact for critical thicknesses of 1–2 mm of around half to 60% of those in downwind directions and therefore should not be overlooked in hazard analysis. Through this method we are able to definitively show that the potential ash fall hazard to electrical infrastructure in this area is low in comparison to other natural threats, and provide a quantitative measure for use in risk analysis and budget prioritisation for hazard mitigation measures.  相似文献   

Coeval strombolian and vulcanian-type explosive eruptions at Panarea (Aeolian Islands,Southern Italy)     

C. Cimarelli  D. De RitaD. Dolfi  M. Procesi 《Journal of Volcanology and Geothermal Research》2008

In this paper, we document the evolution of the emergent Panarea dome in the Aeolian islands (Southern Italy), placing particular emphasis on the reconstruction of the explosive events that occurred during the final stage of its evolution. Two main pyroclastic successions exposing fall deposits with different compositions have been studied into detail: the andesitic Palisi succession and the basaltic Punta Falcone succession. The close-in-time deposition of the two successions, the dispersal area and grain-size distribution of the deposits account for their attribution to vents located in the western sector of the present island and erupting almost contemporaneously. Vents could have been aligned along NNE-trending regional fracture systems controlling the western flank of the dome and possibly its collapse. Laboratory analyses have been devoted to the characterization of the products of the two successions that have been ascribed to vulcanian- and to strombolian-type eruptions respectively. The vulcanian eruption started with a vent-clearing phase that occurred by sudden decompression of a pressurized magma producing ballistic bombs and a surge blast and the development of a vulcanian plume. Vulcanian activity was almost contemporaneous to strombolian-type fall-out eruptions. The coeval occurrence of basaltic and andesitic eruptions from close vents and the presence of magmatic basaltic enclaves in the final dacitic lava lobe of the dome allow us to speculate that the intrusion of a basaltic dyke played a major role in triggering explosive eruptions. The final explosive episodes may have been caused by extensional tectonics fracturing the roof of a zoned shallow magma chamber or by the intrusion of a new basaltic magma into a more acidic and shallow reservoir. Intrusion most likely occurred through the injection of dykes along the western cliff of the present Panarea Island inducing the collapse of the western sector of the dome.  相似文献