Calibration of LRFD Format for Steel Jacket Offshore Platforms in China Offshore Area （ 1 ） ： Statistical Parameters of Loads and Resistances     

段忠东周道成  欧进萍 《中国海洋工程》2006,20(1):1-14

1 .IntroductionThe structural design method has evolvedfromthe workingstress method,damage stage methodtolimit state method.The more recent probabilisticlimit state design method,whichis based onreliabili-tytheory,has beengenerallyacceptedinthe designcode…  相似文献   

Dynamic Analysis of A Pontoon-Separated Floating Bridge Subjected to A Moving Load   总被引：2，自引：1，他引：2  

王琮  付世晓李宁崔维成  林铸明 《中国海洋工程》2006,20(3):419-430

1 .Introduction Since the most significant feature of a movingloadisits mobility,the interaction betweenthe ve-hicle and bridge is very complicated,which can be classified as a coupled vibration problem.There-fore ,much attention has been paid to the dyna…  相似文献   

随机载荷下的疲劳损伤计算公式     

伍义生 《海洋工程》1994,(1)

本文推导了随机载荷下的疲劳损伤计算公式。数值计算结果表明：Ｐ．Ｈ．Ｗｉｒｓｃｈｉｎｇ给出的公式在宽带情况下与实际情况不符；Ｇ．Ｃｈａｕｄｈｕｒｙ给出的公式在窄带情况下与实际不符；本文绘出的公式不仅适合于窄带，也适合于具有各种不同带宽的宽带随机载荷。  相似文献   

复合加载模式作用下地基承载性能数值分析   总被引：11，自引：3，他引：11  

栾茂田  赵少飞  袁凡凡  吕爱钟  武科 《海洋工程》2006,24(1):34-40

确定竖向荷载(V)、水平荷载(H)和力矩(M)共同作用下建筑物地基的破坏模式及在荷载空间(H,V,M)中的破坏包络面是地基设计中的关键问题。为提高Swipe试验方法计算精度,提出了改进方案,进而利用有限元方法分析了复合加载模式作用下均质粘性土地基上条形基础的破坏包络面。计算表明,基于改进Swipe试验方法的数值模拟结果明显好于常规Swipe试验方法。针对海洋工程中实际复合加载模式的特点,探讨了竖向荷载分量V对地基破坏模式和H-M荷载平面上的破坏包络线的影响,结果表明竖向荷载分量显著地改变了地基的破坏模式及包络线的形状。  相似文献   

潜艇疲劳载荷的概率模型   总被引：1，自引：0，他引：1  

黄小平  崔维成 《海洋工程》2003,21(3):18-23

探讨了建立潜艇疲劳载荷概率模型的方法，引入了正态分布和两参数威布尔分布两种概率模型。两参数威布尔分布较适合于用来描述潜艇下潜深度分布的概率特征。可根据潜艇的设计参数、任务及航行区域等因素来选取最可能的分布形式获得潜深分布密度函数。潜艇疲劳热点部位的应力(应变)幅值分布，可由应力(应变)和潜深的关系通过相应的变换得到。  相似文献   

Rain-Flow and Reverse Rain-Flow Counting Method for the Compilation of Fatigue Load Spectrum     

宋玉普  王立成  李朝阳 《中国海洋工程》2001,(3):429-435

The rain-flow counting method is widely used to compile the fatigue load spectrum. The second stage counting of the rain-flow method is a troublesome process. In order to overcome this drawback, the rain-flow and reverse rain-flow counting method is proposed in this paper. In this counting method, the rule for counting of the rain-flow method is modified, so that the sequence of load-time need not be adjusted. This is a valid and useful method to count cycles and compile the load spectrum and it can be widely used in ocean engineering.  相似文献   

GIS在海洋气象服务中的应用     

梁忠  林乔木  姚忠山 《海洋技术学报》2007,26(4):102-105

海洋经济的发展越来越离不开海洋气象服务,随着GIS、Web服务等计算机和船舶通讯技术的发展,海洋气象服务正面临着新的机遇,以GIS为支撑的海洋气象信息库的建立变得日益现实,它的出现不仅有助于人们直观理解和分析大气海洋环境特征的分布情况,克服目前我国海洋气象服务的种种困难,而且必将有助于揭示海区气象环境的变化规律,增强目前海洋气象灾害的监测能力,提高海洋天气预报的水平。  相似文献   

Prediction of Load Carrying Capacity of Corroded Reinforced Concrete Beam     

范颖芳  周晶冯新 《中国海洋工程》2004,18(1):107-118

A novel method for prediction of the load carrying capacity of a corroded reinforced concrete beam (CRCB) is presented in the paper. Nine reinforced concrete beams, which had been working in an aggressive environment for more than 10 years, were tested in the laboratory. Comprehensive tests, including flexural test, strength test for corroded concrete and rusty rebar, and pullout test for bond strength between concrete and rebar, were condueted. The flexural test results of CRCBs reveal that the distribution of surface cracks on the beams shows a fractal behavior. The relationship between the fractal dimensions and mechanical properties of CRCBs is then studied. A prediction model based on artificial neural network (ANN) is established by the use of the fractal dimension as the corrosion index, together with the basic intbrmation of the beam. The validity of the prediction model is demonstrated through the experimental data, and satisfactory resuits are achieved.  相似文献   

底部浮泥表层推移速度分布的ADCP—GPS估测方法   总被引：3，自引：0，他引：3  

吴中  陈力平等 《海洋工程》2002,20(4):85-88

ADCP对底跟踪走航观测的流速数据中包含水体底部浮泥、底沙运动信息,对比GPS定位方法算出的水体流速数据可以分离出浮泥相对于GPS定位的运动信号,从而达到对底质推移观测的目的。  相似文献   

Two-Dimensional Mathematical Model of Tidal Current and Sediment for Oujiang Estnary and Wenzhou Bay   总被引：1，自引：0，他引：1  

LU  Yongjun 《中国海洋工程》2002,16(1):107-122

A 2-D mathematical model of tidal current and sediment has been developed for the Oujiang Estuary and the WenzhouBay. This model accomodates complicated features including multiple islands, existence of turbidity, and significant differ-ence in size distribution of bed material. The governing equations for non-uniform suspended load and bed load transport arepresented in a boundary-fitted orthogonal curvilinear coordinate system. The numerical solution procedures along with theirinitial conditions, boundary conditions, and movable boundary technique are presented. Strategies for computation of thecritical condition of deposition or erosion, sediment transport capacity, non-uniform bed load discharge, etc. are suggested.The model verification computation shows that, the tidal levels computed from the model are in good agreement with the fielddata at the 18 tidal gauge stations. The computed velocities and flow directions also agree well with the values measuredalong the totally 52 synchronously observed verticals distributed over 8 cross sections. The computed tidal water throughputsthrough the Huangda‘ao cross section are close to the measured data. And the computed values of bed deformation fromYangfushan to the estuary outfall and in the outer-sea area are in good agreement with the data observed from 1986 to 1992.The changes of tidal volumes through the estuary, velocities in different channels and the bed form due to the influence of thereclamation project on the Wenzhou shoal are predicted by means of this model.  相似文献