A LAYERED NUMERICAL MODEL FOR SIMULATING THE GENERATION AND PROPAGATION OF INTERNAL TIDES OVER CONTINENTAL SLOPE I. MODEL DESIGN     

中国海洋湖沼学报 《中国海洋湖沼学报》1999,17(2)

A layered three-dimensional nonlinear numerical model was constructed to simulate the generation and propagation of internal tides over the continental slope. The simulation was split into external mode computation (EMC) and internal mode computation (IMC) to minimize the computational load. IMC was carried out once after EMC was implemented N times. As to EMC, a semi-implicit numerical scheme was applied in such a way that the pressure gradient terms and the velocity divergence terms were discretized semi-implicitly, but the other terms were discretized explicitly. Eulerian-Lagrangian explicit discretization was applied to the convective terms simultaneously. As a result, the stability of EMC did not depend on the wave celerity and time step was not limited by the CFL condition. More than that, use of the conjugate gradient accelerated Jacobi method further improved the computational efficiency of the model.  相似文献   

非球形轴对称粒子光散射的散射矩阵元素展开系数的数值计算     

丁继烈  许丽生 《成都信息工程学院学报》1999,(3)

扼要地介绍了非球形粒子光散射的散射矩阵元素按广义球函数展开的基本理论，以及球形粒子散射矩阵元素间的关系。在此基础上较详细地阐述了计算展开系数的方法以及在程序研制中所遇到的一些问题。最后，对非球形的Ｃｈｅｂｙｓｈｅｖ粒子光散射的散射矩阵元素的展开系数进行了计算，结果表明数值技术和计算的正确性。  相似文献   

Reply to the discussion by Conti R., De Sanctis L. and Viggiani G.M.B. on ‘Influence of diaphragm wall installation on the numerical analysis of deep excavation’ by Burlon S., Mroueh H. & Shahrour I.     

S. Burlon  H. Mroueh  I. Shahrour 《国际地质力学数值与分析法杂志》2013,37(11):1688-1690

The authors thank the discussers R.Conti, L.De Sanctis and G.M.B.Viggiani for their interest to the paper entitled ‘Influence of diaphragm wall installation on the numerical analysis of deep excavation’ and for providing the opportunity to submit additional information to clarify some issues. The authors broadly agree with the comments which deal with three main aspects of the paper: presence of water and type of analysis, constitutive modelling and numerical strategies. The present reply addresses some additional issues that the discussers find not clear on the original paper submitted by the writers. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

A two‐dimensional model of hydraulic performance of stormwater infiltration systems     

D. Browne  A. Deletic  G. M. Mudd  T. D. Fletcher 《水文研究》2013,27(19):2785-2799

Stormwater infiltration systems are a popular method for urban stormwater control. They are often designed using an assumption of one‐dimensional saturated outflow, although this is not very accurate for many typical designs where two‐dimensional (2D) flows into unsaturated soils occur. Available 2D variably saturated flow models are not commonly used for design because of their complexity and difficulties with the required boundary conditions. A purpose‐built stormwater infiltration system model was thus developed for the simulation of 2D flow from a porous storage. The model combines a soil moisture–based model for unsaturated soils with a ponded storage model and uses a wetting front‐tracking approach for saturated flows. The model represents the main physical processes while minimizing input data requirements. The model was calibrated and validated using data from laboratory 2D stormwater infiltration trench experiments. Calibrations were undertaken using five different combinations of calibration data to examine calibration data requirements. It was found that storage water levels could be satisfactorily predicted using parameters calibrated with either data from laboratory soils tests or observed water level data, whereas the prediction of soil moistures was improved through the addition of observed soil moisture data to the calibration data set. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Influence of size on the constitutive equations of concrete or rock dowels     

Letícia Fleck Fadel Miguel  Jorge Daniel Riera  Ignacio Iturrioz 《国际地质力学数值与分析法杂志》2008,32(15):1857-1881

The numerical fracture analysis of non‐homogeneous rock or concrete dowels subjected to shear and compression is described in detail. The method of analysis allows the consideration of scale and rate effects due to material non‐homogeneity and fracture. The proposed approach is verified by comparing numerical predictions with experimental results reported in the literature for a series of small rock samples, since experimental evidence for large bodies is not yet available (2007). Results generated by Monte Carlo simulation using the so‐called discrete element method to model the dowels suggest that a simple three parameters law can be used to predict the relationship between tangential stress at the base and lateral distortion. It is observed that the larger the size of the cubes, the smaller both the peak tangential stress and the rupture distortion. Size effects are also evaluated in samples with vertical restraint. The influence of loading rate is likewise numerically assessed for two sample sizes. The effect is compatible with experimental evidence available for concrete using small samples. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

基于兰利法的泥石流临界雨量实验研究     

江兴旺  文丽敏  张骏 《地球科学与环境学报》2000,22(4)

分析了目前泥石流临界雨量确定常用方法存在的问题 ,以及泥石流临界雨量实验研究中实验降雨量确定的随意性和盲目性 ,提出以兰利 ( Langlie)法为指导进行实验 ,使实验降雨量的确定有了理论依据 ,减少了取得可靠实验结果所需实验次数 ,从而使泥石流临界雨量实验研究更趋完善和可行  相似文献   

Investigation on strength and stability of jointed rock mass using three‐dimensional numerical manifold method     

L. He  X. M. An  X. B. Zhao  Z. Y. Zhao 《国际地质力学数值与分析法杂志》2013,37(14):2348-2366

This paper proposes a numerical model for jointed rock masses within the 3‐D numerical manifold method (NMM) framework equipped with a customized contact algorithm. The strength of rock sample containing a few sets of discontinuities is first investigated. The results of models with simple geometries are compared with the available analytical solutions to verify the developed computer code, whereas models with complex geometries are simulated to better understand the fundamental behavior and failure mechanism of jointed rock mass. Furthermore, the stability of jointed rock mass in an underground excavation is studied, where rock failure process is determined by the 3‐D NMM simulation. The simulation results provide valuable guidance on excavation process design and stabilization design in rock engineering practice. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Ensemble rainfall forecasting with numerical weather prediction and radar‐based nowcasting models     

Shan He  Srivatsan V. Raghavan  Ngoc Son Nguyen  Shie‐Yui Liong 《水文研究》2013,27(11):1560-1571

The overall objective of this study is to improve the forecasting accuracy of the precipitation in the Singapore region by means of both rainfall forecasting and nowcasting. Numerical Weather Predication (NWP) and radar‐based rainfall nowcasting are two important sources for quantitative precipitation forecast. In this paper, an attempt to combine rainfall prediction from a high‐resolution mesoscale weather model and a radar‐based rainfall model was performed. Two rainfall forecasting methods were selected and examined: (i) the weather research and forecasting model (WRF); and (ii) a translation model (TM). The WRF model, at a high spatial resolution, was run over the domain of interest using the Global Forecast System data as initializing fields. Some heavy rainfall events were selected from data record and used to test the forecast capability of WRF and TM. Results obtained from TM and WRF were then combined together to form an ensemble rainfall forecasting model, by assigning weights of 0.7 and 0.3 weights to TM and WRF, respectively. This paper presented results from WRF and TM, and the resulting ensemble rainfall forecasting; comparisons with station data were conducted as well. It was shown that results from WRF are very useful as advisory of anticipated heavy rainfall events, whereas those from TM, which used information of rain cells already appearing on the radar screen, were more accurate for rainfall nowcasting as expected. The ensemble rainfall forecasting compares reasonably well with the station observation data. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

NUMERICAL SIMULATION OF THE KUROSHIO USING NESTED MODEL OF THREE-DIMENSIONAL BAROCLINIC CIRCULATION     

李毓湘  蔡怡 《中国海洋湖沼学报》1999,17(1):19-27

ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅＫｕｒｏｓｈｉｏｉｓｔｈｅｗｅｓｔｅｒｎｂｏｕｎｄａｒｙｃｕｒｒｅｎｔｉｎｔｈｅＮｏｒｔｈＰａｃｉｆｉｃａｎｄｉｓｔｈｅｃｏｕｎｔｅｒｐａｒｔｏｆｔｈｅＧｕｌｆＳｔｒｅａｍｉｎｔｈｅＮｏｒｔｈＡｔｌａｎｔｉｃ.ＴｈｅｏｒｉｇｉｎｏｆｔｈｅＫｕｒｏｓｈｉｏｉｓｔｈｅｎｏｒｔｈｗａｒｄｆｌｏｗｉｎｇｂｒａｎｃｈｏｆｔｈｅＮｏｒｔｈＥｑｕａｔｏｒｉａｌＣｕｒｒｅｎｔｗｈｉｃｈｉｓｄｉｖｉｄｅｄｉｎｔｏｔｗｏｃｕｒｒｅｎｔｓｏｎａｐｐｒｏａｃｈｉｎｇｔｈｅｗｅｓｔｅｒｎｂｏ…  相似文献   

Copper‐gold mineralisation in New Guinea: Numerical modelling of collision,fluid flow and intrusion‐related hydrothermal systems     

P. A. Gow  P. Upton  C. Zhao  K. C. Hill 《Australian Journal of Earth Sciences》2013,60(4):753-771

Two‐ and three‐dimensional numerical modelling techniques, constrained by key geodynamic data, provide insights into the controls on development of porphyry‐related Cu–Au mineralisation in the Tertiary collision zone of New Guinea. Modelling shows that the creation of local dilation to facilitate magma emplacement can be caused by reactivation of arc‐normal transfer faults, where they cut the weakened fold belt. Additionally, dilation occurs where fluid overpressuring is caused by collision‐related, south‐directed fluid flow being localised into the more permeable units of the Mesozoic passive‐margin sedimentary succession. Rapid uplift and erosion, which may be a mechanism for magmatic fluid release in these systems, is shown to be greatest in the west of West Papua, where the stronger Australian crust acts as a buttress. Within the Papuan Fold Belt, uplift is greatest near the margins, where the weaker fold belt abuts the stronger crust and/or major faults have been reactivated. Increased orographically induced precipitation and erosion exposes the lower parts of the stratigraphy within or on the margins of these uplifted zones. On a smaller scale, 2–D coupled fluid‐flow ‐ thermal‐chemical modelling uses a scenario of fluid mixing to calculate metal precipitation distribution and magnitude around an individual intrusive complex. Modelling highlights the interdependence of the spatial permeability structure, the regional temperature gradient, and the geometry of the convection cells and how this impacts on the distribution of metal precipitation.  相似文献