Effect of sensor modelling methods on computation of 3-D coordinates from Cartosat-1 stereo data     

Mritunjay Kumar Singh  R.D. Gupta  Snehmani  Anshuman Bhardwaj  Ashwagosha Ganju 《国际地球制图》2016,31(5):506-526

The orbital and the rational polynomial coefficients (RPC) models are the two most commonly used models to compute a three-dimensional coordinates from an image stereo-pair. But it is still confusing that with the identical user provided inputs, which one of these two models provides more accurate digital elevation model (DEM), especially for mountainous terrain. This study aimed to find out the answer by evaluating the impact of used models on the vertical accuracy of DEM extracted from Cartosat-1 stereo data. We used high-accuracy photogrammetric DEM as the reference DEM. Apart from general variations in statistics, surprisingly in a few instances, both the DEMs provided contrasting results, thus proving the significance of this study. The computed root mean square errors and linear error at 90% (LE90) were lower in case of RPC DEM for various classes of slope, aspect and land cover, thus suggesting its better relative accuracy.  相似文献   

加权Logistic回归模型在火山岩型铜矿预测中的应用:以宁芜盆地中段为例          下载免费PDF全文

赵增玉  陈火根  潘懋  贾根  李向前  徐士银  郭刚  张祥云 《高校地质学报》2016,22(1):105

文中探讨了加权Logistic回归模型在宁芜盆地中段火山岩型铜矿预测中的应用。首先,结合研究区的成矿地质背景,提取地质体、构造、围岩蚀变三大类证据因子;其次,分析各证据因子与铜矿点之间的空间关系,认为姑山旋回、娘娘山旋回火山机构控制了本区火山岩型铜矿的空间分布,根据计算结果,选取与火山岩型铜矿密切相关的龙王山组、姑山组地层,姑山旋回粗面斑岩、娘娘山旋回二长斑岩、NW向构造1.5 km缓冲区、NE向构造1.3 km缓冲区、EW向构造4.5 km缓冲区、硅化、褐铁矿化、黄铜矿化等作为模型自变量;最后采用加权Logistic回归模型进行成矿概率计算,并结合成矿地质背景,圈定四个成矿远景区,分别为P1、P2、P3、P4,其中P1、P2、P3呈北东向展布,主要受娘娘山和姑山火山机构控制,P4为东西向分布,主要受龙王山火山机构控制,在这些预测区中,均存在已发现的铜矿体,说明预测可信度较高。  相似文献   

考虑地球曲率影响的重力中间层校正计算及其精度分析     

张伟  廖国忠  孙涛  张秋冬 《大地测量与地球动力学》2016,36(5):391

介绍一种考虑地球曲率影响的“球冠模型” 重力中间层校正算法,并通过不同算例对比该算法与以往“圆柱体模型”算法之间的差值。结果表明,其差值的数量级最大可达0.4 mGal。  相似文献   

Automated Extraction of a Five‐Year LA‐ICP‐MS Trace Element Data Set of Ten Common Glass and Carbonate Reference Materials: Long‐Term Data Quality,Optimisation and Laser Cell Homogeneity          下载免费PDF全文

David Evans  Wolfgang Müller 《Geostandards and Geoanalytical Research》2018,42(2):159-188

LA‐ICP‐MS is increasingly applied to obtain quantitative multi‐element data with minimal sample preparation, usually achieved by calibration using reference materials (RMs). However, some ubiquitous RMs, for example the NIST SRM 61× series glasses, suffer from reported value uncertainties for certain elements. Moreover, no long‐term data set of analyses conducted over a range of ablation and tuning conditions exists. Thus, there has been little rigorous examination of the extent to which offsets between measured and reported values are the result of error in these values rather than analytically induced fractionation. We present new software (‘LA‐MINE’), capable of extracting LA‐ICP‐MS data with no user input, and apply this to our system, yielding over 5 years of data (~ 5700 analyses of ten glass and carbonate RMs). We examine the relative importance of systematic analytical bias and possible error in reported values through a mass‐specific breakdown of fourteen of the most commonly determined elements. Furthermore, these data, obtained under a wide range of different ablation conditions, enable specific recommendations of how data quality may be improved, for example the role of diatomic gas, the effect of differential inter‐glass fractionation factors and choice of transport tubing material. Finally, these data demonstrate that the two‐volume Laurin ablation cell is characterised by no discernible spatial heterogeneity in measured trace element ratios.  相似文献   

长春地区粉质黏土导热系数与其物性参数相关性研究     

姚仁  杜立志  吕守航  沈明燮 《世界地质》2018,37(3):976-981

为研究导热系数与影响因素之间的相关关系,建立导热系数的推算公式,以长春地区粉质黏土为研究对象,对原状土样的导热系数与其物理参数之间的相关性进行回归分析。制作9个重塑土样,测其相关的参数值,以验证回归方程的适用性。结果表明,回归分析建立导热系数与2个物理参数之间的关系式不成立;考虑天然密度、含水率和孔隙度为自变量,其分别对应的相关性系数T检验显著值(Sig)都0. 05,复决定系数为0. 886,建立的回归方程成立,自变量能准确解释因变量的变化,且含水率与导热系数呈负相关,天然密度和孔隙度呈正相关。重塑土样相关参数代入回归方程得到的导热系数值与实验实测值之间相对误差低于4%,验证了该回归方程的普遍性和适用性。  相似文献   

逻辑回归模型在边坡稳定性分析中的应用     

王艳龙  杜立志  何赛  蔡伟嘉 《世界地质》2018,37(3):945-951

采用逻辑回归模型和确定性系数CF建立概率模型,使用收集到的22个边坡实例,将重度、内聚力、坡角、坡高、内摩擦角和孔隙压力比六个影响因子作为自变量,边坡状态作为因变量,应用SPSS取不同的滑坡概率P与不滑坡概率1-P的比值的自然对数Z进行回归分析。将获得的滑坡概率拟合模型反馈到样本参数上,对比其误差,选取Z=±10时的函数模型对另外8组边坡进行验证,证明预测模型的合理性。  相似文献   

基于面向对象分类的稀土开采区遥感信息提取方法研究     

代晶晶  吴亚楠  王登红  令天宇  王俊华 《地球学报》2018,39(1):111-118

离子吸附型稀土矿是我国宝贵的矿产资源,运用遥感影像分类技术提取稀土开采区可以准确地实现对稀土开采状况的监测,但仅利用光谱信息往往难以保证分类精度。本文以江西寻乌稀土矿区为研究区,以IKONOS影像为数据源,应用面向对象分类方法提取了稀土开采区的遥感信息。针对稀土开采区的分布特点,选择基于边缘的分割算法进行影像分割;结合地形信息、光谱信息及几何信息建立规则集,进行特征提取;最后采用隶属度函数法实现面向对象分类,并与传统的光谱角填图分类进行对比分析。研究结果表明,面向对象分类法提取稀土开采区的总体精度为92.49%,Kappa系数为0.857 6,与传统监督分类方法相比有了很大的提高。  相似文献   

Application of Geochemistry and VNIR Spectroscopy in Mapping Heavy Metal Pollution of Stream Sediments in the Takab Mining Area, NW of Iran     

Parisa PIROOZFAR  Samad ALIPOUR  Soroush MODABBERI  David COHEN 《《地质学报》英文版》2018,92(6):2382-2394

This study considered the possibility of using visible and near infrared (VNIR) spectral absorption feature parameters (SAFPs) in predicting the concentration and mapping the distribution of heavy metals in sediments of the Takab area. In total, 60 sediment samples were collected along main streams draining from the mining districts and tailing sites, in order to measure the concentration of As, Co, V, Cu, Cr, Ni, Hg, Ti, Pb and Zn and the reflectance spectra (350–2500 nm). The quantitative relationship between SAFPs (Depth500nm, R610/500nm, R1344/778nm, Area500nm, Depth2200nm, Area2200nm, Asym2200nm) and geochemical data were assessed using stepwise multiple linear regression (SMLR) and enter multiple linear regression (EMLR) methods. The results showed a strong negative correlation between Ni and Cr with Area2200nm, a significant positive correlation between As and Asym2200nm, Ni and Co with Depth2200nm, as well as Co, V and total values with Depth500nm. The EMLR method eventuated in a significant prediction result for Ni, Cr, Co and As concentrations based on spectral parameters, whereas the prediction for Zn, V and total value was relatively weak. The spatial distribution pattern of geochemical data showed that mining activities, along with the natural weathering of base metal occurrences and rock units, has caused high concentrations of heavy metals in sediments of the Sarough River tributaries.  相似文献   

强雷暴天气的闪电和雷达回波特征个例分析     

张春燕  刘霞  高文俊  周宝琴  张国平 《热带气象学报》2021,37(3):419-426

利用粤港澳闪电定位系统、广州多普勒天气雷达和自动气象站等资料, 分析了2017年6月2日发生在广州市中北部的一次强雷暴天气过程的地闪变化特征及闪电与雷达回波特征的关系。(1)本次强雷暴天气是华南一起典型的以西南急流和切变线为环流背景的强对流天气过程。在整个雷暴生命史中以负地闪为主, 占69.3%;正闪在雷暴发展的初始和结束阶段占比较大。(2)闪电频数分布与强雷达回波区域存在着较好的对应关系, 闪电活动位置稍有提前, 地闪频数峰值的时间比雷达回波峰值时间平均提前了11.1 min。(3)回波顶高是产生闪电的先决条件, 闪电较多分布在回波顶高9~15 km范围内, 地闪频数峰值落后于回波顶高峰值12~18 min。   相似文献   

Object- and pixel-based classifications of macroalgae farming area with high spatial resolution imagery     

Yuhan Zheng  Anqi Wang  Jiang Chen 《国际地球制图》2018,33(10):1048-1063

Macroalgae plays an important role in coastal ecosystems. The accurate delineation of macroalgae areas is important for environmental management. This study compared the pixel- and object-based methods using Gaofen satellite no. 2 image to explore an efficient classification approach. Expert system rules and nearest neighbour classifier were adopted for object-based classification, whereas maximum likelihood classifier was implemented in the pixel-based approach. Normalized difference vegetation index, normalized difference water index, mean value of the blue band and geometric characteristics were selected as features to distinguish macroalgae farms by considering the spectral and spatial characteristics. Results show that the object-based method achieved a higher overall accuracy and kappa coefficient than the pixel-based method. Moreover, the object-based approach displayed superiority in identifying Porphyra class. These findings suggest that the object-based method can delineate macroalgae farming areas efficiently and be applied in the future to monitor the macroalgae farms with high spatial resolution imagery.  相似文献